Stroj za elektroerozivno grezanje Die-Sinking EDM

Sodick AD 55 L

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Pjdpfx Asxgnz Toczjpl Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Ppedpfx Asw Ucyueczel Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Zunanje mere: Višina: 5650 mm Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Širina: 2.780 mm Globina: 2.312 mm Mere zabojnika: Višina: 55 mm Ppodpfxsxmgwas Aczol Širina: 2450 mm Globina: 864 mm Nosilnost police: 270 kg na predal Število polic: Število na željo stranke. Skupna nosilnost: 2 x 33.150 kg Število izvzemov: 1 Barva: modra Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Prodaja izključno v DACH-države (Nemčija, Avstrija, Švica) in Beneluks (Nizozemska, Belgija, Luksemburg). Obveščamo vas, da trenutno prodajamo ali dostavljamo samo v D-A-CH in Be-Ne-Lux države. Prosimo za vaše razumevanje.

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Pedpfx Aow Ew T Seczopl Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: zelo dobro (rabljeno), Hello, We are offering used Erowa PalletSetW vices. Ppedpjitcq Tefx Aczjl All items have been cleaned and tested by us. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm Additionally, a full functionality check was performed. These vices show minor signs of use, but are in very good technical condition. Single unit purchase is also possible. Spare parts are available as well. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvo-vreteno stružno-rezkalni center Mazak. Hod X/Y/Z: 580mm/160mm/1545mm, os B: 225°, os C: 360°, razdalja med konicama: 1500mm, maks. premer struženja: 660mm, premer nad ležiščem: 660mm, hitrost glavnega vretena/protivretena: 5000obr/min, število orodij: 40+9, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: cca 5200mm/2550mm/2600mm, teža: cca 14000kg, ure vretena: 24679h. Vključuje visokotlačno hlajenje, SMW luneto, SMW vpenjalno glavo, integracijo lunete, Renishaw sondo, merilno sondo, CAD/CAM programsko opremo Topsolid 7.18, oljni separator, postprocesor in Inspection-Plus paket. Stroj je bil večinoma uporabljen za fino obdelavo. Dokumentacija je na voljo. Ogled na lokaciji mogoč. Ppjdpfx Acex Ih Dgjzel

Stanje: zelo dobro (rabljeno), HERMLE C 42 U je 2 x 5-osni center z nakladalnim robotom, zasnovan za visoko natančnost in zanesljivost. Miza 400×400 mm, 450 kg, hodi X800 Y800 Z550 mm, os A ±130°. Vreteno HSK‑A63 0–18.000 vrt./min, 42 kW, 148 Nm; hitri pomiki 45/45/40 m/min. Magazin 42+160, 54 palet, robot KUKA, IKZ 80 bar, Renishaw/BLUM. Uporaba: avtomobilska industrija, letalstvo, urarstvo, medicinska tehnologija. Ppjdpfjx S I Akox Aczjl

Stanje: rabljeno, Leto izdelave: 2019, Žična erozijska stroj Proizvajalec: Mitsubishi Electric Tip: MV1200S NewGen Leto izdelave: 2019 Obratovalne ure: cca 9.500 Krmiljenje: M800 D-CUBES Mitsubishi Electric krmiljenje Hibridna konstrukcija Pomiki: X/Y/Z: 400 x 300 x 220 mm Pomiki U V: 120 x 120 mm Maks. dimenzije obdelovanca: 810 x 700 x 215 mm Maks. teža obdelovanca: 500 kg ODS-Optical Drive System Cevni direktni pogoni v oseh XY Linearni merilni letev v osi XY Intelligent AT – avtomatsko vdevanje žice Za premer žice 0,10 – 0,3 mm Avtomatska funkcija iskanja finih lukenj 5 krmiljenih osi – pripravljeno za dodatne osi PFC – Precise Finish Circuit LLS-Long Life System Ppsdpfx Aexpfy Sjczsl 10 kg postaja za žico Blok za poravnavo žice Rezalnik žice Kompresorski hladilnik ä21126

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Razdalja med vreteni 800 mm, Y-os (+/-105 mm), C-os 0,001 stopinje, B-os -30/+210 stopinj, glavna hitrost vretena 5.000 min⁻¹, hitrost sekundarnega vretena 6.000 min⁻¹, Psdpfx Acew Nwfbjzepl hitrost rezkanja 12.000 min⁻¹, kapaciteta palice 65 mm, ATC s 38 mesti, moč vretena 22/18,5 kW, krmilje Siemens 840D, merilec orodja, hlajenje skozi vreteno, magazinski podajalnik palic, robotski nakladalnik.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Podpfx Asubyv Reczjpl Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications