Tračna žaga

TTMC BS-460G

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Bodpfx Aefxyhfjg Tecw Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 850 mm, pomik po osi Z: 750 mm, število mest v zalogovniku orodij: 36, dolžina mize: 2.200 mm, širina mize: 850 mm, model krmilnika: OKUMA-OSP-HMI, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 950 mm, moč vretenovega motorja: 22 W, število vreten: 36, hitri pomik na osi Z: 16 m/min, hitro pomikanje X-os: 16 m/min, hitri pomik os Y: 16 m/min, nos vretena: BT 50, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 50 obr/min, obremenitev mize: 2.500 kg, premer orodja: 120 mm, dolžina orodja: 400 mm, teža orodja: 20 g, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 3-axis vertical machining centre with OKUMA OSP-HMI CNC Bodpfx Aou Dinkog Tocw

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Bjdpfjnzpx Rjx Ag Tocw -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg Bcodpfsu A Dn Njx Ag Tow U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: zelo dobro (rabljeno), Knuth UFM 2 univerzalna rezkalna naprava Tehnične specifikacije Potovalna razdalja X-os (ročno) 800 mm Potovalna razdalja X-os 750 mm Potovalna razdalja Y-os 300 mm Potovalna razdalja Z-os 400 mm Velikost mize 1320x320 mm T-utori 5x14x63 mm Podajalne hitrosti Podajalna razdalja Y-os (8) 20 - 360 mm/min Podajalna razdalja Z-os 600 mm/min Hitrost vretena (12) 58 - 1800 min-1 Stožec navpičnega vretena SK 40 Razdalja med konico vretena in mizo 0 - 400 mm Zasuk glave 45° Stožec vodoravnega vretena SK 50 Pogon Glavna moč motorja 4 kW Moč motorja na osi Z 0,75 kW Moč napajalnega motorja 0,55 kW Moč motorja hladilne črpalke 0,09 kW Zmogljivost hladilne črpalke 25 l/min Dimenzije in teža Dimenzije 1900x1720x1750 mm Teža 2100 kg Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Bcsdpfx Agenfu Rie Tsw Druge nove in rabljene artikle najdete v naši spletni trgovini! Mednarodni stroški poštnine na zahtevo!

Stanje: novo, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards Bcodpoir Igwjfx Ag Tsw - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Stanje: rabljeno, Paleta s T-utoroma, primerna za DMG DMC 100 H in DMG DMC 100 U. Na voljo je še več palet. Bedpsqx Uh Nsfx Ag Tecw

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup Bedpjmmfwuofx Ag Tecw AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: zelo dobro (rabljeno), Henri Hauser M5 DR koordinatni vrtalni stroj Bcedog Ibuxspfx Ag Tow Premer vretena: 90 mm X-pomik: 700 mm Y-pomik: 500 mm Zmogljivost vrtanja v jeklu: 40 mm Vpenjanje vretena MK: 4 Hod vrtalne vretene: 170 mm Število vrtljajev vretena: 2 Brezstopenjsko: 10-2000 obr/min Maksimalen premer izvlake: 230 mm Mere mize - vzdolžno: 900 mm Mere mize - prečno: 770 mm Vertikalni hod prečne grede: 630 mm Vrtalnih vreten: 6 kos Od/do: 0,02-0,20 obr/min Prehod med stojali: 900 mm Prehod med vretenom in mizo: 815 mm Motor vretena: 4,0 KM Skupna priključna moč: 380 V Teža stroja cca: 3,9 t Popolna zaprtje tovarne, velika izbira skladiščnih podestov, paletnih regalov, policnih regalov, karuselnih regalov. Kakovostni industrijski stroji, stružnice, brusilni stroji, ročna orodja. Možnost financiranja preko naše banke. komplett-konzept.leasingo.de Več novih in rabljenih artiklov najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: novo, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot size ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Table longitudinal travel ----- 560 mm Table cross travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Ph INCLUDES * Drill chuck with shank ISO30 - B16 * Forward/Reverse switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice Bcsdpfsga T Anjx Ag Tjw * ISO30 tool holder + 12 collets in case * Milling cutter set