Laserski vir

Trumpf TruDisk 4002 (4C)

Stanje: rabljeno, Trumpf TRUMPF TruDisk 4002 (4 C) High-power Solid-state Disk Laser with up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. Its combination of high output, excellent beam quality, and smart factory features makes it especially attractive for modern production lines. Machine type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No further in-house tests were conducted. Operating hours could not be read out. The laser ran flawlessly until the end. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient power & cooling systems: Gsdpfswzahdex Afqjtt Energy-saving modes, active power factor correction, pulse function for reduced consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C intake temperature) Reflection-resistant: special resonator design is suitable for highly reflective metals Industry 4.0 ready: Extensive sensors and data interfaces for condition monitoring, OPC UA, predictive maintenance Application possibilities: Scanner and hybrid welding (e.g. automotive body construction, shipbuilding) High-speed cutting, also on reflective metals Flame cutting & surface processing Cladding, hardening, deep penetration welding with high precision requirements Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50–60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection class: IP 54 Short-circuit capacity: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, feel free to call us.

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Gtodpfsfr Ih Djx Afqet Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter adjustment: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Includes 2x scanner optics (PFO) for the process cells, 3x fiber optic cables, and spare parts. Documentation available. Inspection on site is possible. Gtodpfewwll Hox Afqet

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min Gsdpfjvi Hrysx Afqett For further data, see data sheet Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. Gtjdor Ui R Nspfx Afqjt MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, IMMEDIATELY AVAILABLE – Chamber filter press by Häcker with supporting frame and 50 m³/h Abel pump for sale. Plate size: 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake thickness, capacity approx. 2700 liters, automatic plate shifting, open discharge into double-sided filtrate trough, press is ready for operation directly after installation. Abel pump was serviced by the manufacturer shortly before decommissioning. Galvanized support frame with staircase access. Located near Würzburg. Gsdpfxorunu Is Afqett

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Godpfx Afokh Niqeqett Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 5-osni rezkalni stroj Jobs. Tip jomach 143. CNC Fidia. Leto 1994. X4000 Y2700 Z1250. A 190. C neprekinjena. B. W. Cena 85.000 €. Gtsdpfx Afexr I Scoqjt

Leto izdelave: 1977, Stanje: rabljeno, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Control system: Machine weight approx. 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Standard processed wheelset track gauge: 1435 mm Supported track gauges: 1435 mm, 1524 mm, 1676 mm Processable wheelset length: 1640-3000 mm Wheelset running diameter: 700-1500 mm Driving diameter: 350-1350 mm Wheel tyre width: up to 140 mm Machine overall dimensions: 8700 x 3600 x 3250 mm Total installed power: 172 kW Machine weight: 59,200 kg Feed rate speeds Lifting and centering device: 2500 mm/min Gedpfx Aeuddgljfqott Headstocks: 1320 mm/min Quills: 550 mm/min Carriages (longitudinal direction): 1300 mm/min.

Stanje: dober (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 13.000 mm, pomik osi Y: 4.500 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 30.000 obr/min, razdalja med stojali: 6.500 mm, nos vretena: HSK A63, X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between columns: 6,500 mm C-axis: 190º A-axis: 110º Rapid traverse XYZ: 15,000 mm/min Rapid traverse AC: 10 rpm CNC control: Siemens 840D Spindle mount: HSK A63 Spindle speed: 30,000 rpm Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 units X-axis: 11,500 mm Y-axis: 3,500 mm Gtsdpfstt I Sfsx Afqet Z-axis: 750 mm Country of origin: Spain Machine dimensions (L x W x H): 19,000 x 11,000 x 6,770 mm Machine weight: 70,000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed for machining aeronautical materials (composite, aluminum, titanium, steel, etc.). The Torresmill Gantry combines perfectly with the Torrestool universal clamping system, ensuring flexibility and reduced cycle times.