T - slot tabele

unbekannt 2000X1000MM

Stanje: dober (rabljeno), Vpenjalna plošča, rizalna ali kontaktna plošča, merilna plošča, merilna miza, varilna miza, ravnalna plošča, risalna plošča, ravnalna miza - Vpenjalna plošča: na masivnem podnožju, z primežem - Vpenjalna površina: 2000 x 1000 mm - Višina mize: 870 mm - Debelina plošče: 120 mm - Primež: čeljusti: 100 x 30 mm, razpon 160 mm - Transportne mere: 2280/1000/H1020 mm - Teža: 1500 kg Godpfx Aexpfimsfqett

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox Gtjdpfx Afsfgyicsqot • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: dober (rabljeno), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer - Industrial trailer: with single-axle turntable steering - Platform: 2000 x 1000 mm, height 525 mm - Load capacity: 3,000 kg - Tyres: solid rubber - Trailer coupling: for industrial trailers Gjdpfehubc Eox Afqett - Dimensions: 3515/1000/H525 mm - Weight: 264 kg

Stanje: dober (rabljeno), Pritrdilna plošča, risalna plošča, tusirna plošča, merilna plošča, merilna miza, varilna miza, izravnalna plošča, risalna miza. - Pritrdilna plošča: na masivnem podstavku, z primežem Gtjdjxm Sagopfx Afqot - Pritrdilna površina: 2000 x 1000 mm - Višina mize: 925 mm - Debelina plošče: 115 mm - Primež: čeljusti: 150 x 30 mm, razpon 250 mm - Transportne dimenzije: 2480/1000/H1110 mm - Teža: 1850 kg

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Gtedpeuxfucofx Afqjt Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: dober (rabljeno), Vpenjalna plošča, risalna plošča, merilna plošča, merilna miza, kontrolna plošča, risalna plošča - Vpenjalna plošča: kontrolna plošča z nastavljivimi nogami - Dolžina: 2000 mm - Širina: 1000 mm - Višina: 285 mm - Debelina plošče: 35 mm - Nastavljive noge: 4 kosa 240/240/H590 mm - Transportne mere: 2000/1000/H525 mm Gjdpfx Afjxrywqsqstt - Teža: 960 kg

Stanje: dober (rabljeno), Vpenjalna plošča, risalna plošča, preskusna plošča, merilna miza, poravnalna plošča, označevalna plošča - Vpenjalna plošča: poravnalna plošča z nastavljivimi nogami - Dolžina: 2000 mm - Širina: 1000 mm - Višina: 285 mm - Debelina plošče: 30 mm - Nastavljive noge: 4 kosi 240/240/H590 mm Gtsdpfx Ajxryv Hefqot - Transportne dimenzije: 2000/1000/H525 mm - Teža: 960 kg

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Gtjdpsvadd Iefx Afqst Copying attachment

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Gtedpfx Afoga Tzxjqet Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 820 mm Gedpfjw Dvipex Afqstt Turning length: 2,000 mm Control: SIN 810 D Center height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed gearbox stage 1: 6.40 - 376 rpm Spindle speed gearbox stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose to DIN 55027 - size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MT 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirement approx.: 6.00 x 3.00 x H2.60 m Controls: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction system, 2 steady rests. Spindle bearing refurbished by the manufacturer in 04/2023. Machine can be inspected under power.