Motor z nastavljivo prestavo 0,55 kW 0,93-5,4 vrt / min

SEW-EURODRIVE R82-62-V01

Stanje: dober (rabljeno), Presskracht 110 ton Buiglengte 3100 mm Bouwjaar 1990 + retrofit Njdpfx Ajw Hx Rzefmocu Staanderbreedte 2600 mm Gesteunde assen Y1, Y2, X-as Besturing: ESA S630 besturing Inclusief Wila klembare bovenstempel

Stanje: novo, Leto izdelave: 2026, Table length: 3000 mm Table width: 1500 mm Torch heads: 1 Control: CNC Workpiece weight: 900 kg Travel speed: 91 m/min Space required, approx.: 5562 x 2270 x 2388 mm Laser cutting system with manual shuttle table Configuration: 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with mortise and tenon structure 5. Bodor servo motor and drive 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout for leftover material 9. 21.5-inch touchscreen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision feature 12. Intelligent vibration protection 13. Anti-burning mineral cast frame 14. Bodor Mango ® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Fume extraction 20. Set of wear parts CUTTING CAPACITY: Nsdpfowh Ulqex Afmocu Mild steel: 20 mm Stainless steel: 18 mm Aluminum: 14 mm Total rated machine power: 36.4 kW Total rated machine current: 69.2 A Average power consumption: 23.1 kWh OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Stanje: novo, Pressure 500 t Column clearance 600 mm Stroke 600 mm Table surface 3500 x 1500 mm Distance cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on the bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely machined with a CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet per EN standards - All cables are labeled and neatly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor Ncedefv Awhopfx Afmeu SAFETY - The machine complies with EU safety standards 2006/42/EC Machinery Directive, EN ISO 16092-1 and 16092-3 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - Price includes transport costs, installation, and training at the customer's facility. - Hydraulic oil is not included in the price. - All handling costs (e.g. crane, forklift, etc.) are to be borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer's warranty. - This warranty includes delivery of all spare parts required for repair and a service visit for the machine. Damaged parts will be returned to the manufacturer after being replaced with a new part. - This warranty does not cover parts damaged due to improper use.

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 160 t Bending length: 4000 mm Distance between uprights: 3060 mm Nedpfx Ajtqqr Refmecu Control: FORTRON CNC 10 H 4 Throat depth: 280 mm Stroke: 250 mm Installation height: 500 mm Table length: 4050 mm Table width: 280 mm Downward speed: from 70 mm/sec Upward speed: 68.4 mm/sec Working speed: 9 / 3.5 mm/sec Max. operating pressure: 205 bar Oil capacity: 400 l Total power requirement: 19.5 kW Machine weight: approx. 20.8 t Total weight incl. accessories: 22 t Machine dimensions (L x W x H): 4.8 x 1.88 x 2.93 m Control cabinet dimensions: 1.6 x 0.5 x 2.25 m - 3-axis machine - with crowning system - with graphical display Accessories: programmable backgauge, upper and lower tools, table extensions

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel range X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, positioning accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser beam diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection possible. Available from Q1 2025. Nodpfx Ast Nhm Iefmscu

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 225 t Bending length: 3050 mm Frame width: 2550 mm Throat depth: 300 mm Approach speed: 110 mm/sec Working speed: 9.0 mm/sec Return speed: 130 mm/sec Stroke: 240 mm Installation height: 320 - 560 mm Table height: 1000 mm Table width: 200 mm Oil capacity: 350 ltr. Max. operating pressure: 296 bar Air pressure: 4.5 - 6.0 bar Operating voltage: 400 Volt Total power requirement: 18.5 kW Weight: 14,900 kg Dimensions (LxWxH): 5180 x 2400 x 3100 mm - In inspected condition - Machine video - ?v=ebbbzSYMxKw ?v=lBoAylU-0Ec Equipment: Ncsdpfx Afjxaa Dtsmju - Electro-hydraulic CNC press brake - CYBELEC CNC control "ModEva 12S", swiveling, front right * High-resolution graphical 14-inch color display * Product illustration as line, surface, or solid model * Clear, easy-to-navigate menus in operator's language * Extensive tools and product library - CNC-controlled backgauge adjustment (X-axis) * X-axis gauge range from bend line: 5.0 - 1,000 mm * Adjustment speed: max. 250 mm/sec - CNC-controlled vertical adjustment of backgauge fingers (R-axis) * Adjustment range from table surface: 115 - 265 mm * Adjustment speed: max. 100 mm/sec * Adjustment via servo motors - CNC-controlled left-right adjustment of backgauge fingers (Z1+Z2 axes) * Z1 adjustment range: 405 - 2565 mm * Z2 adjustment range: 485 - 2645 mm * Adjustment speed: max. 1000 mm/sec - WILA CNC-controlled electric table crowning - Pneumatic EHT upper tool clamping - Manual lower tool clamping - 1x movable two-hand/foot control - 2x front, sliding support arms - Rear safety guard (sliding safety screen) - Side safety guard (swiveling safety screens) - 1x set EHT gooseneck upper tools - segmented (3,000 mm) - 1x set EHT lower tools - segmented (3,000 mm) - Original operating manuals (machine + control)

Stanje: rabljeno, Flame Preheating Device Roland Groß + Söhne GmbH Ring Burner for Preheating, e.g. for Weld Seam Preheating, Casting Preheating, etc. Type: 1 x 1" Ionization Serial No.: ALMA Year of manufacture: 03/20 Connection voltage: 230 Volt Max. gas pressure: 500 mbar Max. air pressure: 10 bar Max. gas flow: 30 Nm³/h Max. air flow: 300 Nm³/h Including 10 different flame ring nozzles: - Flame monitoring Hans Henning - Foldable ring nozzle made of 2 half-shells, inner Ø 310 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 400 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 490 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 500 mm, with push-fit hose coupling and ignition device, front-side outlet Nodpfx Afjdz Spwomocu - Foldable ring nozzle made of 2 half-shells, inner Ø 590 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 800 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 990 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, arc length 1500 mm, with push-fit hose coupling and ignition device, central outlet Suitable for preheating pipes and vessels. For heating steel to welding temperature. Ideal for repair welding and fabrication of welded components made from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Gas-fired heating for thermal coating applications.

Stanje: novo, Leto izdelave: 2026, Table length: 3000 mm Table width: 1500 mm Cutting heads: 1 Control: CNC Workpiece weight: 900 kg Travel speed: 91 m/min Weight: 4980 kg Space requirement approx. 5562 x 2270 x 2388 mm Laser cutting system with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Dovetail bed structure 5. Bodor servo motor and driver 6. Nitrogen control valve Nodpfxexv D T Ro Afmecu 7. Bodor Lightning perforation technology 8. Automatic nesting of remnants 9. 21.5 inch touch screen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burning mineral cast bed 14. Bodor Mango® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: MILD STEEL 35 mm STAINLESS STEEL 35 mm ALUMINIUM 25 mm Total machine rated power: 52.2 kW Total machine rated current: 99.1 A Average power consumption: 29.8 kWh OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Stanje: novo, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Pressing force: 225 t Bending length: 3050 mm Distance between uprights: 2550 mm Control type: DNC 1200PS Eco/Col Ram stroke: 700 mm Frame throat depth: 405 mm Distance table / ram: min. 320 / max. 1020 mm Total power requirement: 29.5 kW Machine weight approx.: 15,500 kg Accessories/Equipment: Rear gauge Stop carrier adjustment: - X-axis stop range (from bending line): 5–1000 mm - X-axis adjustment speed: max. 500 mm/sec Nodpfxjxb Tftj Afmscu Height adjustment: - R-axis adjustment range (from table surface): 85–235 mm - R-axis adjustment speed: max. 150 mm/sec Backgauge finger adjustment: - Z1-axis adjustment range (from left-hand edge of table): 520–2365 mm - Z1-axis adjustment speed: max. 1000 mm/sec - Z2-axis adjustment range (from left-hand edge of table): 690–2535 mm - Z2-axis adjustment speed: max. 1000 mm/sec - X1-axis adjustment range (from center position): ±125 mm - X1-axis adjustment speed: max. 250 mm/sec Die shifting – adjustment via backgauge (MVX): - Adjustment range: max. 100 mm - Adjustment speed as X-axis: 500 mm/sec Front bending aid: - Swivel angle BV1/BV2-axis: 55° - Swivel speed BV1/BV2-axis: max. 45°/sec - Lift-up force per swing arm BV1/BV2-axis: max. 1500 N

Stanje: novo, Leto izdelave: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump capacity: 22 l/min Forward speed: 9 mm/s Return speed: 13 mm/s Tank capacity: 70 l Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Ncodpfxohu H Dpe Afmou Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table & piston tip) Piston stroke: 400 mm Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 l/min – ASC Speed: forward 9 mm/s – return 13 mm/s Tank volume: 70 l Pressure regulator valve Pressure gauge indicator Pressure hold valve Weight: 2,300 kg