VS-22257 Električni paletni viličar Still EXU-SF 25, vilice 1600 mm

STILL EXU-SF 25

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 5.316 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 213 mm, pomik osi Y: 51 mm, pomik po osi Z: 572 mm, število osi: 3, Ta 3-osna HAAS ST-20Y je bila izdelana leta 2014. Opremljena je z CNC stružnico s C- in Y-osjo, hitrostjo vretena 4000 vrt/min in velikostjo vpenjalne glave 8 palcev. Druge značilnosti so 12-pozicijski revolverski nosilec orodij, transporter odrezkov in programabilen hidravlični konjiček. Idealna je za natančna struženja. Če iščete kakovostne rešitve za struženje, razmislite o stroju HAAS ST-20Y, ki ga ponujamo v prodajo. Za več informacij o tem stroju nas kontaktirajte. Lhsdex D Nzpjpfx Adkod

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls Lsdjg Tzbhepfx Adkehd • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Ljdpjv N Di Aefx Adkehd Spindle: Taper: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, X 1740 mm, Y 766 mm, Z 660 mm 10.000 obr./min Deli, prikazani na roki, niso vključeni. Lodpfx Aowyblzjdkshd

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Lhjdpfowrzkzsx Adked Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Lhsdpfxsrx Rxte Adksd Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Lhjdpfx Aswzbq Tsdked Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 5279, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 1.300 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 22 obr/min, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Lhjdpfxsu Sppwo Adkod Horizontal longitudinal (X axis): 8,000 mm Spindle slide vertical (Y axis): 1,600 mm Spindle horizontal cross (Z axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS HANDHELD OPERATION DEVICE B-MPI INTEGRATED OPERATING PLATFORM 3-SIDED SPLASH AND CHIP GUARD CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm; Width: 2,500 mm WASHDOWN GUN IN WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l COLLISION MONITORING SYSTEM, 2-CHANNEL unit 2 monitoring channels: - 1st: Collision monitoring for orthogonal milling head (Channel 1) - 2nd: Collision monitoring for universal head (Channel 2) PENDULUM MACHINING WITH 3 WORK ZONES MULTI-AXIS INTERPOLATION FOR FREEFORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For universal head, arranged on clamping plate Storage positions: 10 Max. tool weight: 12.5 kg Max. tool length: 200 mm Max. tool diameter: 63 mm Max. tool diameter with free adjacent position: 250 mm Tool holders: HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Max. tool diameter (full magazine): 125 mm Max. tool diameter (free adjacent positions): 250 mm Max. tool length: 500 mm Max. tool weight: 25 kg Max. tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 UNIVERSAL HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC UNIVERSAL HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated HF spindle - Tool holder: HSK-A 63 (DIN 69893) - Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle - Speed range: up to 20,000 rpm - Spindle bearings with permanent grease lubrication - Air seal - Torque: 40 Nm at 100% duty, 50 Nm at 40% duty - Automatic tool clamping - Power transmission as per speed-power diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast iron construction (GGG 60) - Milling head, automatically swiveling, 180 x 1 degree - All resulting positions programmable and executable via CNC - Repeat accuracy at spindle nose ±0.002 mm, indexing accuracy ±3 arcsec - Tool holder: HSK 100-A - Milling spindle with hydromechanical quick-change system - Tool pull-in force: 45 kN - Internal coolant supply, Form A-D - External coolant supply via shower ring - Speed range: 22 – 4,000 rpm MAIN DRIVE By a frequency-controlled, liquid-cooled AC motor with: 32 kW output at 100% duty cycle, 46 kW at 40% duty cycle. Direct drive without gear, for zero heat build-up or gear wear. Torque: 637 Nm at 100% duty, 875 Nm at 40% duty.

Stanje: rabljeno, Technical Details: X-axis: 120 mm Z-axis: 610 mm Diameter: - mm Y-axis measuring range (height): 0 - 610 mm Ledpfowa A Hmox Adkjhd Weight: 19 kg Interface: 2x RS-232C, 2x USB-A/B Overall height: 950 mm Measuring system resolution: 0.0001 mm Power consumption: 43 watts Space requirements (W x D x H): 320 x 330 x 950 mm TWO-COORDINATE HEIGHT GAUGE Equipped with two probe holders: 0-872 mm Manual adjustment speed Air bearing support Interfaces: 2x RS232C and 2x USB (A+B) Reference gauge 25 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Lhsdpfxjylw Stj Adkod • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40