Vpenjalna plošča - Jeklena plošča - Polje plošče

UNBEKANNT / UNKNOWN AP 2500x1250x100 (Nr.1-2)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 1.000 mm, dolžina mize: 4.150 mm, obremenitev mize: 4.000 kg, 3-Axis Machining Centre Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Rjdpfewycmmsx Ag Tjp Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Redsph Uk Nepfx Ag Tjp Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Rjdpfx Agowxz D Uo Tsp Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Leto izdelave: 2009, Stanje: rabljeno, Technical details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400 V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions (L x W x H): 0.7 x 0.65 x 1.7 m Induction shrink fit machine with water cooling (30-liter tank, integrated in housing) Application: For ultra-fast tool changes via targeted inductive heating Cooling medium: Emulsion Suitable for Ø 3–50 mm carbide (HM) and Ø 6–50 mm HSS tools Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Rsdpswp I S Hofx Ag Tep Operation via control panel

Leto izdelave: 2023, Stanje: novo, SONDA ist eine kostengünstige Lösung zur Nachrüstung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit verwandeln möchten, ist die SONDA die ideale Wahl. Wir fertigen SONDA-Eintaucheinheiten unabhängig von den Abmessungen Ihres Tanks. Sie müssen uns lediglich die Maße Ihres Tanks mitteilen und das Gerät mit wenigen Handgriffen montieren. Funktionsprinzip -Jede einzelne, tauchfähige SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. -Die tauchfähigen SONDA-Module sind montagefertig für die Tankwand vorbereitet. -Ideal geeignet zur Nachrüstung großer Behälter, z.B. für Beschichtungs- und Oberflächenbehandlungsprozesse. Tauchschwinger, Ultraschallreiniger, Wandler, Ultraschall Rsdpfx Ajd I E Ivog Top Gerne senden wir Ihnen auf Anfrage die technischen Spezifikationen zu.

Stanje: rabljeno, Premer vrtenja nad posteljo 280 mm Premer vrtenja nad suportom 160 mm Dolžina struženja 500 mm Višina konic 140 mm Razmak med konicami 500 mm Premer vretena 36 mm Hitrosti vretena 15 - 3550 vrt/min Glava vretena DIN 55022 Gr. 5 Pomiki – vzdolžno 0,008 - 0,560 mm/obr Pomiki – prečno 0,004 - 0,280 mm/obr Navoj – mm korak 0,2 - 12 mm Premer vodilnega vretena 24 mm Korak vodilnega vretena 6 mm Konica pinole MK 3 Hod pinole konjička 90 mm Redpfx Aox Ni Dkjg Tep Prečni pomik konjička iz sredine 15 mm Skupna potrebna moč 2,2 kW Teža stroja pribl. 0,6 t - Stroj iz učne delavnice - Pribor: digitalno merjenje na 3 oseh, 3-čeljustna glava RÖHM 160 mmø, MULTIFIX glava Gr. A M-št. 4684

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Os X 5.000 mm Os Y 3.000 mm Os Z 1.500 mm Velikost mize 5.000 x 2.500 mm Vpenjalo orodja HSK 63 Menjalec orodja 60 pozicij Rjdpfex E S E Nex Ag Tjp Krmiljenje HEIDENHAIN TNC 640 Vključno z notranjim hlajenjem (IKZ) 40 bar Vključno s simultano vilicasto glavo Vključno s popolno dokumentacijo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, A DMG Mori CNC vertical machining center including Lang pallet handling system is available. 1) DMG Mori, year of manufacture: 2014, travel ranges X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, spindle speed: 14,000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool stations: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28,250h, spindle hours: 13,116h. 2) Lang Eco Compact 20 pallet automation system, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable at the doors is defective. Documentation is available. On-site inspection is possible. Rsdpswpk Anjfx Ag Tjp

Stanje: novo, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machinery category, distinguished by its robust construction and long, supportive guideways. Its heavy-duty machine base made from high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate precise infeed adjustments. This equipment is complemented by a standard position display with linear scales, enabling easy monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. Buyers receive extensive standard accessories, including an internal grinding device and a work lamp. Experience outstanding performance and precision with the RSM 500 A – contact us now to optimize your grinding projects! Rsdpfencdx Nox Ag Tsp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 37.684 h, največja hitrost vretena: 18.000 obr/min, skupna masa: 30.000 kg, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 900 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, število osi: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travel ranges of approximately 1,200 mm in X, 1,300 mm in Y, and 900 mm in Z. The machine is equipped with an NC rotary tilting table with a diameter of 1,350 mm and a spindle speed of 18,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HERMLE C60U Dynamic universal machining center we are offering for sale. Contact us for further details. Rjdpfoylzc Nsx Ag Top • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Rated current: 113 A • Power consumption: 78 kVA • Circuit diagram No.: 1-325-MS-96-021 • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC rotary tilting table • Table diameter: Ø 1,350 mm • Table size: 1,350 × 1,100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) • Operating hours: 37,684 h • Spindle replaced approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools, and zero-point clamping systems shown in the pictures are not included in the scope of delivery Additional equipment • Coolant through the spindle, 80 bar (high pressure) • Air blast device • Air through spindle center • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM