Linija za proizvodnjo cevi
SIRIO ZIEH ÖL STATION

Name: SIRIO ZIEH ÖL STATION
Brand: SIRIO
Availability: InStock

Leto izdelave

2018

Stanje

Rabljeno

Lokacija

Niederhelfenschwil Švica

Linija za proizvodnjo cevi SIRIO ZIEH ÖL STATION

Prikaži karto

Podatki o stroju

Opis stroja:: Linija za proizvodnjo cevi

Proizvajalec:: SIRIO

Model:: ZIEH ÖL STATION

Leto izdelave:: 2018

Stanje:: rabljeno

Cena in lokacija

Lokacija prodajalca:: Reckholder 1, 9527 Niederhelfenschwil, Švica

Klic

Tehnične podrobnosti

Proizvajalec krmilnikov:: SIEMENS

Model krmilnika:: 15 13F-1 PN

Podrobnosti ponudbe

ID ponudbe:: A20521615

Št. reference:: 54746

Nazadnje posodobljeno:: dne 13.11.2025

Opis

CONTROL SYSTEM
.. SIEMENS 15 13F-1 PN

1. General Description
The draw oil preparation unit is designed for the optimal treatment of unfinished tubes prior to the drawing process. A large-volume draw oil bath ensures homogeneous wetting of the tube surface. This provides uniform lubrication, reduces friction during drawing, improves tube surface quality, and extends tool life.
A constant material flow, as well as stable bath temperature and quality, make this unit a central process step in efficient tube manufacturing.
_____
2. Performance Data & Capacities
• Bundle weight: max. 5 t
• Max. tube length: 9 m
• Immersion bath volume: 20 m³
• Power supply: 400 V / 180 A / 50 Hz
• Operating mode: Semi-automatic
_____
3. Function Principle
Immersion Bath & Medium Preparation
• Uniform lubrication via complete wetting in the draw oil bath
• Tubes installed within the tank walls provide oil heating via the heat recovery unit of the furnace
• Circulation of the reactive oil: Chemetall process, 12 cycles per hour
• Prevention of water pockets: Precise water dosing; compressed air injection as required
• Bath monitoring: Regular sample collection
• Dosing station: Automatic replenishment (oil/water)
_____
4. Measurement & Control Parameters
The following process parameters can be recorded and controlled:
• Immersion time
• Drip-off time & dwell time at 3 drip-off stations
• Crane tilt angle during immersion
• X and Y axis positions
• Crane travel speeds
• Cycle types: Mix, Active/Inactive, Automatic, Pause, Interruption
_____
5. Control & Safety
• Siemens control: CPU 1513F-1 PN
• Software: TIA Portal V15.1
• Visualization: Siemens TP1200 Comfort Panel
• Safety concept: Risk assessment available
• Control cabinet & complete documentation including electrical & control schematics and software backup
_____
6. Automatic Travelling Crane
• Type: Matr. 2981 t.6.5
• Translation speed: max. 40 m/min
Kdjdpfx Agsxwkytokjw
• Class: A6 (FEM 1.001 – ISO)
• Wheels: 4 pcs., Ø 315 mm
• Track gauge: 13,000 mm
• Dead weight: 8,000 kg
• Motor: FC90LFECCL-4, 1.5 kW, IP55
• Brake: Disc brake, DC 400 V
• Gearbox: TP 315/90BR, i = 1/35
_____
7. Scope of Supply
• Loading carriage
• Immersion tank
• Circulation pump
• Portal crane / automatic travelling crane
• Drip-off station
• Unloading carriage
• Extraction system
• Dosing station
• Control cabinet & operator panel
_____
8. Documentation
• Operating manual
• User manual
• Electrical & control circuit diagrams
• Declaration of conformity
• Software backup

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2004

61 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+41 71 54... oglasi

+41 71 94... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Stroj za luknjanje in grizljanje Euromac MTX Flex 12 1500/22/ 2500 *Official Euromac Service Partner*

Aalten

888 km

Stroj za luknjanje in grizljanje
EuromacMTX Flex 12 1500/22/ 2500 *Official Euromac Service Partner*

Klic

Stanje: dober (rabljeno), Leto izdelave: 2012, • Euromac MTX Flex 12 1500/22/2500 • Extensive tooling package included. • Year of manufacture: 2012 • Multitool 6 • Multitool 10 • CE safety features • Table extensions up to 4 meters • Vacuum system • X-axis 2500 mm with repositioning up to 10,000 mm • Y-axis 1500 mm MTX Flex 12 features: • 3 auto-index stations, Type D – 360° programmable • 3 fixed stations, Type D Kedpfx Aswk Ntuogkodw • 6 fixed stations, Type B with ACTIVE Die System • Direct DRIVE system • Automatic repositioning of hydraulic sheet clamps • Standard 2 sheet clamps • Easy sheet loading system • Automatic lubrication of multitool and tool holders • Moveable operator console • Machine software: TPT (TOP PUNCH TOUCH) with 21.5” LED touchscreen • Table with brushes • Front folding table (L 850) • External cooling system • UPS system: protects the console PC from voltage dips and ensures up to 30 minutes power supply in case of power outage • Die holders: 2x D, 1x C, 2x and 1x B to A adapter • Punch adapters: D/B, D/C, B/A • Operating instructions (hard copy and digital) • Prepared for online service (internet connection required) • USB memory stick • Electrical preparation for loading and unloading system.

Poglej podrobnosti

mali oglas

Stroji za upogibanje valjev BIKO B3 3128

Jánoshida

410 km

Stroji za upogibanje valjev
BIKOB3 3128

Klic

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, številka stroja/vozila: 08063406 3441, premer spodnjega valja: 265 mm, premer zgornjega valja: 285 mm, dolžina valja: 3.100 mm, najv. debelina jeklene pločevine: 15 mm, skupna masa: 8.000 kg, skupna dolžina: 5.300 mm, skupna širina: 1.200 mm, skupna višina: 1.700 mm, moč: 14,71 kW (20,00 KM), vrsta vhodnega toka: trifazni, Oprema: nujno zaustavitev, Valjčni stroj naprodaj od zasebnika. Kodjvl H Rbspfx Agkjdw Kapaciteta valjanja 5xD = 15 Kapaciteta predupogibanja 5xD = 12 Kapaciteta predupogibanja 1,3xD = 9

Poglej podrobnosti

mali oglas

CNC stiskalnica za udarce TRUMPF Trumatic 5000 R

Slovaška

452 km

CNC stiskalnica za udarce
TRUMPFTrumatic 5000 R

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 24.628 h, Splošni podatki Teža stroja: 17500 kg Krmilna enota Model: WIN NT Znamka: TRUMPF Glavni pogon Prebijalna sila: 220 kN Pomik Pomik po osi X: 3125 mm Pomik po osi Y: 1650 mm Kdjdpfx Agow Nb D Ujkow Ta prebijalni stroj Trumpf Trumatic 5000 R je bil izdelan leta 2003 in ima 24.628 delovnih ur. Opremljen je s krmilno enoto Trumpf WIN NT. Stroj ima prebijalno silo 220 kN. Vrste uporabe Prebijanje

Poglej podrobnosti

mali oglas

Hidr. štirivaljni stroj za okroglo krivljenje SERGI 3100 x 12/10 mm

Kreuztal

742 km

Hidr. štirivaljni stroj za okroglo krivljenje
SERGI3100 x 12/10 mm

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Technical Specifications: Working width: 3100 mm Max. bending capacity (mild steel St40): 12.0 mm Max. prebending (mild steel St40): 10.0 mm Top roll diameter: 270 mm Side lower roll diameter: 270 mm Central lower roll diameter: 250 mm Cone bending device Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 11 kW Dimensions (length x width x height): approx. 4600 x 1500 x 1500 mm Own weight: approx. 10 tons Accessories: Ksdpfovy H Hxex Agkjdw Top bending aid Lateral bending aids The seller accepts no liability for typing or data transmission errors. The machine is in a condition appropriate to its age with respect to appearance, technology, and wear; used machines are sold without any warranty.

Poglej podrobnosti

mali oglas

Linija za rezanje tuljav Servosteel Machinery

Turčija

1.280 km

Linija za rezanje tuljav
Servosteel Machinery

Klic

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, teža tuljave: 15.000 kg, najv. debelina jeklene pločevine: 4 mm, zunanji premer: 1.600 mm, širina tuljave: 1.600 mm, vrsta vhodnega toka: Klimatska naprava, Coil Slitting Line se uporablja za rezanje širših kolutov v ožje trakove, skladno z želenimi dimenzijami. Podjetje Servo Steel nudi cenovno učinkovite linije za vzdolžno rezanje kolutov, po meri in značilnostih glede na zahteve kupca. Kedpsvmgn Nsfx Agkjdw Vse komponente linije za rezanje kolutov so v celoti izdelane v naši proizvodnji, od začetka do konca. Začenši z odvijalcem (decoiler/uncoiler), ravnalcem in vozičkom za nakladanje kolutov, do servo podajalnika, rezalne enote in previjalca – vse je mogoče nadzorovati iz ene točke. Sistem je upravljan s pomočjo PLC krmiljenja, ki je programiran v jeziku kupca.

Poglej podrobnosti

mali oglas

Stroj za upogibanje pločevine - 3 valji METALLKRAFT RBM 1550-40 E Pro

Nemčija

650 km

Stroj za upogibanje pločevine - 3 valji
METALLKRAFTRBM 1550-40 E Pro

Klic

Stanje: rabljeno, Leto izdelave: 2022, Sheet width: 1550 mm Ksdpfjt Hmlqsx Agkedw Sheet thickness: 4 mm Bending operation: 6 Total power requirement: 2.2 kVA Approx. machine weight: 1.42 t Approx. space requirement: 2.7 x 0.75 x 1 m Rolling feed: 3.5 m/min Motorized 3-roll bending machine Working width: 1550 mm Material thickness up to 4 mm Roll diameter: 140 mm Rolling speed: 3.5 m/min Heavy-duty welded steel construction Powered top and pinch rolls Swiveling top roll Manual adjustment of the pinch and side rolls Roll drive via powerful electric motor and gearbox Wire grooves on pinch roll Safety device: emergency stop rope With mobile control console and foot pedal Features: Swiveling top roll Control panel with digital display and manual operation (option) RBM 2050-30 E PRO with optional motorized side roll adjustment and digital side roll position display Maximum bending capacity (steel 400 N/mm²): 4.0 mm Maximum cone bending capacity (steel 400 N/mm²): 2.0 mm Maximum bending capacity (stainless steel): 3.0 mm Maximum cone bending capacity (stainless steel): 1.5 mm Maximum bending capacity (aluminum): 4.8 mm Maximum cone bending capacity (aluminum): 2.4 mm Smallest bending diameter: 210 mm Rolling speed: 3.5 m/min

Poglej podrobnosti

mali oglas

Stroj za okroglo upogibanje DAVI MCA 3020

Sankt Daniel

159 km

Stroj za okroglo upogibanje
DAVIMCA 3020

Klic

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, premer zgornjega valja: 200 mm, premer stranskega valja: 150 mm, najv. debelina pločevine: 6 mm, delovna dolžina: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Kjdpfx Aeuzm Ayogkjdw Top roll diameter 200 mm Side roll diameter 150 mm Hydraulic drop-end

Poglej podrobnosti

mali oglas

Stroj za okroglo upogibanje Faccin HAV 1534

Sprockhövel

812 km

Stroj za okroglo upogibanje
FaccinHAV 1534

Klic

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Kdjdpfxot Akt Rj Agkjw Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Poglej podrobnosti

mali oglas

Stroj za izsekovanje TRUMPF TruPunch 3000

Brno-město

358 km

Stroj za izsekovanje
TRUMPFTruPunch 3000

Klic

mali oglas

Linija za proizvodnjo solarnih "C" profilov Servosteel Machinery

Turčija

1.280 km

Linija za proizvodnjo solarnih "C" profilov
Servosteel Machinery

Klic

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, najv. debelina jeklene pločevine: 4 mm, delovna širina: 1.600 mm, teža tuljave: 15.000 kg, Rollformmaschinen sind dafür konzipiert, Blech in gerade, geformte Profile zu verarbeiten. Beim Rollformverfahren wird ein kontinuierliches, flaches Blech durch eine Serie von gehärteten Stahlwalzen geführt, die das Material in mehreren Stationen Schritt für Schritt in die gewünschte Endform bringen. Wir liefern komplette Rollformanlagen zur Herstellung sämtlicher Stahlprofile für Solarpanels, einschließlich der Halterungswinkel. Die Profildimensionen variieren je nach Größe der Solarpanels. Unsere Rollformlinie ist äußerst flexibel und in der Lage, alle Profilgrößen ohne mechanische Umrüstungen zu fertigen. Kedpfx Ageu D Hv Sekjdw Sämtliche Komponenten der Rollformlinie werden vollständig in unserem Werk produziert – vom Abwickler und Richtapparat über den Coil-Ladewagen bis hin zum Servozuführer, der Presse, der Rollformmaschine, der fliegenden Schere sowie der Stapelvorrichtung. Die Linie lässt sich zentral über eine kundensprachig eingerichtete SPS-Steuerung bedienen.

Poglej podrobnosti

Oglašujte tukaj