Merilni sistem

TESA Scan 50 plus

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 9.564 h, Funkcionalnost: popolnoma funkcionalen, CNC FANUC 31i-MODEL B5 Gujdpfjwayv Eox Adkof TOOL PRESETTER No. 2 SELF-CENTERING CHUCKS No. 7 HSK TOOLS

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, partially operated with soft water. No dosing unit included! These machines are former lease units. Various equipment configurations available, potentially with internal water softening, GIO module, or completely without softening. Please let us know how you would like your package configured. The listed price is a base price depending on configuration—request your individual quote! Includes 6 months spare parts warranty. Preventive maintenance was always conducted, including replacement of various wear parts. Gusdpjp Ebn Defx Adkjf Viewing and test-run on site possible and encouraged. Technical data: Capacity: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Cycle times: 60/90/210 seconds Rack size: 500 x 500 mm Entry height: 440 mm Tank volume: 22 l Water consumption per rack: 2.6 l Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions (WxDxH): 635 x 750 x 1470/2050 mm Electrical installation: Electrical connection: Three-phase, 3 NPE, 400 V, 50 Hz. The wiring complies with VDE regulations. Water installation: The dishwashers can be connected directly to the fresh water supply without the need for additional safety fittings. Minimum flow pressure: 0.6 bar, maximum pressure: 5 bar. Please comply with installation guideline EN 1717. Drain: ¾". On-site wall drain max. 700 mm high. Connection hoses length approx. 1.8 m from the dishwasher. Collection of the machines is preferred. Shipping by freight forwarder possible at buyer’s expense.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), DMG PH 150-8, leto izdelave 2014, z paletami. Gujdpfjin Dklsx Adksf Na voljo je zaslon na dotik. Naprava je v odličnem stanju.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhauled in 2022 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 600 x 400 x 500 mm Distance spindle nose to table: 200–700 mm Maximum workpiece size (L x W x H): 1200 x 800 x 350 mm Maximum workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and EDM (U = 0–100 rpm) Pneumatic chuck of choice (Erowa/3R Systems) ISPG Generator, 80 Ampere Best achievable surface finish: Ra 0.08 µm AC FORM HMI operating interface 15” LCD colour display, mouse or touchscreen operation, lift keyboard and manual control unit Including 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5,504 kg Machine dimensions: 1,790 x 2,860 x 3,100 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Options: Guodewh Sigspfx Adkef - Commissioning and operator training - Transport and installation - Chiller unit - Dielectric fluid

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 850 mm, pomik po osi Z: 500 mm, model krmilnika: HEIDENHAIN 530, dolžina obdelovanca (maks.): 1.250 mm, širina obdelovanca (maks.): 850 mm, višina obdelovanca (maks.): 500 mm, teža obdelovanca (maks.): 1.200 kg, širina mize: 850 mm, višina mize: 640 mm, dolžina mize: 1.250 mm, največja hitrost vretena: 18.000 obr/min, razdalja od mize do središča vretena: 700 mm, število mest v zalogovniku orodij: 60, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DECKEL MAHO DMC 100V Stroj po popolni obnovi. Vreteno po obnovi in zamenjavi ležajev Laserski merilnik orodij BLUM Zaradi reorganizacije podjetja imamo na prodaj: HITRO 3-OSNO OBRATNO ORODJE Proizvajalec: DECKEL MAHO Tip: DMC 100V LINEAR Krmiljenje: HEIDENHAIN 530 Letnik: 2003 Velikost mize: 1250x800 Hod: X 1000, Y 800, Z 500 mm Teža obdelovanca: max. 1200 kg Generalna obnova stroja 06.2025 Vreteno: HSK 63A 18000 obr/min Moč S1/S2 15kW/19kW Navor S6 40%ED 130Nm Guedsx Elxispfx Adkjf Menjalec orodij: 60-kratni Merilna sonda HEIDENHAIN Merilna sonda za orodje: BLUM laser Transporter odrezkov Notranje hlajenje (IKZ) Stroj v zelo dobrem stanju, po popolni obnovi. Redno servisiran. Stroj je v stalni uporabi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm Gujdpjvwgl Nofx Adkjf V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Gjdpfxjvldx Ae Adkeuf Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.000 h, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Doosan Puma 700 XLY II Dolžina obdelave: 5.050 mm Premer obdelave: 700 mm z vgrajenimi pogonjenimi orodji in Y-osjo Osnovna oprema: - CNC krmilnik Fanuc 0i s funkcijo Manual Guide i - 45-palčna poševna plošča v cevni konstrukciji - Glavna vretena, podprta na 4 ležajih. Ležaji vretena Razred natančnosti P 4 - Mazanje za celo življenjsko dobo - Vpenjalna glava hidravlično upravljana s hidravličnim cilindrom popolnoma opremljena z varnostno napravo, posodo za zbiranje hladilne tekočine, nadzorom dviga in vlečnim orodjem - Avtomatsko centralno mazanje - Podporni konj, programirljiv - Ravne vodilne tirnice, kaljene, nasprotna stran pa prevlečena z Rulon 142 - Sistem za hladilno tekočino s tlakom črpanja 7 bar - Pokrov vodilnih tirnic osi Z - Popolna zaščita - Vodoodporna osvetlitev delovnega prostora - Vgrajeni nastavitveni vijaki in pritrdilne plošče Vključno z možnostmi Doosan: - Podporni konj, programirljiv (pogonjen s revolverno glavo) - Odstranjevalec olja - Sistem za hladilno tekočino s tlakom črpanja 14 bar - Elektronsko spremljanje loma orodja - Avtomatska roka za merjenje orodja - 3-barvna opozorilna lučka - Nadzor vpenjalnega tlaka - Dodatno ročno kolo - NC možnost poljubnega nastavljanja hitrosti navoja - 2x vrtalno-rezalna glava BMT 85 CC PRECI-FLEX; ravna ER50 - 2x vrtalno-rezalna glava BMT 85 CC PRECI-FLEX; pod kotom ER50 - Priprava za programirljivo hidravlično vpenjalno glavo (vključno z celotnim osnovnim telesom, priključeno za odpiranje/zapiranje vpenjalne glave preko funkcije M, ter osnovno telo, ki se samodejno pozicionira v smeri Z, pogonjeno s prečnim nosilcem brez vpenjalne glave) Schunk ROTA NC 630-180 2520-Sv90" Premer vpenjalne glave 630 mm Proizvajalec Schunk, s stožčastim zobanjem 90", vključno s prirobničnim in adapterjem za vlečno orodje Vpenjalna glava RX6-ZSW-100520 50-SCUW-95, samocentrirna, hidravlična vpenjalna glava, zaščiteno ohišje (proofline), merilni sistem za nadzor vpenjalnega območja (SCU-V), vgrajeni kanali za čiščenje/zaščita pred ostanki, šobe za čiščenje, izjemno kompaktna izvedba, vgrajeni cilindri s pretvornikom tlaka. Vpenjalno območje od 100 mm do 520 mm Godszlcyujpfx Adkeuf Brinkmann črpalka za povečanje tlaka 30 bar, vključno s filtrom Mahle 50p približno 30 bar, vključno s kartušnim filtrom, možno vključevanje preko funkcije M Pištola za hladilno tekočino z lastno črpalko Pištola za hladilno tekočino za čiščenje delovnega prostora pri odprtih vratih V avtomatskem načinu delovanja brez funkcije Tečajni trak za odvoz ostankov, izmet desno, kot naklona 50 stopinj, višina izmeta 1150 mm Voziček za odvoz ostankov Tip SKM750; volumen 0,75 m3; nosilnost 1000 kg; z valji in žepi za viličar.

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Gusdpsr A Hcbjfx Adkof Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: HAAS Model: Sigma 5 Gsdpfxox H Uz No Adkouf Glavni pogon Število osi: 2 Ta HAAS TR160 s Sigma 5 je bil izdelan leta 2016. Opremljen je z dvoosno mizo in servo motorjem Sigma 5, kar zagotavlja natančno in učinkovito delovanje. Idealno za tiste, ki želijo izboljšati svoje kapacitete obdelave. Za več informacij nas kontaktirajte. Vrste uporabe Druge obdelovalne stroje