Prednja plošča

unbekannt Ø 2300 mm

Stanje: dober (rabljeno), Flexible extraction arm for welding fume extractor, welding fume extraction -Welding fume extraction duct: flexible -Pipe diameter: Ø 325 mm -Total length: 2300 mm Lhodpjvck Hzefx Abbjb -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Surface grinding machine Brand: Jakobsen Model: 1432 Lsdpfsiv S Avox Abbshb Year: 1990 RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Heidenhain ND 221B digital readout. Selter electronic magnetic table 800x350 mm with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007. Includes sets of grinding wheels (see photographs).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 240 kN Vorschub - Feinverstellung 0,5-45 mm/min Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm Lsdpfxexukrqj Abbshb -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t Lhodpfx Abecxxtmjbsb with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Lsdpfxewudhue Abbohb Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: novo, Optimum OPTImill MZ 2S Tool Milling Machine Featuring a digital 3-axis position display DP 700 from NEWALL. The feed axes are controlled by an inverter drive via the control panel. Versatile range of applications Excellent damping properties and rigidity of the machine bed All guides are hardened and precision ground, adjustable via gib strips Automatic feed on X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screws on all axes Lhedpfefnh Sgex Abbob Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty, large-scale cross table with high-precision machined surface and 5 T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product) approx. 1239mm Width/Depth (product) approx. 1168mm Height (product) approx. 1900mm Net weight approx. 1400kg Drill-Milling Head Milling head swiveling range ±90° Drilling-Milling Performance Max. cutter head size 100mm Drilling capacity in steel (S235JR) 30mm Continuous drilling capacity in steel (S235JR) 26mm Max. end mill size 25mm Electrical Data Drive motor power 2.2kW Connection voltage 400V Mains frequency 50Hz Horizontal Milling Table Horizontal table length 750mm Horizontal table width 320mm Distance vertical spindle to horizontal table min. 75mm Distance vertical spindle to horizontal table max. 410mm Horizontal table T-slot size 14mm Horizontal table T-slot number 5 Horizontal table T-slot spacing 63mm Distance horizontal spindle to horizontal table min. 70mm Distance horizontal spindle to horizontal table max. 400mm Maximum horizontal table load 285kg Vertical Milling Table Vertical table length 830mm Vertical table width 250mm Vertical table T-slot size 14mm Vertical table T-slot number 2 Vertical table T-slot spacing 63mm Coolant System Coolant pump drive power 95W Travel Paths Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Automatic X-axis travel approx. 310mm Automatic Y-axis travel approx. 160mm Automatic Z-axis travel 295mm Vertical Spindle Vertical spindle overhang 100mm Vertical spindle taper ISO 40 DIN 2080 Vertical spindle speed range 50 – 1890 rpm Vertical spindle number of speed ranges 12 steps Vertical spindle drawbar M16 Vertical spindle quill travel 120mm Vertical spindle max. load 1100Nm Feed Rate Feed rate X-axis 10 – 600mm/min Feed rate Y-axis 10 – 600mm/min Feed rate Z-axis 10 – 600mm/min Electrical Connection Total connected load 4kW Motors Rapid traverse X-axis drive motor power 0.375kW Rapid traverse Y-axis drive motor power 0.375kW Rapid traverse Z-axis drive motor power 0.375kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 MT1 and MT2 sleeves Horizontal milling spindle Ø 27 mm Operating tools

Stanje: novo, High-performance thread tapping machine with leadscrew mechanism. Safety system to prevent tool breakage. Programs for single and continuous operation, programmable thread depth, piece counter, LED light, and electronically controlled motor braking for single-cycle mode. Easy leadscrew change via quick coupling. Normal drilling capacity: 15 mm Thread tapping capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat depth: 250 mm Spindle/table distance: 185 to 541 mm Table surface: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 Lhedpjfrlndsfx Abbob 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as a column drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column extended by 200 mm: 14154

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Pitch: 8 mm Roll spindle mount diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Lodpjvpaa Refx Abbshb Total power requirement: 7.5 kW Machine weight: approx. 3.1 t Space requirement: approx. 1.9 x 1.1 x 1.2 m

Leto izdelave: 1984, Stanje: rabljeno, max. Schleifscheibendurchmesser: 40 mm Ljdpfx Abocq Rv Uobehb min. Schleifscheibendurchmesser: 5 mm Gewicht: 0,9 t 2 Schleifscheiben mit Flansch 8 Spannzangen 1 Kühlmittelbehälter Mechanischer Vorschub mit Festanschlag Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, Offered for sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: Ljdpfxov Epigj Abbshb 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters