Električni 4 -kolesni viličar

Toyota 8FBMT30

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 4.534 h, nosilnost: 3.000 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.800 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.400 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče tovora: 500 Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Tip pnevmatik spredaj: Superelastik Tip pnevmatik zadaj: Superelastik Baterija Volt: 80V Cgodpoy E A Tksfx Ahxet Baterija Ah: 700Ah Bočni pomik, 3. ventil, zadnja delovna luč, ogrevanje, STVZO, polna kabina, polni prosti dvig,

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm Cgsdpelgvkisfx Ahxjt - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 5.310 h, nosilnost: 3.000 kg, dvižna višina: 6.000 mm, prosto dvigovanje: 1.800 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.835 mm, dolžina vilic: 1.200 mm, lastna masa: 5.800 kg, skupna dolžina: 2.500 mm, vrsta pogona: Elektro, gradbena širina: 1.200 mm, Električni 4-kolesni viličar Težišče tovora: 500 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tip droga: Triplex Tehnično stanje: normalno Tip sprednjih pnevmatik: superelastična Stanje sprednjih pnevmatik: 60 - 80 % Tip zadnjih pnevmatik: superelastična Stanje zadnjih pnevmatik: 60 - 80 % Baterija Volt: 80V Baterija Ah: 700Ah Proizvajalec baterije: Kapatest 71% Leto izdelave baterije: 2015 Stranski pomik, 3. ventil, 4. ventil, zadnje delovne luči, prednje delovne luči, strešna zaščita, prednje steklo, impulzno krmiljenje, popoln prosti dvig, CE certifikat, Cgjdpfx Aox N U Diohxst

Stanje: dober (rabljeno), številka stroja/vozila: 48653674643798, Leto izdelave: 2018, obratovalne ure: 1.872 h, nosilnost: 3.000 kg, dvižna višina: 5.000 mm, skupna masa: 5.000 kg, Tip motorja: Električni, proizvajalec: Toyota Cedpfxow Ry Iuj Ahxsgt

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Cgjdpfx Ahofv Atloxot Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: novo, Leto izdelave: 2022, Uporabni material: kovina Stanje: novo Tip laserja: vlakenski (fiber) laser Delovno območje: 3000 x 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprte grafične oblike: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm CNC: da Način hlajenja: vodno hlajenje Krmilna programska oprema: Bodor Pro Država izvora: Kitajska Blagovna znamka: Bodor Cgodpfsgyw Sdex Ahxot Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Blagovna znamka laserske glave: bodorgenius Blagovna znamka krmilnega sistema: bodorpro Teža (kg): 2.200 kg Ključna prodajna prednost: ležišče iz varjene plošče tipa utor-pero (tenon-and-mortise) Garancija: 3 leta Moč laserja: 1.000 W Napajalna napetost: 110V/220V/380V, 50Hz/60Hz

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Cgsdogxi D Tspfx Ahxot Mitre band saw - Mitre cuts up to 60° to the left - Vise with quick-release mechanism - Band tension control - Electric cooling system

Stanje: novo, Bördelwerkzeug für Amada/LVD/Trumpf Cgedpfxji Hbcws Ahxet

Stanje: novo, Leto izdelave: 2025, Vstopni model laserskega rezalnika pločevine s svetlovodnim laserjem za kovine Nizki stroški laserskega rezanja in enostavno upravljanje Modularna miza za rezalni stroj z ojačitvami prihrani čas pri razstavljanju ter izboljša priročnost in togost. Posebna šoba za svetlovodni laser in postopek rezanja zagotavljata hitrejše rezanje ogljikovega jekla s kisikom, varčnejše rezanje nerjavečega jekla z dušikom pri nizkem pritisku ter boljšo kakovost rezanja ogljikovega jekla z zrakom. Svetlovodne laserske glave zaznavajo izstopajoče ovire, kar učinkovito zmanjšuje stopnjo poškodb in stroške vzdrževanja laserskega rezalnika. Cedjhv U Szopfx Ahxegt Uporabni material: kovina Stanje: novo Tip laserja: svetlovodni laser (fiber laser) Moč laserja: 1500W, 2000W, 3000W, 6000W Delovno območje: 4000 x 2000 mm Hitrost rezanja: 0–100 m/min Natančnost pozicioniranja: ±0,05 mm Ponovljivost pozicioniranja: ±0,03 mm Podprti grafični formati: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC: da Način hlajenja: vodno hlajenje

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Cgodpsxcuicefx Ahxjt Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs