Navpični obdelovalni center

Takumi V18A

Stanje: dober (rabljeno), Leto izdelave: 1998, CNC obdelovalni center TAKUMI V18A Leto izdelave: 1998 Krmiljenje: FANUC 0-MC Tehnični podatki: X-os: 1800 mm Y-os: 850 mm Z-os: 750 mm Velikost mize: 2000x800 mm Fsdpfxeyingaj Altsgd Število T-ut: 5 Velikost T-uta: 22 mm Razdalja med T-utami: 150 mm Razdalja miza – nos vretena: 200–950 mm Območje vrtljajev: 40-4500 min⁻¹ Število mest v orodjarni: 32 Teža stroja: 16.500 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Fedpoxc Hh Dofx Altogd Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details.

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Fedpfxsgyy I Ao Altegd — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: rabljeno, Leto izdelave: 2017, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, Opis: Fgodpey Eu Tvofx Altod Splošno: Letnik izdelave: 2017 Krmiljenje: Heidenhain TNC 640 Hodi X/Y/Z: 4.500/1.800/1.300 mm Število vrtljajev: 5.000 obr/min Vpenjalni konus: SK 50 Glava za rezkanje (vreteno): Tehnologija: Diagonalna glava z menjalnim vretenom Delitev: 0,001° Število vrtljajev: 5.000 obr/min Vpenjalni konus: SK 50 Največja moč: 43 kW Največji navor: 1.045 Nm Dovod medijev: KSS + zračno pihanje Delovna miza: Vpenjalna površina: 6.000 x 1.100 mm T-utori: 6x 22H12, razmak 140 mm Magazin orodij: Tehnologija: Verižni magazin Število postaj: 40 Menjalec orodij: Dvojni prijemalec (horizontalno/vertikalno) Največji premer orodja: 125 (250) mm Največja dolžina orodja: 400 mm Oprema / dodatki: Merilni sistemi: Neposredno na vseh oseh Odstranjevanje odrezkov: Transportni trak za odrezke Dovod hladiva: IKZ sistem s filtrom, 20 bar Merjenje obdelovanca: Brezžična merilna sonda M&H Nastavitveni način: Elektronsko ročno kolo HR 510 Programska opcija: Adaptivni nadzor

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Discover our selection of robust and precise bed type milling machines! Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and refurbished bed milling machines. Our machines offer X-axis travels from 1500–5000 mm and are available with Heidenhain or Siemens controls. With Y- and Z-axis travels up to 1200 mm, your machining possibilities are virtually limitless. A selection of our refurbished machines are in stock and available at short notice! Explore our comprehensive range of special accessories such as universal milling heads, tool changers, and much more to make your bed milling machine even more versatile. Whether you’re machining complex components or tackling demanding tasks, our machines deliver optimal results every time. Rely on our years of experience and let us help you optimize your machining processes. Invest in quality and precision—contact us today! Below is a selection of available machine types; upon request, we can also offer additional models or custom machines: MAIN TECHNICAL DATA: BFM series including BAFA funding of 15% or more! X travel 1500–5000 mm Y travel 1000 mm Z travel 950 (optionally 1500) mm Max. table load 5000 kg Spindle taper 50 SK Spindle speed 3500 (optional 5000) rpm Spindle drive 15/18.5 (optional 22/26) kW ACCESSORIES: manual universal head, Siemens or Heidenhain control, linear scales on X/Y/Z axes, chip conveyor (screw conveyor, front/rear), and much more. Extensive SPECIAL ACCESSORIES available on request to further enhance your machine’s productivity: Fgedpfx Alepwn Hhoted CURRENTLY AVAILABLE REFURBISHED MACHINES with warranty and BAFA funding, e.g. - CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, etc. - CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (every 0.1º) / 6,000 rpm, etc. - CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2500 / 1000 / 1000 mm, automatic indexing differential head UAD (every 0.1º) / 6,000 rpm, automatic tool changer (30 tools), etc. - CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2500 / 1000 / 1000 mm, automatic indexing milling head UDG40 (every 2.5º), etc. - CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2500 / 800 / 800 mm, manual milling head, etc. - NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3000 / 1200 / 1000 mm, extended manual milling head (UL40), etc. - CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3000 / 1200 / 1000 mm, universal milling head with automatic indexing UDG (every 2.5º), automatic tool changer (ATC30), etc. Additional models in stock or available at short notice. Contact us now and discover the world of innovative bed type milling technology! Our services for you: • On-site consultation and solution development • Organization of machine transportation to your facility • Installation, commissioning, and turnkey handover • Financing and support with funding options via KFW, BAFA, and more.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 Fjdpfxoyuzg Hs Altjgd 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 5.500 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 15 obr/min, širina mize: 1.200 mm, dolžina mize: 6.000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2006 Capacities / Travel paths: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Transverse (Z): mm 1,000 Clamping table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on Fgodpfx Ajy Tkgboltsd table surface: 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush-integrated into table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: 9 T-slot size: mm 22 Distance between T-slots: mm 100 Paint finish: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 28 kW Spindle speed range: Spindle speed: min⁻¹ 15 – 5,000 Torque: Nm 815 Feeds: X-, Y- and Z-axis mm/min 2 – 10,000 Max. rapid traverse rate: X-, Y- and Z-axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this range are sourced through a strict selection process and subjected to a comprehensive inspection (deep-dive check) by us. After intensive cleaning, all identified visible defects and faults have been professionally repaired by our expert service team.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, CNC Gantry Milling Machine | Manufacturer: ANAYAK | Model: HVM-6000-P | Year of manufacture: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating Hours (as of 02.03.2026): - Control on: 129,206 h - Machine on: 88,579 h Fgedpfjyry Rfjx Altsd - Program run: 31,645 h - Spindle running time: 26,813 h TECHNICAL DATA Travel: - X-axis (longitudinal): 5,300 mm - Y-axis (cross): 1,500 mm - Z-axis (vertical): 2,500 mm Table: - Table surface: 6,000 x 1,200 mm - Max. table load: 15,000 kg/m² Spindle Taper: - Tool holder: ISO 50 Milling Head - Multi-angle, 45°: - Angular positioning: Automatic on axes B and A - Speeds for continuous adjustment: 60 - 4,000 rpm Feed rates: - Working feed: 10,000 mm/min - Rapid traverse: 20,000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Automatic tool changer, 100-position chain magazine - 2 x electronic handwheel - 2 x chip conveyor - External and internal coolant supply through the spindle - Tool magazine, multiple stations - CE marking - Documentation No guarantee for completeness or accuracy of technical data and equipment details. Subject to prior sale. Detailed technical datasheet and further information about the equipment are available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, X travel: 2500 mm Y travel: 800 mm Z travel: 750 mm Control: HEIDENHAIN TNC430i Table size (lengthwise): 3220 mm Table size (crosswise): 800 mm Tool holder: ISO SK40 Spindle speed: 15,000 rpm Connected load: 25 kVA Tool changer: 40 positions Machine weight: approx. 20 t Space requirements: approx. 6.5 x 3.8 x 3.7 m This HEDELIUS BC80 is in good condition and can be inspected under power by arrangement with the seller. Description: Model: Hedelius BC80 Type: 4-axis machining center Control: Heidenhain TNC430i Year of manufacture: 2000 X-axis travel: 2500 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Clamping area table: 3220 x 800 mm Tool holder: SK40 Tool changer: 40 stations Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Rinsing guns - Tool measurement system Renishaw TS27R - Workpiece measurement system Renishaw infrared - Ethernet connection - Manual control module Fgsdpfxexa Hl Do Alted Miscellaneous: - Ball screws on X and Y axes replaced in 2018 - Complete documentation available Machine weight: approx. 20 t Footprint: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, širina mize: 1.000 mm, dolžina mize: 4.200 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Fgsdpfx Aloy T Elletsd TECHNICAL MAIN DATA Year of manufacture: 2007 Capacities / Travels: Longitudinal (X): 4,000 mm Transversal (Y): 1,200 mm Vertical (Z): 1,500 mm Table size: Length: 4,200 mm Width: 1,000 mm T-slot width: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 30 kW Spindle speed range: Spindle speed: 20–3,000 rpm Feed rates: X, Y, and Z axes: 2 – 12,000 mm/min Max. rapid traverse speed: X, Y, and Z axes: 15,000 mm/min Weight: approx. 22,000 kg HEIDENHAIN iTNC 530 Automatic MTE Diagonal Milling Head Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (Deep-Dive-Check) by our team. After intensive cleaning, any obvious defects and faults detected are professionally rectified by our expert service team.