Transportni trak

Unbekannt Förderband

Stanje: rabljeno, Leto izdelave: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Year of Manufacture: 2018 Sludge Throughput: approx. 0-40 m³/h Solids Capacity: max. 1.2 t DS/h Equipment: Front double door, side entrance door, fan heater, lighting, power sockets, etc. Rotor: max. speed 3650 min⁻¹ Drum Diameter: 470 mm System: Containerised plant with swap body system for acceptance of subsequent plant components. Ready for operation, fully piped and wired as a functional unit. Container Design: Frame construction, clad with sandwich panels, equipped for transport with swap chassis systems. Accessories: FHM PolyMix 4000SP preparation station, measuring equipment, control system Feed Pump: Seepex BN 52-6LS Discharge Conveyor: Double trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400V Current Draw: 142 A Max. Power Consumption: 70 kW Fuse Protection: 250 A Frequency: 50 Hz Dodpfxju R Icmo Afleul Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further information: see photos

Stanje: pripravljen za uporabo (rabljen), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W–0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Dedpfx Aow D Eubjfleul

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Duodpeihpn Nefx Aflel Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Dujdpfx Afoiuznuslel Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Djdpfxjr Iig Do Afleul Available from September 2024.

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. Duodpfx Afotuyr Ielel 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Duedpfx Ajg Ezarsfljl Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Duodpfxsrigxys Aflel Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: Dujdpfok Talpsx Aflol - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: novo,