Vilice viličarja - električni

SICHELSCHMIDT FGEX

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Ncodoudxchspfx Abbol Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: novo, moč: 177 kW (240,65 KM), vrsta goriva: dizel, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 6, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Vehicle transporter for carrying up to 3 vehicles. Suitable for passenger cars, vans, or caravans * Truck with superstructure for transporting 1 passenger car, van, or motorhome * Loading area lower deck: approx. 660 x 250 cm * Superstructure hot-dip galvanized * Internal dimensions: 660 x 250 cm Trailer: * BLYSS – Single-axle central axle trailer, max. 9,000 kg GVW * Loading area: approx. 960 x 240 cm * Internal dimensions: approx. 990 x 250 cm * 10 ton BPW axle * ABS * Trailer equipped with perforated running boards * Vehicles can be safely secured in any position according to DIN standards * Trailer hot-dip galvanized Load securing equipment also available from us: * Lashing and tensioning straps * Load locking bars * Safety vests * Transport boxes Nsdpom Tkcisfx Abbjcl * Edge protectors * Air cushions / dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture superstructures of any size for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodyworks – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale, no liability for printing or input errors.

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ncjdpfxocxxx He Abbsl Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, notranja dolžina: 7.400 mm, notranja širina: 1.600 mm, notranja višina: 2.200 mm, Praškasto lakiranje – celotna proizvodna linija za velike dele – vključno s pečjo za žganje 7.400 mm, letnik 2018-2021 Celotna praškasta lakirna naprava za velike dele, sestavljena iz: • PEČ (1): Vismont KWP-440/114 – notranja dolžina 7.400 mm – letnik 2018 • PEČ (2): Libra SLET40-25-20 – letnik 2020 Nodpfx Abexrd A Debecl • PRAŠNA KABINA: Vismont KNP-1500/06 – letnik 2018 • PRALNA NAPRAVA: Libra MR35-21-17 – letnik 2021 • ROČNA PRALNA NAPRAVA: Libra MR42 – letnik 2020 • FILTRIRNI SISTEM: Kemper 390600 – letnik 2016 • ROČNI SISTEM ZA PRAŠKASTO LAKIRANJE: Nordson Encore HD MPS – letnik 2021 • VIJAČNI KOMPRESOR: Kaeser SM 15 – letnik 2013 • OBESNI TRANSPORTNI SISTEM • VILIČAR: Hyundai 30L-7A – letnik 2012 Vse naprave so v obratovanju in popolnoma funkcionalne. Cena: odvisna od tega, ali gre za delni ali celotni nakup.

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Ncodpfxen N Ekce Abbjl Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition

Leto izdelave: 2013, Stanje: novo, Diverse thread rolling tools Manufacturer: Fette See list All tools are new! M12-14x1.5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 UNS T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25 ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 M8x1 T18-17-21.5 1539787 1 11/16-14UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm 80 4 M12x1.25 T18-28-18A 1536879 4 M20x1.5 T27-38-10A 1543914 4 M20x1.5 T27-38-31 1 M30x1 T27-287-24A 2 M6x1 T18-01-18A 1539769 4 M6x1 T18-01-16A 2174668 8 M6x1 T18-01-10A 1536129 2 M6x1 T18-01-21.5 1 1/2-20 UNF C16-180-A10 2406916 3 M20x1 T27-27-31 2174791 5 M20x1 T27-27-31 2179011 2 M16x1 T27-24-13A 1 M10x1 T27-19-12A 2 M18x1.5 T27-37-26A 1556124 2 M10x1 T27-19-28A 1 M20x1.5 T27-38-14A 1543932 3 M20x1.5 T27-38-16A 1543950 1 M12x1.5 T27-32-18A 1543308 3 M18x1 T27-26-14A 2 M12x1.25 T27 3 M16x1.5 T27-35-12A 1543674 4 M12x1.25 T27-191-20A 1543255 3 M16x1.5 T27 31mm 2 M16x1.5 T27 12mm 2 M5x0.8 T18-82-14A 1 M5x0.8 T18-82-21.5 1 M10x0.5 T18 10mm 6 M20x1 T27-27-10A 1 M28x1.5 T27-100-31 2174706 3 M38x1.5 T27 31mm 2 M24x1.5 T27 31mm 5 M12x1 T27 31mm 1 M20x1.5 T27-38-31 1544021 2 M13x1 T27-250-20A 1 M12x1 2 M36x1.5 T27 31mm 3 M10x1 T27-19-28A 1543095 2 Njdpfjbv Tg Hox Abbscl M10x1 T27-19-28A 1543102 1 .. If you need the complete list in a formatted table or as a CSV, please specify.

Stanje: rabljeno, Mounting: MK 4 Nodeb N Ezrepfx Abbjcl

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Spindle taper: MK 3 - short quill Distance spindle nose - table: 545 mm (short quill) Distance spindle adapter - table: 395 mm (with MK adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator - Intermediate stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Rotating drill table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) Nodpfxeharwve Abbocl - Work area lighting Space requirement (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Stanje: zelo dobro (rabljeno), various steadies Nedsd E Tb Ejpfx Abbjcl

Stanje: rabljeno, Leto izdelave: 2000, Planing and Moulding Machine Weinig Unimat 23E for four-sided planing and profiling of timber, equipped with a mobile spindle for automatic adjustment and grooved bed (optional without grooved bed) for short and curved workpieces, as well as a long jointer table. Included: Set of grooved bed cutters Nodpfxjwztw Sj Abbocl Optional: Conversion to a conventional smooth table available on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm