Vpenjalna plošča s T-rezom

unbekannt 630/630/H75 mm

Stanje: dober (rabljeno), Vpenjalna plošča z T-utorom, T-utorna plošča, stiskalna miza, vpenjalna plošča, ploščno polje, - T-utorna plošča: Vpenjalna plošča z T-utorom, za hidravlično ali ekscentrično stiskalnico... - Vpenjalna površina: 630 x 500 mm - Notranji premer: 180 mm - Višina plošče: 75 mm Fsdpfxexm R Ips Ahmsph - Širina utora: 19 mm - Mere: glej risbo na fotografijah - Skupne dimenzije: 630/500/H75 mm - Teža: 162 kg

Stanje: novo, Leto izdelave: 2024, Number of tools: 36 pcs Dimensions (L x W x H): 0.72 x 0.56 x 0.95 m Fpodpfocdq H Hex Ahmeh Weight: 27 kg New mobile tool trolley for tool holders with 40 taper, or optionally with inserts for VDI 40 turning tools. Each of the six rows is removable. The trolley is delivered packaged and without tool holders. Colour deviations possible.

Stanje: rabljeno, Technical details: Fsdpfxeu Nfwle Ahmeph Pressure: 2.3 t Stroke: 280 mm Throat depth: 155 mm Maximum ram stroke - forward: 0.08 m/sec Installation height with bolster plate (ram/top): 355 mm Distance table/ram: max. 355 mm Bolster plate on table: 280 x 280 mm Through hole in table: Ø 100 mm Ram speed, forward: 0.08 m/s Ram speed, return: 0.32 m/s Ram pin hole: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Approx. machine weight: 0.5 t Approx. machine dimensions (LxWxH): 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test performed up to 2.3 t. Good condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Pressing force: 100 t Bending length: 4100 mm Frame width: 3700 mm Throat depth: 415 mm Maximum stroke: 215 mm Installation height: 410 mm Approach speed: 200 mm/sec Working speed: 10.0 mm/sec Return speed: 150 mm/sec Working height: 1080 mm Fedpfx Ahoxzuwkjmjph Table width: 100 mm Controller: CYBELEC Oil capacity: 160 litres Voltage: 400 V Drive power: 8.5 kW Weight: 10,200 kg Dimensions (L x W x H): 4800 x 1800 x 2600 mm In well-maintained condition (!!) - Tested condition - Machine video - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution display * Clear, operator-language menus * Tool and product library * Swiveling control mounted at front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge (X axis) * 2x manually adjustable backgauge fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety guard (safety door) - Side safety guards (safety doors) - Bending/forming tools * 1x set of segmented upper tools (ROLLERI TOP 175.26.R08) * 1x set of segmented single-V die (V 12 mm) - 2x movable two-hand operation consoles - 2x movable foot switches - Operator manual for control

Stanje: rabljeno, Single-column hydraulic press DUNKES Type HZT 2.5 Machine no.: H94-2558 Year of manufacture: 1994 Pressing force: 2.5 tons Throat depth: 180 mm Fpedpfx Ajh Uhqyjhmjh Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Maximum installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Power connection: 400 V, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and travel cut-off - Two-hand operation at the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual loading operations) - 32,047 logged operating hours - Electrical and hydraulic circuit diagrams included Required space (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), powered tool with collet chuck holder, make Benz, model 1114 DA 003 00 E6, 4.1 kg Fodpfx Ahsd Th Eusmsph

Stanje: novo, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of rack rows: 01 pc. Length per rack row: approx. 5,025 mm Number of bays per rack row: 02 pcs. at 2,400 mm each Number of levels incl. ground level: 04 pcs. Scope of delivery includes: 03x pallet racking frames, new Frame colour: Sendzimir galvanized Footplate colour: RAL 5010 gentian blue Frame type: P73 Frame profile: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, footplates The frames are delivered unassembled (bolted lattice design) 2,350 mm high 800 mm deep Note: The upright frames are delivered unassembled. If desired, we can pre-assemble the frames for you for an additional fee of €17.50 plus 19% VAT. 16x pallet racking beams, new Beam colour: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: stepped beam Connector: 5 HK (hooks) Clear span: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 08x chipboards, 2nd choice, used Thickness: 22 mm Fpodokti Sxjpfx Ahmeh Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly two-piece) 32x locking pins, new Design: completely galvanized For securing the beams against accidental lifting 12x wedge anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 06x shims, new Design: completely galvanized For leveling the upright frames when installed on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply. Please contact us for a quote, specifying the delivery destination and scope.

Stanje: rabljeno, Technical Details: Pressure: 2.5 t Reach/Throat Depth: 155 mm Maximum Ram Stroke: 280 mm Distance Table to Ram: 450 mm Clamping Plate on Table: 260 x 1000 mm Ram Advance Speed: 0.08 m/s Ram Return Speed: 0.32 m/s Fsdpeu Nfv Ujfx Ahmjph Ram Bore: Ø 20 x 45 mm Height Above Floor: 930 mm Total Power Requirement: 1.1 kW Machine Weight approx.: 500 kg Machine Dimensions (LxWxH) approx.: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Pressing force: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster/riser plate: 355 mm Distance table to ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Drop-through opening in table: Ø 100 mm Ram speed, forward: 0.1 m/s Ram speed, return: 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor level: 800 mm Total power requirement: 1.5 kW Approx. machine weight: 370 kg Machine dimensions (LxWxH): approx. 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded steel sheet). Operation via foot switch. The press has been retrofitted with: Fedpfx Aeu Nfvbehmoph - Reel holder for film with pneumatic feed and punching device - FIBRO punching device (plastic disc Ø 47.5 mm for punching) - Foot control

Stanje: novo, Leto izdelave: 2026, Table length 1000 mm Fjdoy S D Naspfx Ahmoph Table width 1000 mm Table height 200 mm Weight 300 kg Manufacturer: GERD WOLFF Technical details: • Length: 1000 mm • Width: 1000 mm • Height: 200 mm • Weight: 300 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and features • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Precision fine scaling • Reinforced with weld seams and ribs on the underside • Optimum working height: 820–865 mm • 4x height-adjustable leveling feet • Matching accessory set available (optional) Our welding tables are manufactured from cast iron grade HT 300 and subjected to a comprehensive nitriding process after machining. In addition, these tables feature precise fine scaling, engraved using laser technology. To ensure sufficient stability, our welding tables are reinforced underneath with weld seams and ribs. (See images) Moreover, each table undergoes a 3-day gas nitriding process, which increases the surface’s corrosion resistance as well as the table’s fatigue and vibration strength. All our tables are equipped with height-adjustable legs. The minimum adjustment range is 620 mm, and the maximum is 665 mm, allowing for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 The images do not depict original sizes and are for illustrative purposes only. Our welding tables are produced for our "GERD WOLLF Maschinenfabrik" distribution brand by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding table