Hidravlična enota za dvigala

Thyssen-M.A.N. 11,1 kW

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg Kjdpfeg Ezarox Aqgjlw *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Truxor amphibious vehicle suction dredger with pump and cutter, grab for removing silt, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier, specially designed for use in water bodies, wetlands, and shoreline areas. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel Emissions standard: EURO 3 33 kW / 44.9 hp / 3000 rpm Cooling system: approx. 8 liters Electrics: Alternator 12 V, 40 amp. Battery 45 Ah, work lighting Fuel: 35-liter tank, minimum consumption approx. 3.8 l/h, average approx. 4.5 l/h Hydraulic system: demand-controlled with dynamic adjustment, max. 140 l/min Tank volume 19 l + system approx. 36 l Joystick control: vehicle operation, lifting, tilting, weight distribution Cab: foldable canopy, adjustable driver’s seat, instrument panel Speed: 0-100 m/min (without attachments) Front lift: lifting capacity 250 kg Quick-change device for attachments, tilting function Saltwater-resistant aluminium, hot-dip galvanized steel frame Dimensions: Length 4700 mm, with lifting arm 5000 mm, width 2060 mm, height max. 2.59 m, min. 1.9 m Weight: 1400 kg (vehicle only), weight of components additional Klsdpfx Aqeyn Hpaegsw Truxor available from stock Gladbeck, without trailer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, brand KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, ready for immediate use, with low operating hours. Equipped with electronic injection and dosing units as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally) Core pull: 1 hydraulic Needle shut-off: pneumatic Tie bar extension: 160 mm Internal pressure sensor Ksdpeu Hxm Usfx Aqgjlw Selector valve Transport and loading can be organised Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your workshop? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 9.300 h, nosilnost: 3.500 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.500 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.200 mm, vrsta prenosa: samodejen, napetost baterije: 80 V, teža baterije: 1.580 kg, dolžina vilic: 1.150 mm, stanje pnevmatik: 95 odstotek, Tip prednje pnevmatike: superelastične pnevmatike (črne), tip zadnje pnevmatike: superelastične pnevmatike (črne), lastna masa: 6.400 kg, skupna višina: 2.200 mm, Oprema: bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, spojka prikolice, vilice za palete, Prodajam rabljeni Toyota električni viličar tip 8FBMT 35, letnik 2018, s triplex prostodvižnim drogom! Višina gradnje: 2,2 m Višina dviga: 4,7 m Nosilnost: 3500 kg Polne gumene pnevmatike 95% Hidravlični bočni pomik Dolžina vilic: 115 cm Polnilec je vključen Na viličarju sta bila že obnovljena oba pogonska motorja in zadnja os, prav tako je bila že zamenjana baterija! Kodpfx Ajxzr E Eoqgelw Viličar je takoj na voljo! Takoj pripravljen za uporabo! Viličarja si lahko ogledate in ga preizkusite pri nas! Prevoz lahko organiziramo po želji!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Clamping force: 25 tons Design: Shuttle table Opening force/stroke min.-max.: 100/225 mm Mould height variable min.-max.: 122-222 mm Shuttle table stroke: 500 mm Maximum weight on shuttle table: 120 kg Ejector force/stroke max.: 16/40 kN/mm Screw diameter: 22 mm Usable screw length L/D: 20 Kedevl Skaspfx Aqgslw Maximum screw stroke: 90 mm Shot volume: 34 cm³ Shot weight: 31 g Injection pressure: 2000 bar Operating hours: 7397 h

Leto izdelave: 1991, obratovalne ure: 32.000 h, stanje: generalkompletno obnovljen (rabljeno), • Ein Paar originale WEBER-Schnecken (ausgezeichneter Zustand, einschließlich Messprotokoll) • Ein Paar nicht-originale Schnecken • Getriebe von WEBER geprüft und teilweise überholt • Steuerung auf WPS-Steuerung aufgerüstet • Ausstoß auf PVC ca. 700 kg/Stunde Kledswaxuaopfx Aqgew

Leto izdelave: 1989, obratovalne ure: 24.048 h, stanje: dober (rabljeno), številka stroja/vozila: DS 85 777, Merk Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serienummer DS 85 777 Type Schroef Dubbele schroef Bouwjaar 1989 Draaiuren 24.048 U Kedpfxovuzqzo Aqgolw Schroefdiameter 87 mm Aansluitvermogen 90 kW

Stanje: rabljeno, Leto izdelave: 2006, System: Used Amphibious Suction Dredger, Amphibious Vehicle for Water & Land Type: Conver C 580 H Amphibious Boat Year of Manufacture: 2006 Application: This machine is specifically designed for combined operation on water and land, making it ideal for desludging, cleaning, and dredging tasks in bodies of water as well as in difficult-to-access wet areas. - Desludging of lakes, ponds, and canals - Operations in port facilities and shoreline zones - Suction removal of sludge, sediments, and sand - Maintenance and cleaning of waterways - Municipal and industrial applications Serial Number: 501 Operating Weight: approx. 2,750 kg Draft: approx. 0.85 m Freeboard: approx. 0.50 m Ground Clearance: approx. 0.30 m Speed: approx. 7 km/h (water) / up to 15 km/h (land) Dimensions: L (Transport) approx. 3.60 m, W approx. 1.80 m, H approx. 1.10 m (+ tracks) Kedpfx Asy Dz H Tsqgolw Working Dimensions: L approx. 4.20 m, W approx. 2.60 m, H variable, at least approx. 1.50 m Drive and Engine: Hatz diesel engine Output: 48 kW (65 HP) at 2,300 rpm, air-cooled Water Drive: 2 hydraulically-driven propellers (twin-screw) Land Drive: 6x wheel motors (Danfoss), 6x wheels, additional rubber track for rough terrain Hydraulic System: 2 x Sauer pumps (each max. approx. 120 l/min), Danfoss proportional valves, additional VCD valves for various functions Hydraulic Tank: approx. 200 litres Equipment: Heavy-duty boom (2-part 1..50+) Aluminium pontoons: hydraulically adjustable, extra wide Pontoon Adjustment: hydraulic Double mowing unit: (incl. blade and chain) Plant material collection frame: approx. 2.00 m with spring tines Sludge push blade: hydraulically adjustable Sludge dredge pump: with spray nozzle Supporting legs: hydraulically adjustable for dredging operations Comfort seat: rotatable Steering wheel: adjustable Dashboard: with display instruments Pump technology: speed approx. 1,600 rpm, pump pressure: approx. 30 mWC, power: 44–74 kW Features: Fully functional amphibious vehicle for water & land, suitable for work in accordance with public waterway regulations, environmentally compliant design, highly versatile. Condition: used, operational, age- and usage-related signs of wear Inspection: possible by appointment Other: Subject to errors, changes, and prior sale.

Leto izdelave: 2000, stanje: dober (rabljeno), For Sale: Horizontal flow packer + infeed conveyor from Dekapack Model: S4 - 35 / 2 Control system: Siemens S7 Documentation & electrical diagrams available. The machine is complete. Everything included as shown in the photos. Klodpjwtq I Eofx Aqgew Transport to be arranged by mutual agreement. Price: €5,000 EXW If you have any questions or remarks, please let us know! Best regards, Leo Holland

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Zapiralna sila: 25 ton Izvedba: Menjalna miza Odprtina sila/hod min.-maks.: 100/225 mm Višina orodja variabilna min.-maks.: 122-222 mm Hod menjalne mize: 500 mm Največja teža na menjalni mizi: 120 kg Izmetalna sila/hod maks.: 16/40 kN/mm Polž: 22 mm Uporabna dolžina polža L/D: 20 Hod polža maks.: 90 mm Prostornina hoda: 34 cm3 Teža brizga: 31 g Tlak vbrizga: 2.000 bar Obratovalne ure: 15.571 h Ksdoyfg D Sjpfx Aqgolw