Stroj za upogibanje s plansko ploščo

unbekannt Ø 1330 mm

Stanje: novo, Cutting diameter round: 900 mm Kdjdpofg E Hpsfx Af Tjg Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Ksdskvnumopfx Af Tjdg Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Kdjdpfx Asfg E Hlsf Tjg Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Kdodpfxefw Ah Re Af Tsg Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Kodpfx Aovr S Uljf Tedg Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: rabljeno, Tischgröße unten: 1120 x 1250 mm Technische Merkmale: Kdsdpfj Dv Nxex Af Tsg * Hub auf/ab: 1000 mm * Hub vor/zurück: 1200 mm * Hub links/rechts: 1000 mm

Leto izdelave: 1979, Stanje: dober (rabljeno), 3-jaw chuck Multifix quick-change toolpost Tailstock Technical specifications: Turning length: 1000 mm Swing over bed: 520 mm Kdsdpfxsnqy Has Af Teg Swing over cross slide: 300 mm Spindle speed range: 30–1600 rpm Machine weight approx.: 2500 kg Technical data, accessories, and machine description are not binding.

Stanje: novo, Leto izdelave: 2025, Die Metall-Lamellenzaun-Profiliermaschine MFP-1 wurde von unserem Unternehmen entwickelt, um halbrunde Metall-Lamellenzaunprofile herzustellen. Dieses Profil ist weit verbreitet und bei Unternehmen, die sich mit Herstellung, Montage und Vertrieb von Metallzäunen beschäftigen, sehr beliebt. Die Profilproduktion erfolgt schrittweise: Zunächst werden an den Kanten des Flachmetalls Bördelungen geformt, anschließend entstehen die Profilhöhe und die halbrunde Form. Im letzten Umformstadium wird eine Mittelrippe im Profil ausgearbeitet. Diese Anzahl an Umformschritten gewährleistet einen sanften Blechwechsel während des Walzens sowie eine hohe Qualität des Endprodukts. Als Ausgangsmaterial kann ein entsprechend breiter und langer Blechstreifen verwendet werden, der zuvor auf einer anderen Maschine vorgeschnitten wird – etwa auf einer Blechschlitzanlage oder einer Tafelschere. Nach dem Profilieren kann das Zaunlattenende mit einer speziell von uns gefertigten Stanzpresse optisch aufgewertet werden. Die Werkzeuge dieser Presse verfügen über eine spezielle Rundgeometrie und sind exakt auf die halbrunde Zaunlattenform abgestimmt, um einen optimalen Schnitt zu erzielen. Die Werkzeuge bestehen aus Spezial-Werkzeugstahl und werden gehärtet, um den hohen Anforderungen an die Schnittwerkzeuge gerecht zu werden. Unser Unternehmen bietet sowohl halbautomatische Profiliermaschinen zur Herstellung von Metallzaunlatten als auch manuelle Stanzpressen sowie vollautomatische Fertigungslinien an. Eine solche automatische Metallzaun-Fertigungslinie kann mit folgenden Komponenten ausgestattet sein: Konsolen-Abwickler, Profiliermaschine mit Automatisierungssystem und Programmierung der Stückzahl und Längen, automatische elektrische Ablängschere und eine Stapelvorrichtung. Kedpfxem Twnlo Af Tsdg Gemeinsam mit uns finden unsere Kunden die optimale Lösung für ihren Fertigungsprozess entsprechend Produktionsvolumen, Budget usw. Für weitere Informationen zur Metall-Lamellenzaun-Profiliermaschine MFP-1 wenden Sie sich bitte an unseren Vertrieb.

Stanje: rabljeno, Leto izdelave: 2009, Spindle head diameter: 75 mm Taper in spindle: Morse 5 Spindle stroke: 350 mm Min./max. outreach from casing surface to spindle axis: 1170/2070 mm Min./max. radius at extreme spindle positions: 1370/2270 mm Min./max. distance of spindle head in vertical position (with retracted spindle) from floor: 305/1555 mm Min./max. distance of spindle axis in horizontal position from floor: 295/2725 mm Vertical arm adjustment (stroke): 1250 mm Kdedpfxovwbcco Af Tjg Horizontal arm adjustment (travel): 900 mm Arm rotation: 360° Spindle head rotation: 360° Spindle head tilt from horizontal position up/down: 90° / 90° Carriage travel on bed (extended): 2500 mm Column diameter: 400 mm

Stanje: novo, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, angle adjustable. Includes 5 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, reversible main rotation, thread selection. Ksdpjfg U Snjfx Af Tsdg Optional: - Clamping table with T-slots: 990x700x800mm. - Magnetic base.