Težka prikolica

Stapler Center Fritz GmbH TPW 30 AL - AS - PA

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Fodpfx Afeh S Nxpjloft Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer featuring: - Double turntable steering Ffodpfx Afsfrzvljlot - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Ffjdjia Rtdspfx Aflst Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: Fedpfx Ajhzbipsfleft 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Ffjdpfx Afed Hxx Ajlst Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: Fedpfx Aex Aq E Hefleft Premer čelne plošče: 1600 mm Skupna potrebna moč: 80 kW Teža stroja pribl.: 25 t Potrebni prostor pribl.: 4,4 x 4,62 m Premer obdelovanca - maks.: 2000 mm Največji premer pri čelnem struženju: 1800 mm Vpenjanje orodja: ISO50 Stroj je bil redno vzdrževan in je v tehnično dobrem stanju. Z osjo C.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 470 mm, pomik po osi Z: 876 mm, moč vretenovega motorja: 30.000 W, največja hitrost vretena: 1.250 obr/min, hitro pomikanje X-os: 24.000 m/min, hitri pomik os Y: 24.000 m/min, premer struženja: 1.000 mm, skupna dolžina: 2.375 mm, skupna višina: 3.659 mm, skupna širina: 4.558 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 3.655 Nm, vhodna napetost: 400 V, skupna masa: 14.000 kg, Oprema: hladilna enota, CNC vertikalni stružnica MAZAK Mega Turn 900 TEHNIČNE ZNAČILNOSTI: CNC krmiljenje: MAZATROL SmoothG Maks. premer struženja: 920 [mm] Maks. premer obdelave: 1000 [mm] Hod X osi: 470 [mm] Hod Z osi: 876 [mm] Hitrost hitrega pomika X osi: 24000 [mm/min] Hitrost hitrega pomika Y osi: 24000 [mm/min] Vreteno – povezava: A2-15 Maks. hitrost vretena: 1250 [vrt/min] Moč vretena: 30 [kW] Navor vretena: 3655 [Nm] Min. razdalja od čela vretena do čela revolverja: 154 [mm] Maks. teža obdelovanca: 3000 [kg] Maks. razdalja od čela vretena do čela revolverja: 1030 [mm] Število orodnih postaj: 12 Fedpfx Afew T Tmpsloft Čas indeksacije revolverja: 0,4 [s/pozicija] Kapaciteta rezervoarja za mazanje: 516 [l] Skupna potrebna moč: 58,9 [kVA] Napajalna napetost: 400 [V] Dimenzije: 2375 × 4558 × 3659 [mm] Teža: 14000 [kg] Dodatne informacije na zahtevo.

Leto izdelave: 2026, Stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Fodpfx Aecqvhxsfleft Immediately available Location: Ex-stock 54634 Bitburg

Leto izdelave: 1985, Stanje: rabljeno, Rabljen HUGH SMITH 1000-tonski hidravlični stiskalnik s 4 stebri, s premikom navzdol, naprodaj. Obratovalne hitrosti: 50 mm/sek. Gravitacijski približek: 6 mm/sek. Stiskanje: 50 mm/sek. Povratek. Ffjdpfjf A R Uzjx Aflet Delovna višina: 1060 mm. Teža stiskalnika: skupno 102 t. Towler Hydraulics. Stroj je bil izvorno zasnovan za premik navzgor (glej priložene originalne načrte), leta 1985 je bil predelan na premik navzdol in obnovljen (glej posodobljene načrte) z novo elektro opremo. Na voljo povsem novi hidravlični stiskalniki tipa C, H in D – lahko vam pripravimo konkurenčno ponudbo, izdelano po vaših specifikacijah. Novi 1000-tonski hidravlični stiskalniki so na voljo po naročilu.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wood chipper, sawmill offcut chipper LINDNER type T 400/140-2 Ffjdpfx Aor Ak Rgsflet – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: - Infeed width: 400 mm - Infeed height: 140 mm - Rotor diameter: 450 mm - Rotor length: 400 mm - Main drive motor power: 33 kW - Feed drive motor power: 2 x 1.5 kW - Number of knives: 2 pcs - Sieve dimensions: 60 mm x 90 mm - Feed rollers in very good condition - Feeder drive motor power: 1.5 kW - Feeder length: 4,200 mm - Transport dimensions (L/W/H): 430 / 240 / 150 cm - Weight: approx. 2,000 kg