Bezel

unbekannt Durchmesser 102 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders Dedpfxex Nkp Ue Aplocg • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Leto izdelave: 1983, stanje: pripravljen za uporabo (rabljen), Was used for reworking profile rolls for a hot rolling mill, was regularly maintained, includes accessories, without spare parts, on-site inspection is possible, no videos available. Djdpfxoriwfio Aplscg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Proizvajalec: MAZAK Tip: INTEGREX 300-4ST Leto izdelave: 2008 Krmiljenje: Mazatrol Matrix Teža stroja ca.: 13.900 kg Vpenjanje orodja: Capto C6 Dcjdpfx Apjyh I Tdeljg X-hod: 530 mm Y-hod: 200 mm Z-hod: 1.065 mm Območje vrtljajev: 4.000 min⁻¹ Premer struženja: 300 mm Dolžina struženja: 1.000 mm Prostorske zahteve ca.: 6.500 × 3.000 × 3.200 mm Revolver za orodje – pozicije: 80 mest.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2015 Machine No. 610398 - Clamping surface of milling table: 800 x 425 mm - Number of T-slots: 6 - T-slot width: 14 H7 - T-slot spacing: 63 mm - Max. load: 300 kg - Spindle speed range: 1–4500 rpm - Stepless feed rate: 0–2000 mm/min - Rapid traverse, X and Y axes: 5000 mm/min - Z axis: 4000 mm/min - Travel distances X/Y/Z: 600/400/400 mm - Vertical and horizontal quill – SK40 Dedpfxewz Eu Nj Aplscg - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (LxWxH): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Output at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control system. The TNC 128 features numerous dialog-guided cycles with graphic simulation for fast and easy data input, e.g. various drilling cycles, thread cutting, bolt circles, linear drilling patterns, rectangular pockets, rectangular studs, and surface milling. This universal milling machine is in nearly new condition. The control is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to inspect and test the Kunzmann on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Oprema: transportni trak za ostružke, Možnosti: Transporter za ostružke Magazin za 48 orodij Visokotlačno hlajenje Detektor preobremenitve Odstranljiva ročica Lovilec oljne megle Paket za 5-osno obdelavo SMOOTHX Dcjdpfx Asywttrspleg 6 dodatnih M kod Paket zmogljivosti Gravirna funkcija Razširitev spomina za 8 MB

Stanje: pripravljen za uporabo (rabljen), Na voljo je ploščinska brusilnica ELB-Schliff s prikazovalnikom položaja. Dimenzije magnetne plošče X/Y: 900mm/450mm, brusilna dolžina: 900mm, brusilna širina: 450mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dcodpeya Hw Iofx Aplsg

Leto izdelave: 1988, stanje: pripravljen za uporabo (rabljen), Travels X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10,000 rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11,000kg. Djdotpp H Nopfx Aplocg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je CNC vertikalni stroj za obdelavo dolgih postelj Mazak. Hodi X/Y/Z: 3000mm/800mm/720mm, B-os: 110°, C-os: 360°, premer mize: 600mm, dimenzije dolge postelje X/Y: 3500mm/820mm, največja obremenitev mize: 2500kg, vreteno: BT40, hitrost: 18000vrt/min, hitri pomik: 50m/min, orodni mesta: 48, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: pribl. 5250mm/3650mm/3200mm, masa: pribl. 16100kg, krmiljenje: Mazatrol Matrix 2, delovne ure vretena: 18502h. Vključuje vrtljivo mizo Nikken CNC 601MA, visokotlačno hlajenje, sredinsko pregradno steno, merilno sondo Renishaw in RMP 60Q, CAD/CAM programsko opremo Topsolid 7.18 ter postprocesor. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dcedpfx Aox Ih Dmsplsg

Stanje: novo, 1 brand new semi-automatic high-performance horizontal bandsaw with double-column guidance and 2° cutting inclination towards the table support surface Brand: HUVEMA - BEKA MAK Model: BMSY 560 C Technical Specifications: Cutting capacity 90° rectangular: 560 x 750 mm Cutting capacity 90° round: 560 mm Djdpfxsbw H T Do Apljcg Cutting capacity 90° square: 560 mm Cutting capacity 45° rectangular: 410 x 560 mm Cutting capacity 45° round: 560 mm Cutting capacity 45° square: 560 mm Blade dimensions: 6000 x 41 x 1.3 mm Blade speed, stepless: 20-100 m/min Motor power: 4 kW Machine dimensions (L x W x H): 3400 x 1000 x 2050 mm Machine weight: 2045 kg Accessories / Special Features: • Semi-automatic double-column bandsaw • Linear guides • 2° cutting angle towards the table support • Infinitely variable cutting speed via potentiometer on the control panel • Hydraulic vise • Hydraulically/mechanically tensioned saw blade • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • 1200 mm infeed roller conveyor • Chip brush • 1 pc. bi-metal saw blade • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.300 obr/min, moč vretenovega motorja: 30.000 W, skupna masa: 9.100 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol Matrix, število osi: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It is equipped with a Mazatrol Matrix control unit, offering a maximum swing over bed of Ø 830 mm and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine comes fitted with a chip conveyor and a tool presetter. If you are looking for high-quality turning capabilities, you should consider the Mazak QT Nexus 350 II M we have for sale. Contact us for further information. Additional Equipment • Chip conveyor • Tool presetter • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Machine Advantages • Max. turning diameter: Ø 420 mm • Max. turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tooling motor power: 7.5 kW • Max. speed of driven tooling: 4000 rpm Dodpfxex D I Rio Aplscg Additional Information The machine is still under power