Potujoči okvir

unbekannt Spitzenhöhe 192 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Varilni aparat Carl Cloos GLC 503 Quinto SD. Skupaj so na voljo 4 naprave. Leto izdelave: 2004-2004-1999. Isdpfx Aetkuk Rjl Nstf Cena velja za 1 napravo.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw Itjdpfjupw R Asx Al Njf • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 403 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.200 mm, izvrtina vretena: 120 mm, model krmilnika: Siemens 840 Dsl, Oprema: dokumentacija / priročnik, Technical Data: Turning length: 1200 mm Chuck diameter: 350 mm X-axis travel (up/down): 200 mm Y-axis travel: 210 mm (+130/-80) Z-axis travel: 1200 mm Maximum traverse speed W/X/Y/Z (m/min): 45/40/40/46 Ball screw diameter W/X/Y/Z (mm): 40/40/40/40 Linear guide profile, B/X/Y/Z (mm): 45/45/45/55 Tool swing diameter: 700 mm Maximum distance between centers: 1200 mm Main/Counter Spindle Spindle bearing diameter: 120 mm / 160 mm Spindle bore: 65 / 105 mm Spindle through-hole diameter: 80 / 120 mm Spindle flange / spindle nose DIN 55026: A6 / A8 Drive power 100% duty cycle: 22 kW / 67.4 Drive power 40% duty cycle: 24 kW / 80 Rated speed: 1400 rpm Max. speed: 5,700 rpm Torque 100% duty cycle: 150 Nm / 585 Torque 40% duty cycle: 191 Nm / 795 C-axis resolution: 0.001° Both Turrets: Tool holder: VDI 40 Max. speed (rpm): 6000 (torque drive), 12,000 (speed drive) Max. drive power (kW): 28.5 (torque drive), 23.5 (speed drive) Max. torque (25% duty cycle) (Nm): 85 (torque drive), 56 (speed drive) Dimensions: 4500 x 2500 x 2500 mm Ijdpjvw Upcsfx Al Nstf Weight: approx. 16,000 kg Control: Siemens 840 Dsl

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0625004, Listing 24603 Technical Specifications: Iedpfxsvncqve Al Nstf - Suitable for welding steel, aluminum, special metals, Cr Ni (chrome-nickel alloys), etc. - Welding current: 450 A at 60% duty cycle; 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system by FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Intermediate connection set (machine – wire feed case): 10 m - 4-roll continuously adjustable wire feed - MIG/MAG torch package, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Welding current (stepless): 40...400 A Length: 900 mm Height: 1200 mm Total power requirement: 13.8 kVA Machine weight approx.: 180 kg Space requirement approx.: W:0.6xL:0.9xH:1.2 m Ijdpfxou Nwx Us Al Nstf MIG MAG WELDING MACHINE – Welding rectifier for use as a spare parts donor - Power range: 40A/15V to 400A/34V - Open-circuit voltage: 58V - Characteristic: Constant - Protection class: IP 23 - Insulation class: F - Water cooling Control board A5 missing

Stanje: rabljeno, Vice Jaw width: 200 mm Itsdpfx Aljdd Tpio Njf Jaw height: 80 mm Base plate: width (bottom) 250 mm Base plate: length (below) 500 mm Opening width: 250 mm Weight: 72 kg

Stanje: dober (rabljeno), Dvoranski žerjav, žerjav, električni vitel s jeklenico, dvižno vreteno, motorni kabelski vitel, motorni vitel, ročna vlečna naprava, vlečni vitel, škripec -Nazivna nosilnost: 2.000 kg z preusmeritveno škripčevnico -Hitrost dviga: 5/15/30 m/min -Jeklenica: Ø 8 mm Iodpfxsd Dzlme Al Netf -Višina dviga: pribl. 30 m -Brez upravljanja -Dimenzije: 1600/330/H470 mm -Teža: 356 kg

Stanje: rabljeno, 3-jaw wedge bar chuck FORKARDT TYPE F+160 No. 1659 181 Equivalent to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and reversible hard top jaws Itsdpfx Aljf Axpro Nef 1 set of chuck jaws consisting of base jaws and reversible soft top jaws - Central adjustment Weight: 11 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 1993, Shielded Gas Welding Machine, Shielding Gas Unit - Maximum welding current: 350 A - 2-roller drive - Air-cooled - Incl. ground cable - With detachable wire feeder - Gas regulator - Hose package: 2.8 m - Dimensions: 1100/640/H1090 mm - Weight: 190 kg Ijdpfxob Uw Nrj Al Nstf

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machinable length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm SUB OPERATION - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V Itsdpfxswgpchj Al Njf - Total installed power: 13 kVA DIMENSIONS AND WEIGHT - Required floor space: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC control: Fanuc PNC DECO - Driven tools on: S2, S3, S5 vertical + horizontal - Driven guide bushing - Parts catcher - Chip conveyor - Coolant tank - Bar feeder: IEMCA MINI BOSS 325