Krma s štirimi hrbti

unbekannt Durchmesser 250 mm

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Recess: Ø 194 mm - Bolt circle: 3 x 214 mm - Bore: Ø 70 mm - Weight: 17 kg Hfedpfx Aoduab Nsb Ejd

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 145 K, Offer 24018 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling diameter in steel ST 60: 32 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 150 mm - 9 spindle speeds: 104 – 1400 rpm - 2 feeds: 0.1 / 0.2 mm/rev - Throat depth: 290 mm - Maximum distance table to spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm Hedpsu At Thefx Ab Eefd - Height adjustable via rack and hand crank - Drive: 400 V / 1.1 / 1.3 kW - Space requirements approx.: W 600 x H 2100 x D 900 mm - Weight approx.: 420 kg - Includes: - Forward/Reverse operation - Coolant system - Keyless drill chuck 1–13 mm - Work light

Stanje: dober (rabljeno), Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Jaws: hard, reversible jaws - Bayonet short-taper flange: Taper size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm - Bore: Ø 70 mm - Weight: 28 kg Hodpfxsduacne Ab Ejfd

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Short taper mount: Ø 105 mm Hfodpfx Abedrwl Ij Eod - Bore: Ø 76 mm - Weight: 26 kg

Stanje: rabljeno, Leto izdelave: 1962, Frequency 50 Hz Operating voltage 380 V Control voltage 220 V Connected load 2.6 kVA Rated current 6.1 A Hodpfsrxg S Tox Ab Eofd Machine weight approx. 1 t

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Bore: N/A Hededz U Suepfx Ab Eofd - Weight: 25 kg

Stanje: dober (rabljeno), Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Recess: Ø 200 mm - Bolt circle: 3 x 226 mm - Bore: Ø 76 mm Hodpfxjduacys Ab Eofd - Weight: 25 kg

Stanje: rabljeno, Column Drilling Machine Make: IBARMIA Model: A-35 Year of Manufacture: 1980 – workshop tested Machine No.: 1294-C Spindle speed: see technical data Accessories: - Automatic feed - Machine lamp - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gearbox steps 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation Hfsdpfx Aow Hxbmjb Eed 4 automatic feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Tapping capacity in steel (ST 60): M 27 Tapping capacity in cast iron (GG 20): M 33 Spindle taper: MK 4 Spindle travel: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Table can be rotated Weight approx. 490 kg Used, sold as seen, without guarantee

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck Hjdpfx Asd Ira Neb Eofd - Chuck size: Ø 250 mm - Bore: Ø 82 mm - Short taper: 8 - Weight: 24.2 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Bore: Ø 80 mm Hedpfx Asd Ira Uob Eefd - Short taper: 6 - Note: no additional jaws included - Weight: 26.1 kg

Stanje: dober (rabljeno), Offer 24132 + 24133 Technical Specifications (approx.): - 2 pieces of T-slot plates, total dimensions approx. 4970 x 3880 mm Hfodpfotiybxox Ab Esd - Clamping plate length (each): approx. 4970 mm - Clamping plate width (each): approx. 1940 mm - Top plate thickness: approx. 90 mm - Plate thickness with ribbing: 200 mm - Each with 4 longitudinal T-slots, length 4970 mm - Distance from outside edge to center of T-slot: 110 mm - Distance between T-slots: 550 mm - T-slots for T-nuts M24 - Side drillings for connecting both plates together - Weight per plate: approx. 6,000 kg - Total weight: approx. 12 t

Stanje: dober (rabljeno), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Chuck size: Ø 250 mm -Taper: Ø 94 mm -Thread: M20 -Pitch: 2.5 mm Hfsdpfjd Itcnsx Ab Ejd -Weight: 33.3 kg

Stanje: rabljeno, Flange mount, drive flange - Chuck flange with: drive pins - Outer diameter: 250 mm Hedod Hcq Repfx Ab Esfd - Short taper mount for: bayonet chuck mounting DIN 55027 - Taper size: 8 - Pitch circle diameter: Ø 171.4 mm - Weight: 17 kg

Stanje: pripravljen za uporabo (rabljen), CNC stružnica Mori Seiki CL-15, letnik 1994 Hfedpfx Abjx I D Sgs Eod

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck Hfodpfodt T I Dox Ab Eed - Chuck size: Ø 250 mm - Adapter plate with threaded mount: Ø 67 mm - Bore: Ø 51 mm - Weight: 27 kg