Tristrani prekucnik

Tatra T815-2 6x6 3 S. Kipper V8 luftgekühlt Nur260TKM

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), skupna masa: 2.600 kg, Leto izdelave: 2006, Cutting width: 600 mm Cutting length: 1200 mm Center distance between knife shafts: 250 mm Knife shaft speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Kjdpetzbvyofx Ah Asfa Total drive power: 22 kW Weight: 2,600 kg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2007, obratovalne ure: 966 h, številka stroja/vozila: 172740708, nosilnost: 120 kg, tip droga: teleskopski, dvižna višina: 14.000 mm, širina platforme: 1.400 mm, lastna masa: 1.650 kg, transportna dolžina: 4.000 mm, transportna višina: 1.950 mm, gradbena višina: 1.950 mm, naslednji pregled (TÜV): 02/2024, vrsta goriva: dizel, stanje pnevmatik: 50 odstotek, Tracked platform, tracked articulated boom lift Octopussy 14.12 Twin with switchable basket load of 120 kg and 200 kg, currently without inspection (TÜV), but in working condition. Diesel-powered, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Kfsdsw Aw Anepfx Ah Aja

Stanje: rabljeno, številka stroja/vozila: 1410A, prevoženi kilometri: 86.487 km, moč: 93 kW (126,44 KM), prva registracija: 07/1994, vrsta goriva: bencin, poraba goriva (kombinirana): 14 l/100 km, barva: zelen, vrsta prenosa: samodejen, emisijski razred: euro1, Oprema: pogon na vsa štiri kolesa, spojka prikolice, TÜV and AU will be renewed and it comes with a green environmental badge :-) Special military edition with long wheelbase, the Mercedes G is in excellent condition, including the bodywork! It’s unbelievable how the Swiss managed to keep it this way. The convertible top can be quickly transformed from an 8-seat passenger car to a 2-seat pickup—takes just a moment. We have around 10 G-models of this special type available. Cargo area dimensions L/W/H: 1760/1520/1250 mm. Ready for immediate use, directly from the military, very well maintained and serviced! Equipped with: 2850 mm wheelbase, 4-speed automatic transmission with low range, all-wheel drive, 4-cylinder petrol engine with 2299 cc displacement. Fuel consumption is around 13 liters per 100 km on the highway, just under 15 liters in city/short trips (info provided by our customers). Rear axle differential lock. (Truck registration possible—then only 2 front seats). Good tires 205R16, and much more. We also have several accident vehicles available at favorable prices! Perfect as a rally or hobby vehicle, also ideal for hunting—simply excellent. Matching with the G, I also have a 1-axle off-road trailer with overrun brake for sale. Several all-wheel-drive vehicles and other military vehicles are also available in my inventory. All my vehicles can be viewed on my website. Kfodpfsqx Sybjx Ah Aea So why drive all the way from Flensburg to Berchtesgaden to look at different cars, when you can find over 150 vehicles of the following types here: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc.—and all with TÜV. Plus, there are countless spare parts and accessories available. Why settle for less? Give me a call at 0049 (0)2248. Best regards, Philipp from Hanfbachtal.

Stanje: rabljeno, prevoženi kilometri: 380.000 km, Leto izdelave: 2011, Serijska številka: WDF6396051366xxxx Za več informacij se obrnite na ATS Norway. Prosimo, navedite referenčno številko ob povpraševanju: 21890 Specifikacije: - TÜV veljaven do 30.04.2027 - Prevoženih kilometrov: pribl. 380.000 km - Avtomatski menjalnik - Zimske pnevmatike z žeblji - Kljuka za prikolico - Letne pnevmatike - 2 stranska vrata - Euro 5, 163 KM - Nova vžigalna ključavnica in vžig - Radio/CD - Klimatska naprava - Pripravljen za dostavo Opis: Mercedes Vito, letnik 2011, z 380.000 km. TÜV pregledan in pripravljen za dostavo. Prodaja se z dvema kompletoma pnevmatik. Kfodpsxy Eu Defx Ah Asa Km: 380000 KM: 163 TÜV: Da EU odobren do: 30.04.2027 Lastna teža: 1850 kg Skupna teža: 3050 kg Nosilnost: 1125 kg Širina: 191 cm Dolžina: 524 cm Euro: 5 Model: VITO Menjalnik: Avtomat

Stanje: rabljeno, Gebruikte DSI V-5 32/100 verticale plaatvriezer op Freon/NH3 met 32 stations. Binnenafmetingen per station: 810x100x580 mm (LxBxH). Totale blokafmetingen: 4100x840x580 mm (LxBxH). Capaciteit en voorbeeldberekening gebaseerd op: - 47,9 kg visfilet per station - 32 x 47,0 liter vriesstations - Producttemperatuur van +10°C tot -18°C - Duur van één cyclus is 185 minuten, inclusief ontdooien, laden en lossen - Verdampingstemperatuur van -34°C - Visfilet: 497,3 kg/uur Capaciteit en voorbeeldberekening gebaseerd op: - 44,7 kg schol en haring per station - 32 x 47,0 liter vriesstations - Producttemperatuur van +10°C tot -18°C - Duur van één cyclus is 190 minuten, inclusief ontdooien, laden en lossen - Verdampingstemperatuur van -34°C - Schol en haring: 451,0 kg/uur Kfsdpfsrlk H Rox Ah Aoa

Stanje: rabljeno, Gebruikte Jackstone verticale plaatvriezer met 20 stations en een capaciteit van 45 kW (bijvoorbeeld voor het invriezen van 364,7 kg visfilet per uur). Inclusief verstelbare blokverdelers waarmee 40 stations gecreëerd kunnen worden. Binnenafmetingen 1 volledig blok per station: 1060x100x520 mm (55 liter) Binnenafmetingen 2 blokken per station: 527x100x520 mm (27 liter) Kfedpfxerlk Ico Ah Aea Capaciteit en voorbeeld gebaseerd op: - 56,2 kg visfilet per station - 20 x 55,1 liter vriesstations - Temperatuur van +10°C tot -18°C - Duur van één cyclus: 185 minuten inclusief ontdooien, laden en lossen - Verdampingstemperatuur: -34°C - Visfilet: 364,7 kg/uur Capaciteit en voorbeeld gebaseerd op: - 52,3 kg platvis en haring per station - 20 x 55,1 liter vriesstations - Temperatuur van +10°C tot -18°C - Duur van één cyclus: 190 minuten inclusief ontdooien, laden en lossen - Verdampingstemperatuur: -34°C - Platvis en haring: 330,7 kg/uur

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, širina odprtine za polnjenje: 700 mm, dolžina polnilne odprtine: 750 mm, Untha RS 50 drobilnik Moč: 2 x 22 kW / 380 V 50 Hz Električna omarica - Siemens S7 Dimenzije komore: 700/750 mm Sistem za hitro menjavo sita. Teža cca 3500 kg. Novi noži. Stroj v idealnem stanju. Cena po dogovoru. Več slik in videoposnetek delovanja na zahtevo. Možnost izvedbe testov. Dodatne informacije po telefonu. Kfedpfsxlgqwsx Ah Aoa

Stanje: dober (rabljeno), barva: rdeča, Leto izdelave: 2009, General Information Intended use: Construction Drivetrain Fuel type: Electric Weights Unladen weight: 1,975 kg Functional Lifting capacity: 200 kg Lifting height: 1,600 cm Kfjdpfx Ahoxyqx Is Asa Working height: 1,800 cm CE certification: yes Maintenance, History, and Condition Number of owners: 1 Technical condition: good Optical condition: good Further Information Terms of delivery: EXW Max. horizontal outreach: 11.30 m Max. jib articulation angle: 90° Max. platform swing angle: 999° Transport dimensions (L x W x H): 7.82 x 1.84 x 2.14 m Last inspection: 2025-11-11 Country of manufacture: DK Contact Rothlehner Arbeitsbühnen GmbH for more information. Working height: 18.00 m Platform load capacity: 200 kg / 2 persons Slew range: continuous Lateral outreach: 11.30 m / 80 kg Own weight: approx. 1,975 kg Passage width: 1.84 m Passage height: 2.14 m Total length: 7.82 m Proportional control Internal flat cable energy supply Battery drive: 4 x 6 V / 180 Ah, fully automatic charger Aluminium telescopic boom, seamless Nylon-stainless steel guide profile Load moment limitation 600 mm jib arm Aluminium work basket, rotatable 2 x 45° Basket size: 0.70 x 1.20 x 1.10 m Double 230 V socket in work basket Hydraulic drive for maneuvering on slopes up to 15% The machine will be technically overhauled and is fully functional, TÜV and safety inspection will be updated. All documents are available. Service and spare parts supply are ensured. Why are no prices indicated? Our prices depend in part on the customer’s requirements regarding the level of cosmetic and technical reconditioning, or on possible special equipment options. These individual configuration possibilities are appreciated by many customers. We are happy to clarify all questions in a personal consultation. Please include your telephone number with your inquiry so our team can give you comprehensive advice.

Stanje: novo, Leto izdelave: 2024, Genie Z-45FE hybrid articulated telescopic boom lift, new, used, and demo machines available Kedpsrnqpwsfx Ah Ajfa

Stanje: dober (rabljeno), barva: rdeča, Leto izdelave: 2000, General Information Kodpfxjw Ia Aae Ah Aofa Usage purpose: Construction Powertrain Fuel type: Electric Weights Unladen weight: 3,500 kg Functional Lifting capacity: 200 kg Lifting height: 2,800 cm Working height: 3,000 cm CE marking: Yes Maintenance, History and Condition Number of owners: 1 Technical condition: Good Optical condition: Good Additional Information Delivery terms: EXW Max. horizontal outreach: 1,160 m Max. boom slew angle: 90° Max. platform slew angle: 999° Transport dimensions (L x W x H): 8.9 x 1.72 x 2.13 m Last inspection: 2025-08-04 Country of manufacture: DK Further Information Contact Rothlehner Arbeitsbühnen GmbH for more information. Working height: 30.00 m Platform capacity: 200 kg / 2 persons Rotation range: Continuous Outreach sideways / at 28 m: 11.60 m / 80 kg Outreach sideways / at 30 m: 11.00 m / 80 kg Unladen weight: approx. 3,500 kg Passage width: 1.72 m Passage height: 2.13 m Total length: 8.90 m Proportional control Power supply: battery 8 x 6 V / 180 Ah Drive: diesel engine Hour meter Aluminium work platform, rotatable 2 x 45° Platform dimensions: 0.70 x 1.20 x 1.10 m 230 V socket in the work platform Tool trays in the work platform Hydraulic outriggers Support plates 40 x 40 x 2.7 cm with mount Hydrostatic drive, up to 15% gradeability Operation of drive and outriggers possible from the work platform The unit will be technically refurbished and is fully operational; TÜV and safety inspections will be updated. All documentation available. Service and spare parts support are guaranteed. Why don't we state prices? Our prices partly depend on the customer’s requirements regarding the desired level of optical and technical refurbishment, or on potential special equipment. These individual options are gladly utilized by many customers. All questions can be answered in a personal consultation.