TOX clinch enota – clinch stiskalnica, pnevmatsko-hidro TOX stiskalnica, hidro-pnevmatska stiskalnic

TOX KRAFT PAKET CRS 03.62

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic Punching Machine Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: • Punching force: 28 t • Worktable dimensions (width x length): 500 x 1000 mm Gbedpsrn Swkjfx Afqjg • Maximum sheet thickness: 6 mm (up to 40 mm punch diameter) • Maximum die diameter: 105 mm (up to 1 mm sheet thickness) • Maximum strokes: 180 strokes/min • Connected load: 5 kW • Voltage: 3 x 400 V / 50 Hz • Total weight: 2 tons • Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm • Tool cabinet, 4 drawers for tools • Foot pedal • All accessories shown in the photos are included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, - RABLJEN - STROJ ZA UPIGANJE CEVI OSÍ: 3 MAKSIMALNI PREMER CEVI: 30 x 2 mm DELOVNA DOLŽINA: 3000 mm Gbedpfjvhc Uujx Afqeg HITROST POZICIONIRANJA OSI X: 900 mm/s HITROST UPIGANJA OSI Y: 200 °/s HITROST ROTACIJE OSI Z: 360 °/s NAJVEČJI POLMER UPIGANJA: 20 DO 170 mm KRMILNA ENOTA: DNC800

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Gedpfx Afoiw Dlkjqjbg Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.680 mm, Oprema: varnostna svetlobna zapora, Cutting Line Perfecta Year: 2013, little used Gsdpfjwr Dgxex Afqjbg Larger, faster, more efficient: With a cutting width of 168 cm (66"), the Perfecta high-speed cutters handle large formats effortlessly. Comprising: - Pallet Loader Perfecta/Baumann BASA 7 - Paper Jogger - Rear Loading System - Perfecta 168 TS Guillotine Cutter - 3 color monitors with touchscreen: Cuttronic - Automatic adjustment - Corrosion-free, continuous air-cushioned surfaces on main table, side tables, and unloader - Photo-cell safety system - Number of knives: total 6 - Unloading System - Perfecta BA 6 to the left of the guillotine cutter This robust 2013 cutting line is in excellent condition and still in operation. Viewing by appointment. Available immediately as a complete system: - BASA 7 automatic pallet feeder - Jogger table - ZTS 2750 automatic gripper transport system to the rear table of the 168 guillotine cutter - BA6 unloader. This cutting line is ideal for medium to large volume production, providing continuous, fast and precise cutting. The system features corrosion-free stainless steel surfaces on the cutting and side tables, a powerful blower for the air cushion system, squareness correction, and hold-down devices.

Stanje: zelo dobro (rabljeno), Leto proizvodnje: 1991 Model: ITPS III Serijska številka: ITPS 80C 25 P1C226 Maksimalna stisna sila: 1800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se vklopi, vendar krmiljenje ne reagira na ukaze. Gbjdpswq Dpqefx Afqog Prejšnji uporabnik je zamenjal originalno krmiljenje AMADA z DELEM.

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Gbodpfx Ajh A Sfdefqsg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: rabljeno, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed to manufacture door and wall panels up to 610mm wide with an annual output capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Top Sheet Processing Section - 10 T top decoiler with coil car - Roller and pinch pass - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative pattern - Upper roller former (12 stands) - Upper forming mill steel frame - Upper sheet guide 2. Bottom Sheet Processing Section - 10 T bottom double decoiler with coil cart - Polyethylene film applicator - Corona treatment machine - Embossing machine - Bottom roller forming machine (12 stands) - Rolling conveyor - Entry line operator desk 3. Panel Formation Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Discharge roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit Godpfxjvtpcio Afqebg - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roller forming tools - Lower roller forming tools 6. List of Additional Machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Gbjdpfskvnumox Afqsg Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW Gbsdpfeixntwox Afqeg

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Gbjdsd Nb A Nepfx Afqeg The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.