Jeklenica za vitel 1,6 t

Stahl Ø 11 mm 20 m

Stanje: dober (rabljeno), Večnamenski vitel, prijemni vitel, dvižni vitel, montažni vitel, žični vitel, univerzalni žični vitel, naprava za žični vitel, jeklenica za žični vitel -Jeklenica: za večnamenski žični vitel -Premer žice: 11 mm Cgjdpfx Asxbyaqohxet -Dolžina: 20 m -Transportne mere: 360/90/H400 mm -Teža: 12,4 kg

Stanje: rabljeno, Gearbox, bevel gearbox, worm gearbox - Gearbox: Worm gearbox, gear ratio: i = 1:30 - Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm Csdpfet Snwxex Ahxjgt - Dimensions: 150/145/H175 mm - Weight: 5.1 kg

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Cgjdpfovc Awxsx Ahxjt Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right Cgjdoupxupopfx Ahxjt • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: dober (rabljeno), Robland thickness planer-jointer 3 Tersa knives 1 feed speed for thickness planing Maximum thicknessing height: 230 mm Noise-reducing combs in the table Cgjdpfsvyhmgsx Ahxjt Table length: 140 cm Machine in good working condition, ready for operation

Stanje: dober (rabljeno), Tires, Tractor Tires, Soil Cultivation, Seed Drill Codpfx Ahob A Rtrexogt - Quantity: 2 tires - Tire size: 180/90-16 IMP - Dimension: Ø 700 mm - Total price: for 2 tires - Weight: 40 kg each

Stanje: dober (rabljeno), Regulator amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator - Manufacturer: Gefran, power controller, power regulator Cedsubfyhepfx Ahxjgt - Model: GTF-25-480 - Quantity: 5x power controllers available - Price: per unit - Dimensions: 150/60/H135 mm - Weight: 0.9 kg/unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, EMCO VMC 600, Siemens Leto izdelave: 2000 Codpfx Aoxxakwohxsgt

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Cgedpevwfqwofx Ahxet Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, Leto izdelave: 2024, moč: 1,2 kW (1,63 KM), SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG CAPACITY 5M LIFT HEIGHT RR15HH450E FREE LIFT Powerful professional-grade equipment with a lifting capacity of up to 1500 kg ✅ Reaches a lift height of 5m ✅ Free lift: mast only extends above the height of the lift frame – ideal for low ceiling heights ✅ Robust triplex mast & heavy-duty chassis ✅ Charger included ✅ Including powerful 24V 200Ah lead-acid batteries ✅ Digital battery charge indicator & hour meter ✅ Small turning radius of only 1575mm – ideal for narrow workspaces FEATURES / EQUIPMENT Robust and high-quality design Thanks to its sturdy and stable construction, the high-lift stacker ensures excellent stability and durability. With a lifting capacity of 1500kg, this stacker is a true powerhouse, offering the strength needed to effortlessly raise heavy loads up to 5 meters. Free lift function: Thanks to its free lift capability, this high-lift stacker is particularly well-suited for warehouses and areas with limited ceiling and entry heights. The triplex mast extends only above the lift frame height (1570mm), enabling safe and effective operation in confined spaces. Combined with a 5m lift height, it is a true all-rounder. Charger included: The built-in 24V lead-acid battery with a capacity of 200Ah ensures long operating times. To recharge the electric stacker, simply connect it to a standard 230V power outlet using the included charger. Easy handling: The stacker is easy to operate and features high-quality, waterproof controls, making it suitable for temporary use in damp or cool environments. All control instruments such as the battery charge indicator, emergency stop, and ignition key are centrally positioned for direct visibility by the operator. Thanks to its small turning radius of just 1575 mm, the electric high-lift stacker is exceptionally agile and versatile. Multiple drive modes: Thanks to its various drive programs, the SCHORR high-lift stacker is extremely flexible and can be perfectly adapted to user needs. In addition to the standard transport speed of approx. 5.8 km/h, it features a "creep mode" allowing slow and precise movements for maneuvering through narrow aisles and racking. Technical Specifications Manufacturer (short designation): SCHORR Cgodpfxsqwdltj Ahxot Manufacturer type code: RR15HHE Free Lift Lifting capacity: 1.5t Model: 500E Own weight including batteries: 1155kg Drive: Electric Tyres: Polyurethane Basic Dimensions Overall length: 1975mm Overall width: 820mm Length including fork back: 905mm Lift: 5000mm Free lift: 1740mm Mast height retracted: 2214mm Mast height extended: 5510mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outside distance: 570mm Aisle width with pallet: 800x1200 lengthwise 2450mm Turning radius: 1575mm Speed Travel speed with/without load: 5.8km/h / 6.0km/h Lift speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. climbing ability with/without load: 6% / 15% Would you prefer to finance or lease the equipment? No problem! We also offer attractive options in this area. Just contact us and we’ll happy to advise you on the various possibilities. We look forward to your inquiry!