Stroj vice

unbekannt Spannweite 255 mm

Stanje: rabljeno, Leto izdelave: 2003, x-travel: 760 mm Gedpfx Anot U Rm Uelsiu y-travel: 290 mm z-travel: 370 mm Speed: 60 - 4200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Space requirement approx.: 2.05 x 1.63 x 2.07 m The MF1 universal milling machine series impresses with its design and has become indispensable in many repair shops as well as training and production departments. The X-axis is equipped with a continuously variable feed unit, and the swiveling vertical milling head features a wide, stepless speed range for machining steel and non-ferrous metals. Standard equipment includes automatic quill feed, pneumatic tool clamping, and a digital position display. ·Swivel and tilting milling head with quill feed ·Pneumatic tool clamping device ·Continuously variable spindle speed ·Rapid feed in X-axis ·Comprehensive standard accessories

Stanje: rabljeno, Mounting: MK 4 Gsdpfx Asb N Ezrsnleiu

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 Gjdjirax Uopfx Anljiu -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Gedpfxsfx Hv Hj Anloiu Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 025137, Offer 24190 Technical Specifications: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Quill stroke: 140 mm - 8 spindle speeds: 100 – 2,900 rpm - Min. / max. distance spindle / table: 110 / 405 mm - Lighting - Quick-action drill chuck - Coolant system - Machine vice - Machine base - Drive: 400 V / 0.75 kW Gjdpfxewyl H No Anloiu - Required space (W x H x D): 400 x 1250 x 600 mm - Approx. weight: 200 kg

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Dvižna višina: 214 metrov (21,4 bar) Giedeibwarepfx Anlsu Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Pogonska moč: 30 kW Hitrost vrtenja: 2935 obr/min ! Cena na kos !

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: bež, moč: 513 kW (697,49 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 408 kW (554,72 KM), nazivna (navidezna) moč: 510 kVA, neprekinjena moč: 368 kW (500,34 KM), skupna dolžina: 4.460 mm, skupna širina: 1.606 mm, skupna višina: 2.493 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Doosan, vrsta hlajenja: voda,

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Gsdpfx Aoh Hvk Aenloiu Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Gedpfx Anocc D Ddjlsiu Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: zelo dobro (rabljeno), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - Heidenhain 3-axis Aktiv digital display, Type TNC 113 - Infinitely variable feed on X, Y and Z axes - Quill travel on vertical milling head: 60 mm Gsdoyll A Tspfx Anlsiu - Vertical milling head tiltable and extendable 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication - Machine vise - Various tool holders/collets/tools Required installation space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos showing the geometry can be provided upon request. Backlash Y-axis: 0.1mm Backlash X-axis: 0.2mm Backlash Z-axis: 0.15mm Runout horizontal spindle: 0.001mm Runout vertical spindle: 0.001mm Deviation parallelism Y-axis: 0.002mm (measuring length 150mm) Deviation parallelism X-axis: 0.01mm (measuring length 300mm) Videos demonstrating the geometry measurement can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various add-on parts - Machine reconditioned - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out