Notranji brusilni stroj cnc

STUDER CT 450

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Gisdpexddvnefx Afqjl Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Vrsta stroja: CNC stroj za cilindrično brušenje Proizvođač: Fritz Studer AG Model: S22 Godina proizvodnje: 2010 Upravljački sustav: FANUC 31i-A CNC Osnova stroja: Granitan® S103 mineralni odljev Konfiguracija: Fiksna ravna brusna glava za vanjsko (OD) brušenje Automatizacija: Automatski sustav za utovar s integriranim FANUC robotom Razmak između centara: 650 mm Visina između centara: 175 mm Maks. težina obratka: 150 kg Maks. duljina obratka: 700 mm Maks. promjer obratka: 449 mm Promjer brusnog kotača: 610 mm Širina brusnog kotača: 160 mm Brzina brusnog kotača: do 3.200 okr/min Snaga vretena: 15 kW Tip brusne glave: fiksna ravna Pomak po X-osi: 310 mm Pomak po Z-osi: 850 mm Maks. brzina po X-osi: 15.000 mm/min Maks. brzina po Z-osi: 30.000 mm/min C-os: Potpuna rotacija glave obratka Programsko sučelje: StuderWIN s FANUC 31i-A Dodatni softver: StuderGRIND Giodpfx Aewl Uvkjfqel Automatizacijska sučelja: Standardna sučelja za utovarivače i periferne uređaje Dodatna oprema: Rotacijski dreser, Heidenhain mjerne letve, razni učvršćivači

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V Giodsup Hw Eopfx Afqel - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Leto izdelave: 2021, Stanje: novo, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace throughput: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Godpfxog E S Ins Afqsil Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Giodpfx Asxa Eudofqol Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61373, It is in working condition. Giedpovwlf Isfx Afqol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Gijdpfjvgxfyox Afqjl Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis Giedpfouxfucjx Afqjl - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 - Center height: 175 mm - Distance between centers: 1000 mm LINEAR AXES - Grinding length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK - Continuous orientation: +/-8.5° - External grinding wheel dimensions: 500 x 80 x 203 mm - Grinding spindle headstock drive power: 7.5 kW - Cutting speed: 44 m/s WORKPIECE SPINDLE HEADSTOCK - Taper type: MT5 - C-axis: +/-0.5° - Drive power: 1 kW - Rotational speed: 30-1,000 rpm TAILSTOCK - Taper type: MT3 - Quill stroke: 35 mm - Quill diameter: 50 mm - Max. workpiece weight between centers: 130 kg ELECTRICAL SUPPLY - Supply voltage: 400V 50 Hz - Machine dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg TOTAL OPERATING HOURS - Operating hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Remote control with electronic handwheel - SENSITRON - Dynamic balancing device Hydrobalance HBA 40000-1 - Automatic length measuring arm MOVOMATIC C25 - In-process external diameter measuring arm MOVOMATIC - Grinding wheel guard with automatic tilting Gsdpeuhbydsfx Afqjil - Fixed diamond dressing device on workpiece spindle headstock - Coolant tank: 375 l - Paper filter - Oil mist extraction - Grinding wheel holder flanges

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Travels: X-axis longitudinal (table): 1800 mm Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. Gsdpfowcldajx Afqeil For further technical details, please refer to the photos.