Jeklenica za vitlo 1,6 t

Stahl Ø 12 mm 40 m

Stanje: dober (rabljeno), Večnamenski vitle, prijemni vitle, dvižni vitle, montažni vitle, jekleni vlečni vitle, univerzalni jekleni vitle, naprava za vleko z jeklenico, jeklenica za vitel - Jeklenica: za večnamenski vitel - Premer jeklenice: 12 mm - Dolžina: 40 m - Dimenzije za transport: 560/220/V500 mm Psdpfxsxbx N De Agxjgk - Teža: 21,2 kg

Stanje: dober (rabljeno), Tailstock Quill size: MT 2 Quill stroke: 30 mm Height adjustable Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Pedpfx Asdlp Txogxjgk Base dimensions: 230 x 155 mm Weight: 27 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, premer gredi: 50 mm, premer valja: 155 mm, skupna masa: 400 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, nujno zaustavitev, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Pedowt Sy Ajpfx Agxjgk Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Maximum diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Pgsdpfxoymznhe Agxek For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Pgodpfow T Tcwox Agxek Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, premer struženja nad prečnim suportom: 300 mm, izvrtina vretena: 51 mm, premer struženja: 575 mm, širina na sredini: 2.000 mm, največja hitrost vretena: 1.600 obr/min, skupna masa: 2.200 kg, kapaciteta 2000x575 mm premer 300 mm na prečnem suportu Pgjdpfeyar Apsx Agxok premer vretena 51 mm zunanja električna omara teža 2200 kg

Stanje: rabljeno, Leto izdelave: 2005, AMADA - HFT 80-25 - 2005 - Zmogljivost 80 t Pgjdoytrwtjpfx Agxek - Miza 2500 mm - Hod 200 mm - Teža 5750 kg - Pod napajanjem - Rabljeni stroj, dobro ohranjen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1,500 kg Customs tariff number: 8458.11 20 Dimensions: 1650 x 1050 x 1850 mm TECHNICAL SPECIFICATIONS (standard version) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: ø 10 mm Maximum part length, depending on collet type: 60/90 mm Programmable spindle speed: 0–16,000 rpm Positioned and indexed stop, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of cross drilling/milling tools: 4 Programmable rotation speed: 0–12,000 rpm Front working device (X3/Y3) Maximum number of front tools: 3 Programmable rotation speed: 0–12,000 rpm Sub-spindle and secondary operations (X4/Z4) (+C optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0–16,000 rpm Positioned and indexed stop; increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or live spindles: 4 Maximum spindle rotation speed: 9,000 rpm Tornos-Bechler/Fanuc dedicated CNC Type of processor: 486 DX2 Number of simultaneous axes: 10 Pgedsw T Tfrepfx Agxjk Machine versions: 9 axes + C axis on main spindle and/or C axis on sub-spindle All technical data provided without guarantee of accuracy or completeness.

Stanje: zelo dobro (rabljeno), Konvencionalni stružnica Inv. št.: 3506 Ayel-Tech Tip BT 400 * Dolžina struženja: 1000 mm * Premer struženja: 400 mm * Vretenina izvrtina: 52 mm !!! * Hitrost vretena: 70 - 2000 obr./min * 3-osni digitalni prikaz SINO * Nožna zavora * Hladilna naprava * Strojna svetilka * Zaščitni pokrov * Fiksna luneta * Sledi luneta * Trizelčne glave Psdpexp Idgjfx Agxegk * Štirizelčne glave * Nujna ustavitev * Menjalna kolesa * Zadnja stena za ostružke * Dokumentacija * 400V

Stanje: dober (rabljeno), Leto izdelave: 1957, Ref.-št.: 10573 Proizvajalec: VDF Tip: W 40 Leto izdelave: 1957 Vrsta krmiljenja: Konvencionalno Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 030XXXX Premer struženja: Ø 960 mm Pgjdpfxsxmd Upe Agxjk Dolžina struženja: 4500 mm Vrtljaji vretena: Ø 105 min⁻¹ Premer struženja čez prečni suport: Ø 600 mm Dodatne informacije: Stroj je možno po dogovoru videti pod napetostjo.