SPINNER MVC 1600-N

SPINNER MVC 1600-N

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Csdpfxsuyk N Is Ahxsrb

Stanje: dober (rabljeno), Leto izdelave: 2007, Rabljeni stružni stroj OKUMA - Model: LT200-M TwinStar - Letnik: 2007 - vključuje transporter za ostružke Crjdpfxsv S Svvj Ahxjb - posoda za hladilno tekočino - takoj na voljo

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Csdpevwgpbjfx Ahxerb Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder - Assorted tool holders

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Werkzeugvermessung auf dem Tisch wird geliefert, Die von Hand gezeigten Teile werden nicht mitgeliefert. Cjdpfjr Urm Ssx Ahxerb

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter / mm Saw band length / mm Cutting width / mm KASTO tec AC5 band saw automatic machine Sawing capacity: 23 kW Machine weight: 5.9 t Year of manufacture: 2002 Cutting ranges in mm (approx.): Round: 530 mm Square: 530 x 530 mm Flat: 530 x 630 mm Smallest workpiece to be cut: 10 x 10 mm Minimum cutting length: 6 mm Minimum remnant length single cut: 10 mm Minimum remnant length automatic operation: 35 mm Automatic material feed single max. (standard): 600 mm Automatic material feed single max. (option): 1500/3000 mm Material feed multiple: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12–120 m/min (infinitely variable) Cutting feed: infinitely adjustable Material feed: with ball screw spindle Automatic feed: with horizontal clamping vise Material clamping: hydraulic, infinitely adjustable Clamping force Main machine vise: 200–1000 daN Feed vise: 200–2000 daN Saw band tension: hydraulic, factory set Saw band cleaning: by easily replaceable double brushes, hydraulically driven Coolant tank volume: approx. 185 l Cedpfxsxrg E Io Ahxjrb Pump capacity: approx. 25 liters/min Upon request, we can also offer you the 4 immediately available saw bands at an additional cost.

Stanje: zelo dobro (rabljeno), various steadies Cjdpfxed E Tb Eo Ahxsrb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 35.044 h, največja hitrost vretena: 10.000 obr/min, skupna višina: 3.000 mm, skupna širina: 2.500 mm, skupna masa: 11.000 kg, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, moč vretenovega motorja: 16.800 W, največja dolžina izdelka: 2.500 mm, obremenitev mize: 500 kg, teža orodja: 8.000 g, število mest v zalogovniku orodij: 82, število osi: 3, This 5-axis universal machining center, HERMLE C40U Dynamic, was manufactured in 2011. It offers a travel distance of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis. The machine features a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 38 positions, plus an additional 43 positions. If you are seeking high-quality machining capabilities, consider the HERMLE C40U Dynamic, which we are offering for sale. Please contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tools/Magazine: • Number of magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll coolant system • Renishaw OMP 40 touch probe • ICS (internal spindle coolant) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage: 400 V/3~ • Mains frequency: 50 Hz • Control voltage: 24 V- • Total rated current: 60 A • Total power: 41 kVA Additional Equipment Crsdpfey Al Ufjx Ahxob • OPTIONAL at extra cost: Tool package available: approx. 530 tools • OPTIONAL at extra cost: Zero-point clamping system The machine was serviced by HERMLE in 2025. In August 2025, the spindle head was replaced and the geometry was rechecked and readjusted by a HERMLE technician. Technical Specification Taper Size SK 40

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Cjdpfx Ahst Hw H Eoxjrb Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), X-os: 750mm, Y-os: 600mm, Z-os: 520mm, C-os: 360°, B-os: 180°, največje število vrtljajev vretena: 18.000/min, krmilje: Siemens SINUMERIK 840D powerline, priključna moč: 55kVA, dolžina: 4603mm, širina: 5250mm, višina: 2785mm, teža: cca 9t, obratovalne ure (skupni vklopi): cca 65.000h, vreteno ure: cca 19.000h. Znane napake ni, interno vzdrževano, brez poročil o vzdrževanju, z dokumentacijo, rotacijska miza, visokotlačno notranje hlajenje in merilna sonda vretena Bluhm. Ogled na lokaciji je možen. Crsdpfsylbq Hox Ahxjb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 12.244 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 230 mm, pomik po osi Z: 740 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.620 mm, skupna masa: 4.200 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SolutionLine, število osi: 2, This 2-axis horizontal lathe SPINNER TC 600-65MC was manufactured in 2015 and is equipped with a Siemens 840D control system and a 16-position tool turret. It features a main spindle with speeds up to 4,000 rpm and an output of 24 kW. The machine offers a swing over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to purchase this horizontal lathe SPINNER TC 600-65MC. Please contact us for further information regarding this machine. Additional Equipment • Full splash guard enclosure + coolant system • Work area lighting + pneumatic equipment • Panoramic window for optimal view of the work area Machine Advantages Technical Machine Advantages Cedex D E Hnepfx Ahxerb • Axis distance: approx. 600 mm • Maximum turning diameter: 310 mm • Torque: main spindle (Fanuc, S6 40%) 178 Nm, main spindle (Siemens, S6 40%) 301 Nm • Quill stroke: 120 mm • Travel: 475 mm • Rotating tools speed: 6,000 rpm • Driven tool power: (Fanuc, 30 min) 3.7 kW, (Siemens, 40%) 6.0 kW Additional Information Media Pneumatics max. operating pressure: 10 bar Nominal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Control system: Standard Siemens 840D, option Fanuc 21i Operating voltage: 400 V Network frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feeder (electric)