Mlin brez sita SG-2427N-CE

SHINI SG2427N-CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. Real, measured, and weighed quantities are continuously compared with setpoint values via a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous automatic optimization. The complete unit includes: - 2 supply hoppers for virgin material or regrind/virgin material - 2 supply hoppers for masterbatch or additives - 2 pneumatically controlled conical dosing heads Nlsdpfowm Ii Tex Alted - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, enabling recipe, regrind and process data management, vibration compensation, and continuous automatic optimization; built-in Ethernet port and standard reporting/printing functions. Technical data: - Average output: 60 kg/h - Main component dosing range: 1–100% - Additive dosing range: 0.5–10% - Power supply: 1/N/PE 230 V 50 Hz - Power consumption: 100 W - Compressed air: 6–8 bar, oil- and water-free - Weight: approx. 60 kg ✅ Piovan material loaders as shown in the photos are included in the offer.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 Nodowbknbjpfx Alteld ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Leto izdelave: 2008, Screw cap GL 18 Closure for medicine bottle GL18 Injection mould with 10 cavities Nledpfjdqbzqjx Alted

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Nedpfx Asg Emvheltsld Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame - Machine frame Nsdpjv Dvllefx Altsld The unit is immediately ready to weld.

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Model: TT-157E Available: 14 units Nlodpeh Hbpwjfx Altod

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Nljdpfx Ajra Rbgoltjd Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feeding opening (W x H): 1,195 x 650 mm Bale size (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Pressable materials: film, mixed paper, cardboard, die cuttings, textiles, Big Bags, EPS HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860 new, ex-display, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H) mm: 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H): 1,213 x 1,824 x 2,987 mm Feed opening: 1,200 x 565 mm Cycle (seconds): 35 Pressing force (T): 54 Power supply: 400 V (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale size (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Pressable materials: film, cardboard Idle cycle time: 25 s

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2198535, skupna masa: 2.409 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 160 kW (217,54 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 160 kW (217,54 KM), nazivna (navidezna) moč: 220 kVA, neprekinjena moč: 160 kW (217,54 KM), neprekinjena (navidezna) moč: 220 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 42,1 l/100 km, poraba goriva (mestna vožnja): 24 l/100 km, poraba goriva (izven mesta): 32,87 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.300 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 200 KVA generator is a reliable and versatile solution for temporary and long-term power requirements in a wide range of environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance with low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it perfect for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for added safety. Nljdpfxewf Nkce Alted With a 600-litre fuel tank, the generator offers an autonomy of up to 14 hours under continuous load. The system operates on diesel, HVO or GTL fuel, providing flexible fuel options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal Power: 220 KVA - Maximum Power: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Generator: Stamford brushless alternator (AVR) - Output: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 metres - Fuel tank: 600 litres - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 KW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound attenuation: The generator is designed with optimised air intakes and special insulation materials to minimise noise. The sound insulation is reinforced with wool of varying thickness to dampen sound across a wide frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant thanks to a coating tested for more than 2000 hours (C5I-H), guaranteeing a long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The design provides a stable and secure relocation without risk of damage. Customisation: The Bredenoord 200 KVA generator is available in various outputs from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to specific requirements and applications. Certifications: - CE certified - Made in Europe Fields of Application: The generator is suitable for various sectors, including construction, industry and other areas where reliable and efficient power supply is required.

Stanje: novo, Leto izdelave: 2026, The ATC plotter series has been designed for professional applications in large industrial plants and factories, used for the production of complex, large-format components. Owing to its special construction, the machine is suited for manufacturing foundry models and yachts, significantly reducing processing times. To meet the demands of heavy-duty machining, ATC machines are equipped with a reinforced frame and more powerful AC servo drives on each axis. The presence of five axes supports the machining of even the most demanding components. Standard equipment for this series includes automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials processed: - wood - wood-based materials (chipboard, MDF, OSB, etc.) - plastics - composites - PVC - non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The machine’s frame is made of steel and cast iron, ensuring high rigidity and resistance to heavy loads associated with machining processes. WORKING AREA: The working area of our machine is 3000 x 6000 [mm]. Z AXIS RANGE AND GANTRY CLEARANCE: Parameters tailored to the client’s individual requirements. DRIVES: The machines are powered by SERVO motors, providing appropriate acceleration and speed in all directions. The X and Y axes feature classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move along linear guide rails. SPINDLE: A powerful, brushless high-end spindle drives the cutting tool. The spindle speed ranges from 6,000 to 24,000 rpm. It is powered by a frequency inverter of higher power than the spindle itself, which prevents speed drops under heavy load. TOOL MAGAZINE: Nlodjiq U Tqepfx Altjd As standard, the machine is fitted with a linear tool magazine with 6 HSK holders. Additional tool magazine positions are available on request. SOFTWARE: The machine comes with dedicated CAD/CAM software, enabling fast and easy design of components, which the software then converts into G-code. Importing ready-made files from other programs is also possible. CONTROL SYSTEM: The machine is operated via a controller equipped with its own processor and RAM, ensuring stable and reliable operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Clamping force: 250 tonnes Year of manufacture: 1987 Nsdpfxofp U Hvj Altjld Shot weight: 470 g Tie bar spacing: 630 x 560 mm