Komora za preizkus udarov -80°C do +220°C

Vötsch VT 7012 S2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Vötsch Thermal Shock Test Chamber VT 7012 S2 Systems for Rapid Temperature Change Thermal shock testing examines the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to quick temperature shifts in air, with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by thermal changes allow weak points on the test specimen to be detected. - Vertical arrangement of test chambers - Ball screw drive ensures safe guidance of the specimen basket - Basket load capacity: 50 kg (VT3 7012 S2) - Specimens are secured by mesh grids on all sides of the basket - High recirculation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit; cold chamber as a temperature cycling unit - Touch panel for convenient programming and graphical display of simulation programs - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Thermal Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A External dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Year of manufacture: 2005 Protection rating: Device: IP 42 Dcedpeph Uz Uofx Adhen Control panel: IP20 Control cabinet: IP 54 Temperature performance data for single-chamber operation: Temperature range: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +/- 2 K (stabilized state) Temperature deviation spatially: +/- 2 K (in the basket, stabilized state) Heating rate hot chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate hot chamber: K/min Observation window: 355 x 355 mm Tube port: 67 mm Weight: 1000 kg Further items—new and used—can be found in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-Cooled Two-Chamber Design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change (heating): 11 K/min Cold Chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change: Heating: 2 K/min Cooling: 3 K/min Dsdpfx Aewxc I Usdhecn Test Chamber Volume: 125 liters Temperature Range Hot Chamber: +50°C to +220°C Temperature Range Cold Chamber: -80°C to +70°C Internal Dimensions (W x D x H): 470mm x 650mm x 410mm External Dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port Diameter: ∅ 67mm Power Supply: 3/N/PE AC 400V +10% 50Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Dcjdpfxjigg Hns Adhjn Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Water-cooled thermal shock test cabinet Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber internal dimensions: width 470 mm x depth 650 mm x height 410 mm External dimensions: width 930 mm x depth 2115 mm x height 1970 mm Port diameter: 67 mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! We perform the following steps in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Model: VT 7012 S2 Condition: used Dcedpjn Arc Aofx Adhen Scope of delivery: (See image) (Changes and errors in technical data and specifications excepted!) If you have further questions, we are happy to answer them by phone.