STROJI ZA ZUNANJE BRUŠENJE

STUDER S 31 CNC

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Centre height: 175 mm, grinding length: 650 mm, B-axis: -15°/195°, workpiece speed: 1750 rpm, grinding wheels T1/T2: 500 mm/400 mm, bore: 203 mm, max. workpiece weight: 80 kg, workpiece headstock: MT4, tailstock: MT3. Machine dimensions X/Y/Z: approx. 3000 mm/3000 mm/2100 mm, weight: approx. 4000 kg, operating hours: 56,300 h, control: GE Fanuc Series 16i-T. Documentation available. An on-site inspection is possible. Expected to be available from February/March 2025. Gisdpfxouku Syj Afqol

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing diameter over cross slide 700 mm Giedpfx Afjwhkdcoqjl Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Giodot Tqrnspfx Afqjl Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Giedpfx Aoxddvnofqjl Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Vrsta stroja: CNC stroj za cilindrično brušenje Proizvođač: Fritz Studer AG Model: S22 Godina proizvodnje: 2010 Upravljački sustav: FANUC 31i-A CNC Osnova stroja: Granitan® S103 mineralni odljev Konfiguracija: Fiksna ravna brusna glava za vanjsko (OD) brušenje Automatizacija: Automatski sustav za utovar s integriranim FANUC robotom Razmak između centara: 650 mm Visina između centara: 175 mm Maks. težina obratka: 150 kg Maks. duljina obratka: 700 mm Maks. promjer obratka: 449 mm Gjdpfx Aowl Uvkefqeil Promjer brusnog kotača: 610 mm Širina brusnog kotača: 160 mm Brzina brusnog kotača: do 3.200 okr/min Snaga vretena: 15 kW Tip brusne glave: fiksna ravna Pomak po X-osi: 310 mm Pomak po Z-osi: 850 mm Maks. brzina po X-osi: 15.000 mm/min Maks. brzina po Z-osi: 30.000 mm/min C-os: Potpuna rotacija glave obratka Programsko sučelje: StuderWIN s FANUC 31i-A Dodatni softver: StuderGRIND Automatizacijska sučelja: Standardna sučelja za utovarivače i periferne uređaje Dodatna oprema: Rotacijski dreser, Heidenhain mjerne letve, razni učvršćivači

Leto izdelave: 1971, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 713406, -KOM 105- Offered here is a powerful high-performance grinding machine from Kehren & Co, equipped with a paper band filter system by FAUDI. This is a segment grinding machine featuring a vertical grinding spindle. The machine is fitted with two grinding tables/magnetic chucks, enabling pendulum machining operations. Technical Data: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: Segment grinding Control system: Marposs Weight: 6,600 kg Paper Band Filter System: Gisdpfx Aeg Nt A Eofqel Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Year of manufacture: 1992

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Gisdpfxedf Ufpj Afqjl Article number: HAW1700-EV-RC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC Double Spindle Turning Center Control: CNC Path Control incl. 19" TFT Siemens Sinumerik 840 D sl Solution Line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool axis resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reducing tubes - NC-controlled workpiece pick-up device for both main and counter spindle The system consists of NC-controlled *Horizontal axis Godpfx Aswcd S Nefqjil *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws - Conveyor belt for removal of workpieces from the machine - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction unit - Control cabinet cooling unit (up to 40°C) - Counter spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet size 100 for main spindle - 1 collet chuck for quick-change collet size 100, Nova Axis Fix for counter spindle - Approx. 40 various quick-change collets size 100 (full inventory) - Tool change device, pneumatic, ø 100 mm - Approx. 50 various tool holders, fixed and driven (full inventory) - Mounting elements - Documentation

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard Giedpjvuua Nefx Afqel With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms An optional soundproof booth can be offered – price upon request.

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations Gedjvivx Nspfx Afqeil NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours