TRUMPF TRUPUNCH 3000 (S11)

TRUMPF TRUPUNCH 3000 (S11)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, prebijalna sila: 18 t, skupna višina: 2.252 mm, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, proizvajalec krmilnikov: BOSCH, model krmilnika: MTX CMP70, največja dolžina izdelka: 6.500 mm, This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It is equipped with a Bosch MTX CMP70 control system, offering X/Y axis travel of 2500 / 1250 mm and can handle sheet metal weights up to 160 kg. The machine features a linear tool magazine with 18 stations and is equipped with functions such as MultiTool, MultiBend, and thread forming. Take this opportunity to purchase this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for further information about this machine. • Maximum sheet weight: 160 kg • Performance: • Punching strokes (E = 1 mm): 1000 strokes/min • Marking strokes: 2500 strokes/min • MultiTool tool change time: 0.3 s Ijdpfjx D Dklsx Al Notf • Power consumption: • Standby with auto shut-off: 0.3 kW (average) • During production: 5.6 kW (average) • Features & equipment: • MultiTool functionality • MultiBend functionality • Thread forming functionality with tool breakage monitoring • Surface marking/embossing functionality • Deburring and roller technology • Tool magazine: Linear, 18 stations • Documentation: TruPunch 3000 documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 18 t, delovno območje: 30.001.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.600 mm, Zelo dobro vzdrževana in popolnoma servisirana rabljena CNC izsekovalna stiskalnica večjega formata Trumpf 3000 naprodaj Ijdpjxrnggefx Al Netf Proizvajalec: TRUMPF Tip: TruPunch 3000 (S11) Letnik: 11/2012 Delovno območje: 3000 x 1500 mm - brez ponovnega pozicioniranja Delovni razpon na prečni osi (X): 3000 mm Delovni razpon vzdolž (Y osi): 1600 mm Velik vrat: 1600 mm V celoti z večorodno orodjarsko zmogljivostjo Tip S11 Video na voljo na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, CNC Punching Machine with only approx. 11,600 operating hours, available immediately Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of Manufacture: 11/2013 Operating Hours approx.: only 11,600 h Sheet Size: Large Format TECHNICAL DATA: Working Area: 3,000 x 1,500 mm, with repositioning Itedpfx Asxn Tywjl Njf Max. Workpiece Weight: 160 kg Punching and Hold-Down Force: 180 kN and 20 kN Max. Stroke Rate: Punching: 800 strokes/min, Marking: 2,500 strokes/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / High-speed Embossing function - Deburring and Rolling Technology - Adaptive Stroke Calibration - Punch slug breakage detection - Lowering die - Spray degreasing for dies with fill level monitoring - Additional clamping jaw - Sheet collision detection - Positioning pin, outer side, left outside position STANDARD EQUIPMENT: Machine: - Working area 3000 x 1500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear tool magazine with 17 tool stations and 3 clamps - Maintenance-free 3-phase servo motors - Repositioning unit with programmable hold-down - Ball tables - Part chute - Programmable support table - Good parts container - Chip container - Automatic shut-off mechanism - Transport and assembly fixtures - Positioning pin (right side, inner position) - Foot switch for closing the clamps Punch Head: - Servo-electric punch head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punches - Punch slug extraction - Forming - Manually adjustable press force - Stroke counter for punches - Monitoring of fill level for thread forming and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operator panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced shop floor programming - Data transfer - USB interface Safety: CE marking (factory supplied) Dual-beam light barriers

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, obratovalne ure: 35.418 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 18 t, najv. debelina pločevine: 6 mm, dolžina podajanja os X: 2.500 mm, dolžina pomika po osi Y: 1.250 mm, HIGHLIGHTS - Last maintenance in February - Punching head: stripper holder and seals replaced - Lower clamping piston replaced - C1K encoder and needle bearing replaced - All wear parts and maintenance points serviced TECHNICAL DETAILS Max. punching force: 180 kN Working area: 2,500 x 1,250 mm Max. sheet thickness: 6.4 mm Control: Bosch MTX CMP70 Tool system: 18 tool stations, with 2 clamps Part chute: 500 x 500 mm Hydraulic single tool holder: 360° rotation Programmable hold-down: active / passive / retraction MACHINE DETAILS Operating hours: 35,418 h (as of 28/02/2025) Space requirements: 6,500 x 6,000 x 2,230 mm Machine weight: 9,800 kg Connected load: 18 kVA EQUIPMENT - Stable, easily accessible C-frame - Linear magazine for tool stations - Footswitch for closing clamps - Servo-electric punching head - Spray lubrication for punch - Punch slug extraction - Adjustable hold-down force - 17" touch screen - Teleservice via internet - Automatic shut-off - USB interface - CE marking - Multi-beam light barriers - Hydraulic quick shut-off Itjdpfx Aljwu Evyj Nsf - Multitool function - Deburring and roll forming function - Thread forming function - Engraving tools function - Marking / fast beading function - Part chute sensor - Vibration-damped installation

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Itjdjt Hw Iijpfx Al Njf Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 5.899 h, A géphez tartozó egyéb gépek és szerszámok: - Géphez tartozó szerszámok (listát tudunk küldeni) - Quick Sharp - Multiset ITM ALAPGÉP: TruPunch 3000 nagyméretű (S11) Gép:  C-keret  Koordináta vezetés  Lineáris tár 24 pozícióval befogók és szerszámok számára  Hidraulikus befogók (3 db)  Karbantartásmentes 3-fázisú szervomotoros hajtás  Újrapozícionáló egység programozható letolóval  Befogók zárására lábkapcsoló  Alkatrészkivevő csapóajtó  Szállítási és szerelési szerelvény Lyukasztófej:  Szervo elektromos lyukasztófej  Forgatható egyes szerszámtartó adapter  Kézzel állítható leszorító erő  Programozható leszorító pozíció  Szerszámhossz kompenzáció  Lyukasztókhoz spray kenés  Vákuumos hulladékeltávolítás  Formázás  Ütésszám  Szerszámkenés szintfigyelés Vezérlés:  TRUMPF vezérlés Bosch Rexroth IndraMotion MTX alapon  Vezérlőpanel 17" TFT kijelzővel  Integrált technológiai adatok  Internetes távdiagnosztikai csatlakozás (Teleservice)  Automatikus lekapcsoló funkció  NC programkezelés  Gyártási terv Adatátvitel:  USB port és hálózati csatlakozás  RJ45 hálózati csatlakozó Biztonság:  CE minősítés  Többsugaras fénysorompó  Gyors meghajtó-leállítás Bővített alapfelszereltség:  1. indexcsap jobb oldali belső pozíció  Gördülőgolyós asztalok  Kész alkatrészgyűjtő  Hulladéktartály PRÉMIUM CSOMAGOK: 2. Produktivitási csomag  MultiTool funkció  Alkatrészcsúszda szenzor  Szintfigyelős spray kenő állomás 3. Lyukasztási minőség csomag  MultiShear funkció  Sorjátlanító és görgős technológia  Adaptív ütés kalibrálás 4. Formázó csomag  Menetfúró funkció törésfelügyelettel Itjdpfxewm Shaj Al Njf  Jelölés / gyors bordázás funkció  MultiBend funkció  Magasságban állítható befogók 5. Gravírozás funkció 6. Smart Punch Monitoring 7. Vezeték nélküli kezelőpont 8. MobileControl App 9. 21 db RTC patron + SZERSZÁMOK!

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Visoka hitrost · Visoka natančnost · Visoka stabilnost Prihodila je serija VS – visokohitrostni laserski rezalnik cevi za majhne premere! Ta stroj ima izjemno natančen sistem vpenjanja (čok), posebej zasnovan za rezanje cevi. Z odličnim tesnjenjem in zaščito pred prahom dosega vpenjalno natančnost ≤0,1 mm, kar je idealno za izjemno precizno obdelavo majhnih cevi. Vpenjalna glava se vrti do 160 vrt./min, pospešek doseže do 1,5 G, brez težav omogoča visoko učinkovito obdelavo majhnih cevi. Podpira pravo ultra-kratko repno rezanje, kar takoj na začetku zmanjša stroške materiala. Na voljo v izvedbah 3000 W in 6000 W, Itsdewwzudopfx Al Nof za kvadratne in okrogle cevi premera od 10 mm do 120 mm, kot tudi za rezanje kotnikov, U-profilov in I-profilov. Prava vsestranska rešitev za izdelavo majhnih cevi. Podpira avtomatsko ali polavtomatsko podajanje, preprosto omogoča pametno in avtomatizirano proizvodnjo. En stroj nadomesti tri delavce — močno in učinkovito orodje za proizvodnjo majhnih cevi!

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Največja rezalna sila: 220kN, moč laserja: 3200W, priključek za dušik: 30bar, priključek za kisik: 20bar, priključna moč: 76kVA, obratovalne ure začetkom leta 2025: 67.766h, z laserjem Trumpf TLF 3200 in hladilnikom RIEDEL L 15/21 TR3/19.00, hladilno sredstvo: R134a, napolnjena količina: 11,5kg, visok tlak: 20,2bar. Orodja dodatno na voljo. Ogled na lokaciji možen. Ijdow Uk A Ropfx Al Nstf

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Ioderfx Utopfx Al Notf Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, najv. debelina jeklene pločevine: 2 mm, maks. debelina aluminijaste pločevine: 3 mm, Technical specifications: Maximum working length: 2160 mm Maximum sheet thickness (steel 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminium): 3.0 mm Maximum sheet width (unfolded): 1500 mm Maximum bending height on four sides (max): 203 mm Bending beam swing range: 180 degrees Machine width: approx. 5500 mm Machine length: approx. 7000 mm Machine height: 2500 mm Itjdpfx Aerwxkhol Nef Total weight: 23,000 kg Power: 25 kW Frequency: 50 Hz Pressure: 6 bar Loading system: Gantry blank feeder