Klimatska testna komora 335 litrov z vlago

Vötsch VC 4034 -40°C..+180°C

Stanje: zelo dobro (rabljeno), Vötsch VC 4034 klimatska testna komora / temperaturna testna komora zračna hladitev Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Tip stroja: klimatska testna komora / temperaturna testna komora Prostornina testne komore: približno 335 litrov Naprodaj je rabljena klimatska testna komora Vötsch VC 4034 podjetja Vötsch Industrietechnik GmbH. Temperaturna in klimatska testna komora z zračno hladitvijo je primerna za profesionalne temperaturne in klimatske teste, simulacije okoljskih pogojev, testiranje materialov ter razvojne in obremenitvene teste. Z obsegom temperatur od -40 °C do +180 °C in obsegom vlažnosti od 10 do 98 % relativne vlažnosti ponuja naprava optimalne pogoje za ponovljive testne postopke v raziskavah, razvoju, zagotavljanju kakovosti in industriji. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Prostornina testne komore: približno 335 litrov Dimenzije testne komore: približno 580 × 765 × 750 mm (Š × G × V) Zunanje dimenzije: približno 780 × 1.758 × 1.800 mm (Š × G × V) Teža: približno 515 kg (neto) Obseg temperatur: -40 °C do +180 °C Sprememba temperature (ogrevanje): približno 3,2 K/min Ksdpfx Aezng Unjf Sjnb Sprememba temperature (hlajenje): približno 3,5 K/min Odstopanje temperature: ±0,1 do ±0,5 K Homogenost temperature: ±0,5 do ±1,5 K Obseg vlažnosti: 10 do 98 % relativne vlažnosti Odstopanje temperature pri delovanju klimatske komore: ±0,1 do ±0,3 K Homogenost temperature pri delovanju klimatske komore: ±0,5 do ±1,0 K Hladilno sredstvo: R404A Količina hladilnega sredstva: približno 2,5 kg Priklop na električno omrežje: 3/N/PE AC 400 V +10 % / 50 Hz Nazivna moč: 4,1 kW Nazivni tok: 12,5 A Oprema: Upravljanje preko na dotik občutljivega zaslona Testna komora iz nerjavečega jekla Okno v vratih Osvetlitev testne komore Stranski vhod Rešetke Sistem z zračno hladitvijo Dokumentacija / navodila za uporabo Dodatna oprema, kot je prikazano na slikah Področja uporabe: Temperaturni testi Klimatski testi Simulacije okoljskih pogojev Testiranje materialov Testiranje elektronike Zagotavljanje kakovosti Raziskave in razvoj Razvojni in obremenitveni testi Stanje: Rabljeno / Used Klimatska testna komora je v rabljenem stanju. Vizualno stanje ustreza starosti in ga je mogoče videti na slikah. Obseg dobave: Klimatska testna komora Vötsch VC 4034 Rešetke Upravljalna plošča / krmilnik Dodatna oprema, kot je prikazano na slikah Miza, ki je prikazana na fotografijah, in drugi predmeti, ki niso izrecno navedeni, niso del ponudbe. Po dogovoru je možen prevoz s špediterjem ali samostojni prevzem. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 12 kW (16,32 KM), notranja dolžina: 1.000 mm, notranja širina: 1.000 mm, notranja višina: 1.000 mm, skupna dolžina: 1.395 mm, skupna širina: 1.600 mm, skupna višina: 2.045 mm, vrsta aktuacije: električni, vrsta goriva: električni, Oprema: CE označba, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately Available ⚡ Professional Support! plus VAT, plus shipping costs. ✈️ Shipping costs will be calculated separately based on the delivery address. Please contact us for an individual transport quote. ✅ Immediately available – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized distributor for Matech products in Europe ✅ 2-year warranty Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech Powder Curing Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Immediately available ☘️ Professional curing ✅ Electrically heated powder coating oven ✅ Stock unit – ready for immediate delivery ✅ No production wait time ✅ Compact design for small and medium workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Acoustic signal at the end of curing cycle ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention due to strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Can be used with mobile workpiece trolley ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electric heating power: 12 kW ✔️ Blower capacity: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10 % ✔️ Digital heating control ✔️ Infinitely variable temperature up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm (50 mm stone wool + 100 mm fiberglass) ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Signal after process end ✔️ Control panel: 1 piece ➖➖➖➖➖ Secure this stock unit now! This unit is currently available 1 x from stock. Ideal for workshops, small production areas, and businesses looking for a reliable electric solution for professional powder coating at short notice. Kjdpfx Ajghf R Uof Sonb ➖➖➖➖➖ ✳️ Protect your liquidity! We offer various financing models. Please contact us for leasing, hire purchase, or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the service and quality advantage! ✨ Inquire now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Connected load: 18 kW, but it was completely overhauled in 2017. An inspection is possible. Ksdpsn Htktjfx Af Sonb

Stanje: dober (rabljeno), Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat (C side): 360 mm Specifications Metric US Standard Capacity: 160,000 Table length: 1250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Power: 22.5 kW Knodpewp Nv Hefx Af Sob Dimensions (approximate) Length: 2150 mm Width: 1250 mm Height: 3600 mm Weight: 7500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Leto izdelave: 2026, trajanje garancije: 12 meseci, skupna širina: 2.300 mm, skupna dolžina: 1.300 mm, skupna višina: 2.450 mm, vrsta vhodnega toka: trifazni, Powder booth, painting wall, extraction unit TQN2020 Working dimensions (mm): 2000 (W) x 2000 (H) x 400 (D) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) SPECIFICATION: • Fan output 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency of 99.9% • Control panel IP 66 • Automatic filter cleaning • Hermetically sealed lighting IP 65 • Powder reservoir Kjdpfx Ajd S N Szsf Senb Cabin available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines compared to products available on the market. Professional advice and service. Warranty. In-warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products are EC-certified. We provide our own transport – prices are set individually for each offer. We issue invoices with VAT stated separately. Short delivery times! Option to order machines in various, custom configurations and dimensions! Please contact us.

Stanje: rabljeno, Leto izdelave: 2012, Rezkalni stroji Pomik X: 700 mm Pomik Y: 420 mm Pomik Z: 380 mm HSC-stroj Število osi: 3 Rezkalni stroj / Obdelovalni center Vrtljaji vretena: 24.000 min⁻¹ Območje vrtljajev do: 24.000 min⁻¹ Izmenjevalnik orodij: 38-kratni Knjdpfxjy Nxc Ne Af Sob Pogonska moč: 20 kW Integrirana 4. os (TSUDAKOMA)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja: 240 mm, izvrtina vretena: 65 mm, največja hitrost vretena: 4.000 obr/min, pomik osi Y: 40 mm, moč vretenovega motorja: 15 W, Delovna dolžina 500 mm Maks. delovni premer 240 mm Hitrost vretena 4.000 min⁻¹ Premer izvrtine vretena 65 mm Ksdpfx Afjycubto Senb Število orodij 12 kos Pomik Y osi +/- 40 mm Krmilje FANUC 18 i TB Obratovalne ure 5.000 Glavna moč motorja 15 kW

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 20 kW - Spindle speed: 24,000 rpm Kedpfxoxcqade Af Senb - Spindle hours: 4,877 h LINEAR AXES - Travel (X/Y/Z axes): 700 / 420 / 380 mm - Rapid traverse speed (X/Y/Z): 60 m/min TOOL CHANGER - Tool changer type: Umbrella - Number of magazine tools: 25 - Tool change time: 0.9 sec TABLE - Table size: 840 / 420 mm - Max. table load: 400 kg - Distance from table to spindle nose: 200 – 580 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 16 kW WEIGHT AND DIMENSIONS - Required space: 1650 / 2950 mm - Machine height: 2550 mm - Machine weight: 3,400 kg MACHINE HOURS - Power-on hours: 14,493 h - Operating hours: 5,307 h EQUIPMENT - Control: Siemens 840D SL - Interfaces: Ethernet / RS232 / USB / PCMCIA - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant supply (IKZ) - Chip conveyor - Tool measurement probe: Renishaw OTS - Workpiece measurement probe: Renishaw OMP40-2 - Electrical transformer

Stanje: novo, številka stroja/vozila: 280261 0001, Features > Ready-to-connect CNC machine > Low noise due to maintenance-free servo motors > Ergonomically slim design > High-performance isel control with maintenance-free servo motors > Equipped with reliable linear units using steel ball screw drives > Effortless operation via height-adjustable display > Network-capable control PC with WINDOWS > User-friendly soft-lift hood Kodpfolnikkex Af Senb > Clamping of workpieces via T-slot table Options > Milling spindle 500W – 1200W > Linear tool changer station > Tool cooling as spray or air version (CoolMin) > Tool length probe > Vacuum clamping table > Maintenance unit with valve manifold > Base table with swiveling monitor and integrated keyboard > Base table suitable for installing vacuum pump, cooling unit, and further peripherals > Automatic hood opening > Safety light curtain > Why buy? Easy financing available. Contact us! The iCV 4030 EC is a compact benchtop machine featuring a proven, optimized chassis design. An optional practical base table with monitor and integrated keyboard is available. The CNC machine is modular in design; all control components, including the isel CNC controller and the control computer, are rear-mounted for easy service access. All installed linear axes are from the isel range; they operate with linear ball bearings on precision-ground steel shafts. Backlash-free precision ball screws with various leads are used for the drives. The machine table, made of surface-milled T-slot profiles, offers versatile clamping options for customized workpiece holders and clamping devices. The iCV 4030 EC is suitable for a wide range of applications and industries, and is commonly used for metal-cutting machining. A wide selection of accessories tailored to your application complements the offering.

Leto izdelave: 2016, stanje: skoraj kot novo (rabljeno), Offered is a vertical turning and grinding center VLC 100 GT, retrofitted in 2022. With the pick-up spindle unit, workpieces can be fed directly from the side-mounted conveyor belt into the working area. Thanks to its modular design, the VLC 100 can be configured for a wide range of applications. Knsdpoh Tm Duofx Af Seb The images show, for example, a combination of turning tools (block tool holders) and grinding spindles for soft or hard machining (internal, external). Depending on the workpiece or machining technology, these machining modules can easily be adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Max. workpiece diameter: 100 mm Max. workpiece height: 150 mm X-axis travel: 605 mm Z-axis travel: 530 mm PERFORMANCE Main spindle: 18 kW Grinding spindle: 12 kW TOOL HOLDER 2x block tool holders VDI / Capto Console with grinding spindle 12 kW, 60,000 rpm Price, delivery time, and machine specifications upon request.