Orodje za upogibanje R3

unbekannt Länge 572 mm

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Rsdpfx Aefx Hv Hjd Tobt Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: rabljeno, številka stroja/vozila: 12216, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor Rsdpeh D Imiefx Ad Tobt 2 rows of stator knives Infeed cross-section approx. 300 x 500 mm Drive motor: 30 kW

Stanje: rabljeno, Leto izdelave: 1995, Jaw width: 200 mm Weight: approx. 50 kg Space requirement approx.: 700 x 300 x 170 mm Fully hydraulic machine vice with 3-stage clamping range adjustment, in very good condition. The vice is equipped with an additional, laterally mounted hydraulic connection to support parallel clamping. Clamping range 1: 0 - 120 mm Redpfjcxxm Dsx Ad Tsbt Clamping range 2: 110 - 235 mm Clamping range 3: 225 - 350 mm Accessories: 1 clamping jaw with 200 mm jaw width and 65 mm jaw height 1 prism clamping jaw with 200 mm jaw width and 90 mm jaw height

Leto izdelave: 2021, Stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Rbodpeddmr Nsfx Ad Tjt Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.

Stanje: rabljeno, Druck: 160 t Rbedpfx Adjc Nt Ako Tjt Hub: 20–140 mm Hubweg: 50 mm Obere Tischgröße: 600 x 330 mm Untere Tischgröße: 1.000 x 700 mm Leistung: 15 kW Gewicht: 10.000 kg

Stanje: rabljeno, Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, Eccentric press, 5-ton eccentric press, for sale in excellent condition Rbsdouf Av Uopfx Ad Tet Pressing force: 5 tons Table size: 260x210 mm Stroke length: 130 mm 3 kW, 400 V 50 Hz

Stanje: rabljeno, številka stroja/vozila: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 500 x 490 mm Rbedpfx Aok Tuxljd Tst Drive motor: 22 kW

Stanje: novo, Wir möchten Ihnen Wellen anbieten, die für mittelgroße Schredder mit Seitenkämmen, Brechstange und Kassette ausgelegt sind. LINDNER U75, ARJES VZ750, HAMMEL VB750 / NOVA 75DK: - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 Rbodpfx Asx Hhwdod Tst MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA ist ein Unternehmen mit 21-jähriger Geschichte und von Beginn an in der Herstellung von Ersatzteilen sowie kompletten Recyclinglinien tätig. In den letzten Jahren haben wir unser Portfolio um die Fertigung von Zerkleinerungswellen für langsam laufende Schredder erweitert. Durch den Einsatz automatisierter Schweißprozesse und eigener Fertigungstechnologien konnten wir die Produktionszeiten minimieren und gleichzeitig durchgängig hohe Qualität sichern. Die Zerkleinerungswellen sind Serienprodukte, die unter anderem eine OEM-Zusammenarbeit mit Maschinenherstellern ermöglichen. Was unterscheidet PROTECHNIKA von der Konkurrenz? Ganz einfach: - Zertifizierte 3.1 Materialien - TUV SÜD Rheinland Qualität - ISO 9001 - Automatisierter Schweißprozess / ISO 15613 / ISO 15614 - Schweißerqualifizierungen nach ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Eigenes Konstruktionsbüro, das sämtliche Kundenanforderungen erfüllen kann - Eigene FORSCHUNGS- UND ENTWICKLUNGSABTEILUNG Die Beziehung zu unseren Kunden steht für uns an erster Stelle, denn deren Zufriedenheit ist unser Erfolg!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, moč: 5,5 kW (7,48 KM), Pressing force: 40 tons Table size: 630x380 mm Rsdpfxjlkfzzo Ad Tsbt Stroke length: 270 mm Pedal operation. Flywheel diameter: 800 mm

Stanje: rabljeno, Vibratory Finishing Machine Pre-filter Unit, Filtration System, Pre-filter Tank, Water Filter for Rotary Vibrator, Vibratory Finishing Machine, Vibratory Finishing System, Rotary Vibrator, Trowalizing System, Continuous Trough Vibrator - Pre-filter unit: suitable for vibratory finishing machines or other applications - Transport frame: mobile, equipped with 2 filter cartridges - Collection tank: capacity approx. 350 liters Rbsdpfx Aeigamuod Tst - Overall dimensions: 1400/620/H920 mm - Weight: 106 kg