Hidravlična enota za vpenjala

unbekannt 11 kW

Stanje: dober (rabljeno), Leto izdelave: 1986, Hall extraction system, chip filter system, filtration unit, chip extraction, wood chip extraction, radial fan, chip extraction blower, fan, extraction, chip blower -unfortunately, no conveying data available -Motor: MEZ type 4AP80-2 Kwedpsfxx Nnjfx Abbot -Motor power: 1.1 kW -Speed: 2840 rpm -Inlet connection: Ø 60 mm -Outlet connection: Ø 400 mm -Base frame: on castors -Dimensions: 940/540/H1510 mm -Weight: 74 kg

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC Kwodpjd Ab H Hefx Abbjt • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Leto izdelave: 2009, Stanje: dober (rabljeno), Hidravlični cilinder, podporni cilinder, hidravlični bat, tlačni bat - Tlačna sila: pri 250 bar 96 t - Premer bata: 220 mm - Batnica: Ø 125 mm - Zunanji premer cevi cilindra: Ø 260 mm - Hod: 495 mm - Skupna dolžina v zaprtem položaju (sredina do sredine luknje): 1195 mm - Priključek batnice: Ø 100 mm - Priključek cilindra: Ø 100 mm - Univerzalna uporaba Kwodpfxsdq U S Ie Abbet - Količina: 15 cilindrov na zalogi - Cena: na kos - Dimenzije: 1360/530/H300 mm - Teža: 364 kg/kos

Stanje: dober (rabljeno), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Swiveling control panel with digital display Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons Kedpfjwkaaljx Abbewt The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Linija za proizvodnju užadi / Linija za premotavanje užadi REDAELLI linija za STABILIZIRANO BETONSKE ŽICE ZA PREDNAPINJANJE Linija za izradu 3-žičanih i 7-žičanih užadi koja se koriste za nosive grede velikih raspona, mostovske elemente, velike prednapregnute elemente poput podnih ploča, pilota, te za prednapete i postnapete konstrukcije. - Godina proizvodnje: 1979./2005. - Dimenzije bubnja: 800x900 mm - Raspon promjera užeta za proizvodnju: - 3/8 - 1/4 - 1/2 - 5/16 - 6/10-7/16 - 7/10-9/16 - Težina koluta: 4.000 kg - Radna brzina: 40-60 m/min - Žica od visokougljičnog čelika - Dimenzije PC užeta: 6,4 / 6,9 / 9,3 / 21,5 mm - Električno napajanje: 400 kW Kwsdpjt Iq Hbjfx Abbot Linija se sastoji od: - Stalka za odmatanje žice - Jedinice za tkanje - Peći - Sustava za hlađenje - Povlačnih valjaka - Jedinice za namatanje užeta

Stanje: novo, Lifting capacity: 5 t Workpiece diameter: 250 - 2500 mm Drum diameter: 250 x 100 mm Feed rate: 100 - 1000 mm/min Total power requirement: 0.75 kW Features • Self-aligning for various diameters • Electronic quality components by Schneider/Siemens/Delta • Continuously adjustable drive unit speed • Polyurethane-coated rollers Kjdpfx Abjfv A A Usbewt • Optimal load distribution (4 rollers/unit), especially gentle for workpieces with thin walls and sensitive surfaces • Remote control with cable and dual foot pedal • CE certificate • 3-year warranty (see warranty terms)

Leto izdelave: 1969, Stanje: zelo dobro (rabljeno), Naprodaj je upogibni stroj za cevi s trnom Schratze-Wirtz WE2W0DS. Stroj je v celoti delujoč in vključuje bogat nabor orodij. Schratze-Wirtz WE2W0DS Leto izdelave: 1969 Dolžina: 9600 mm Širina: 3500 mm Višina: 2000 mm Orodja za upogibanje cevi: fi 83 - R300 fi 88,9 - R300 Kwjdpfxopxkwle Abbjt fi 101,6 - R250, R400 fi 108 - R450 fi 114,3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, piston pump (axial piston pump) - Housing material: stainless steel - Drive power: 11 kW - Speed: 1750 rpm - Pump: Vickers PVB10 RSV31 CG20 - Flow rate: approx. 36 L/min - Pressure: 210 bar - Hydraulic valve Kwodpfx Aeb A Hcnebbjt - Filter - Hydraulic tank dimensions: 500/450/H370 mm - Overall dimensions: 520/330/H600 mm - Weight: 320 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, številka stroja/vozila: 240054, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Artech, model krmilnika: Computer, število valjev: 3, moč: 30 kW (40,79 KM), Oprema: nujno zaustavitev, Proizvodno podjetje prodaja profilno krivilni stroj v dobrem stanju z orodji. Kwsdpfx Aboxv Sbvebst

Stanje: rabljeno, Spreader and press device with hydraulic power unit WEBER type E45 / 59600.0 Kwodpodzp S Rofx Abbet High-pressure unit + hydraulic spreader tongs, hydraulic spreader Year of manufacture: 1988 / 1986 Hydraulic power unit type E45 / 59600.0 Max. operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device – tongs WEBER type SP30 / 059 198.0 Reach = arm length: 340 mm Max. spreading distance: 810 mm Spreading force in the working range: max. 132 kN Closing force: 99 kN - Twin hose with quick coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Hydraulic unit weight: approx. 40 kg Spreader weight: approx. 25 kg Very good condition Hydraulic rescue set for fire service with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by forcing openings apart. Can also be used for compressing or lifting loads. Versatile applications due to the multifunctional spreader jaws made of drop-forged and hardened steel.