Prenosni stroj

Technica Rotaflex 1 RTM

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min Gedox D Drcopfx Adkobr • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Make: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal bore D=51mm Control system: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in position 2/3 Electronic cam switchgear Balluff Gbodpfoiay Sfsx Adker Plain text display Wöhrle Coolant booster pump Magnetic cartridge filter Oil operation Including bar feeder IEMCA PRA40/37/F, year of manufacture 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from illustrations. Please contact us for more information and pictures via mail(at) or

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, An optical 3D coordinate measuring system Keyence with a 360° 3D scan is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/stitched: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Gbjdpfx Ajwx Rcyodkor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation Gbodew T Tcwjpfx Adksr - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen C16-VII CNC Swiss Type Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: main and sub spindle Gjdpov Rhd Hofx Adkebr 5 controlled servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: LNS Express 220 bar feeder, conversion kit for 16 mm and 10 mm Donaldson Torit extraction system Chip conveyor - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm Gbjdpfsx D Iuzox Adkjr • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), - RABLJEN - 6-OSNI AVTOMATSKI STRUŽNI STROJ S POMIČNO GLAVO IN DOVAJALNIKOM PALIC MAKSIMALNA DOLŽINA OBDELOVANJA: 320 mm MAKSIMALNI PREMER OBDELOVANJA: 32 mm VRETENO: 200–8000 min⁻¹; 3,7–7,5 kW PROTIVRETENO: 200–7000 min⁻¹; 1,5–2,7 kW POMIK OSI X1: 108 mm POMIK OSI X2: 228 mm POMIK OSI Y1: 275 mm POMIK OSI Z1: 325 mm Godpfx Ajvthv Isdksbr POMIK OSI Z2: 130 mm POMIK OSI Z3: 410 mm HITRI POMIKI OSI X-Y-Z: 20 m/min REVOLVERSKA GLAVA Z GNANIMI ORODJI: 8 POZICIJ; 200–5000 min⁻¹ KRMILNA ENOTA: CINCOM SYSTEM M6D DOVAJALNIK PALIC: IEMCA Mod. BOSS 332 EVOLUTION TEŽA: 2850 kg DODATNA OPREMA: LOVILEC OBDELOVANCEV

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre d'axes : 5 AXES LINÉAIRES - Course X : 400 [mm] - Course Y : 250 [mm] - Course Z : 250 [mm] - Vitesse de déplacement rapide : 24 [m/min] - Résolution : 0,0001 [degrés] PORTE-MEULE BROCHE VERTICALE - Axe C : 225 [degrés] - Résolution angulaire : 0,0002 [degrés] - Vitesse de rotation de la broche : 12 000 [tr/min] - Type d’outil : HSK-50E - Puissance d'entraînement de la broche : 15 [kW] PORTE-PIÈCE CONTRE-POINTE - Plage de vitesse (axe rotatif) : [tr/min] - Plage de vitesse (axe rotatif universel) : [tr/min] - Résolution angulaire : 0,0001 [degrés] ALIMENTATION ÉLECTRIQUE - Tension d'alimentation : 400 [V] POIDS ET DIMENSIONS - Encombrement : 1980 x 1750 [mm] - Hauteur de la machine : 1960 [mm] - Poids de la machine : 2800 [kg] ACCESSOIRES - Commande : SIEMENS SINUMERIK 840D Gbedswwa Dkjpfx Adker - Système automatique de chargement et de déchargement avec 50 positions

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 Gjdpfx Adeypxqrjkjbr - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total power: 28 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3870 x 1670 [mm] - Machine height: 2500 [mm] - Machine weight: 6000 [kg] OPERATING HOURS - Power-on hours: 23240 [h] - Operating hours: 19500 [h] ACCESSORIES - Control system: Traub TX 8i-p - 3-colour status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Workpiece removal - Parts conveyor belt - Bar feeder preparation

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of Axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z Axis: 450 x 270 x 310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel: -20/+115 degrees - Minimum resolution: 0.001 degrees TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 20 SWIVEL AXIS A - Max. bar diameter: 32 mm - Minimum resolution: 0.001 degrees - Travel: 360 degrees ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 17 kVA WEIGHT AND DIMENSIONS - Floor space required: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 5,100 kg MACHINE HOURS - Operating hours: 20,749 h ACCESSORIES - Control: Fanuc 31i-A5 Gbjdpfxjuhbtqe Adkjr - Interface: USB, PCMCIA, RJ45 - Fire extinguishing system*: KRAFT&BAUER FB703 * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Coolant tank - Spindle cooling - Oil mist extraction: HIFI FILTER - Tool measuring probe: Renishaw TS27R - Workpiece measuring probe: Renishaw OMP40 - System for 6th side machining - Collet chuck: ORTLIEB KSF 30-50 - Tool identification via RFID scan: BALLUFF BIS C-650 - Tool holder: 30