Valjčna brusilka

Studer S20-2

Stanje: rabljeno, TECHNICAL DATA - Centre height: 100 [mm] - Distance between centres: 650 [mm] - Max. table swivelling: [degrees] Cgedpfsyn R I Hox Ahxot - Travel: 650 [mm] - Feed rate: 100 - 3500 [mm/min] GRINDING WHEEL HEADSTOCK - Swivel range: [degrees] - T1 grinding wheel dimensions: 350 x 32 x 127 [mm] - Power: 3 [kW] - Speed: 1600 - 2200 [rpm] - Peripheral speed: [m/s] WORKPIECE HEADSTOCK - Spindle speed: - 1200 [rpm] - Power: 0.5 [kW] - Taper type: MT4 (Morse Taper 4) - Max. workpiece weight: 20 [kg] - Swivel range: 0 - 90 [degrees] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Power: 8 [kVA] WEIGHT AND DIMENSIONS - Footprint: 00 x 00 [mm] - Machine height: 1650 [mm] - Machine weight: 1900 [kg] OPERATING HOURS - Hours under power: 01 [h] ACCESSORIES - Sony LG20-2 display unit - Automatic contact detection: SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 steady rest with three supports

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swiveling range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum indexing increment: 2.5 [degrees] Cedpfxeylc R Uo Ahxjgt - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLESTOCK - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill travel: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 20 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] ACCESSORIES - Control: FANUC Oi-TD - Electronic handwheel - 3-color status indicator light - Oil mist extraction unit - Direct measuring systems for axes: X / Z - Dynamic balancing of grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Stationary dressing device - Workpiece touch probe - Coolant tank: 375 [l] * with paper filter

Stanje: rabljeno, Leto izdelave: 1987, Premer brušenja 200 mm Dolžina brušenja 400 mm Višina konic 100 mm Geometrijsko obnovljena in na novo prebarvana Z notranjo brusilno enoto Dodatna oprema na zahtevo Cjdovw Duuopfx Ahxsgt Stroj je možno pri stranki pod napetostjo ogledati do vključno januarja 2026.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, IMMEDIATELY AVAILABLE Studer S20-2 – Mechanically Overhauled Grinding length: 400 mm Centre height: 100 mm Table swivelling: 30° Spindle bore diameter: 127 mm Grinding wheel dimensions: 350x32 mm Headstock taper: MT4 (dead and live centre) Tailstock taper: MT2 Quill stroke: 20 mm Workpiece weight: 20 kg Tailstock with manual cylinder error correction Cgodpsfg Tbrjfx Ahxot Further possible options: - Glass scales on X- and Z-axis - Internal grinding device - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device

Stanje: rabljeno, Manufacturer: CINCINNATI Cgodewrpykjpfx Ahxst

Stanje: rabljeno, TECHNICAL DATA - Center height: 100 [mm] - Distance between centers: 650 [mm] - Max. table rotation: [degrees] - Travel path: 650 [mm] - Feed rate: 100 - 3500 [mm/min] GRINDING WHEEL-HEAD SPINDLE BASE - Swivel angle: [degrees] - T1 Grinding wheel dimensions: 350 x 32 x 127 [mm] - Power: 3 [kW] Cgjdsxrg Hxjpfx Ahxst - Speed: 1600 - 2200 [rpm] - Peripheral speed: [m/s] WORKPIECE HOLDER HEADSTOCK - Spindle speed: - 1200 [rpm] - Power: 0.5 [kW] - Taper type: MT4 - Max. workpiece weight: 20 [kg] - Swivel range: 0 - 90 [degrees] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Power: 8 [kVA] WEIGHT AND DIMENSIONS - Required space: 00 x 00 [mm] - Machine height: 1650 [mm] - Machine weight: 1900 [kg] MACHINE HOURS - Total power-on hours: 01 [h] ACCESSORIES - Sony LG20-2 digital readout - Automatic contact detection: SENSITRON 6 - 1 tailstock with fine adjustment - 2 internal grinding spindles: 20,000 / 60,000 [rpm] - Fixed dressing device - Coolant tank - 1 steady rest with three jaws - 3-jaw chuck Ø 100 mm - Various grinding wheels

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 100 mm, dolžina brušenja: 650 mm, Stroj za notranje in zunanje valjasto brušenje Studer S20-2 Razdalja med konicami: 650 mm - Višina konic: 100 mm Dodatki na zahtevo! Cedpfxsqv Eg Rs Ahxjgt Pripravljen za dostavo!

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Cgodpfx Ahjt Hw N Hoxjt Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, TECHNICAL DATA - Centre height: 100 mm - Centre distance: 650 mm - Internal grinding length: 100 mm - Internal grinding diameter: 3 to 40 mm - Max. table swivel: 30° - Workpiece holder headstock * Spindle speed (variable): 60–1200 rpm * Motor power: 0.5 kW * Internal taper: Morse 4/2 - Grinding wheel dimensions: 350 x 30 x 127 mm - Grinding wheel spindle headstock * Power: 3 kW * Swivel: 15/30° - Max. workpiece weight: 20 kg - Total power requirement: 5 kW WEIGHT AND DIMENSIONS - Required floor space: 3000 x 1400 mm - Machine height: 1600 mm Codpfx Ajuhby Rjhxogt - Machine weight: 1900 kg ACCESSORIES - Complete internal grinding attachment: 45,000 rpm - 1 complete coolant unit - 1 tailstock with fine adjustment - 1 reversible and adjustable dressing unit - 1 swiveling diamond holder - 2-axis digital readout (X, Y) - 3-point steady rest

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine Cgedet Hw Najpfx Ahxst with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.