Prednja plošča

unbekannt Typ 355 mm

Stanje: rabljeno, face plate, face plate chuck, four-jaw chuck -Hand-over in as-is condition as inspected Dwjdpfx Aajd E Tfme Hsf -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg

Stanje: rabljeno, Tornio Landonio TMU 1200 Dsdpfx Aasizxvko Hjwf

Stanje: dober (rabljeno), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cube block. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Maximum drilling diameter in solid steel (R=60): 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18–1600 Automatic feed Dwedpfx Aaeikqz Sj Hof Maximum swing (distance from column surface to spindle axis): 2230 mm Drilling radius (min – max): 660–2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base table dimensions: 2490 x 1230 mm Spindle motor power: 11 HP Weight: 9000 kg

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les Dwodpok Sat Djfx Aa Hjf +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Leto izdelave: 1977, Drilling capacity in steel (diameter): 75 mm Arm reach: 1,700 mm Workpiece height - max.: 370 - 1,700 mm Total power requirement: 12 kW Machine weight approx.: 7,000 kg Space requirements approx.: m Manufacturer: CSEPEL (Hungary) Radial drilling machine Model: RFh 75 / 2 000 Year of construction: 1977 61158 _____ Drilling capacity in steel / cast iron: 75 / 90 mm Dwodpfx Aaot Hw Uvs Hjf Tapping capacity in steel / cast iron: 60 / 70 mm Maximum arm reach approx.: 1,700 mm Maximum workpiece height: 370 to 1,700 mm Table clamping surface: 1,100 x 2,300 mm Intermediary table approx.: 600 x 1,200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Quill travel: 380 mm Vertical adjustment of arm: 950 mm Cross travel of drilling carriage: 1,500 mm Spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions approx.: 3,600 x 1,400 x 3,400 mm (height) Accessories / Special equipment: • Pre-selector switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill carriage manually adjustable, vertical arm adjustment via electric motor, feed length/drilling depth set via cams on quill vernier with automatic depth stop and quill return • Electro-mechanical clamping of arm and drilling head via push button • Coolant system integrated in sub-table • VOGEL central lubrication, intermediary table, etc. Condition: satisfactory to good – demonstration under power possible, stable machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1986, Cutting diameter: 460 mm Saw blade length: 5334 mm Cutting width: 1.3 mm Square cutting range: 320 x 320 mm Flat cutting range: 500 x 320 mm Dwsdstqqrfjpfx Aa Hof Control: minipos 807 Cutting speed: 16 - 80 m/min Saw blade dimensions: 5334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: 4150 mm roller conveyor, 2150 mm roller conveyor, bundle clamping device, chip conveyor, coolant device

Stanje: dober (rabljeno), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Spindle taper: Morse Taper 6 Spindle stroke: 390 mm Spindle speeds: 24 steps, 20 – 1400 rpm Right/left rotation Feed: 12 steps, 0.045 – 1.5 mm/rev Dwedpfx Aotzctmoa Hsf Motor power: 400 V / 14.5 kVA Arm and head clamping: electromechanical Distance from machined bed to quill: min. approx. 400 mm max. approx. 1800 mm Usable machine table with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Stanje: novo, Drilling capacity in steel ----- 50 mm Motor ----- 4 kW Speed range ----- 25 ~ 2000 rpm Spindle stroke ----- 315 mm Throat depth ----- 350 ~ 1600 mm Spindle taper ----- MT5 Spindle feed ----- 0.04~ 3.2 mm/rev Cube table ----- 630 x 500 x 500 mm Column diameter ----- 350 mm Base ----- 2400 x 1000 x 200 mm Maximum distance spindle - base ----- 350 ~ 1220 mm Weight ----- 3500 kg INCLUDES Djdpfx Aaoga Ty Nj Howf * Hydraulic clamping * Coolant system * CE plug * SCHNEIDER electrics

Stanje: rabljeno, max. diameter: 400 mm Bandsaw from KASTO Model OB 1731 Dwedpfxoih N Shj Aa Hef Videos: ?feature=share ?feature=share

Stanje: rabljeno, Leto izdelave: 1988, Cut max. 370 mm round Piece counter: yes Dwodsupmwrepfx Aa Hjf Double stroke possible