Sennebogen S 690 HD

Sennebogen S 690

Stanje: zelo dobro (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2000, For Sale: High-Quality Liebherr Concrete Mixing Plant in Excellent Condition – Including BIBKO Wastewater Treatment System Available for sale is a pre-owned, exceptionally well-maintained concrete mixing plant from the renowned manufacturer Liebherr. The plant stands out with its low operating hours, complete technical documentation, and original delivery condition – all assemblies originate from the manufacturer itself. Important Addition Cedpfx Aewlwrujfdord Included in the offer is a wastewater treatment unit from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and cost-effective reuse of residual and wash water, which not only reduces operational costs but also meets the ecological requirements of modern production processes. Key Technical Data Type: Planetary Mixer R 1.0 Practical Mixing Capacity: 1.0 m³ compacted concrete per batch Efficient Loading: A 6m³ truck mixer can be filled in just 6 batches Theoretical Mixing Output: 50 m³/h Practical Mixing Output: 40 m³/h Aggregate Storage Star-shaped aggregate bin: Total capacity 1,200 m³ Active storage: 65 m³ Number of aggregate components: 5 Cement Silos 2× cement silos, each 40 t with overfill protection 1× two-part cement silo, 80 t with overfill protection Condition of the Plant Commissioned: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, superbly maintained Previous owner: First owner Originality: All assemblies original from Liebherr Documentation: Fully available (electrical schematics, foundation plans, static calculations, etc.) The solid and well-conceived design of the plant allows for easy dismantling and reassembly thanks to a predominantly bolted construction. The control cabinets are connected via plug-in connectors – for further details, please refer to the attached PDF documents. Additional Services on Request: We are happy to support you with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable freight forwarders This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are happy to answer any questions you may have at any time!

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks Codpfjh Uqibex Afdord ATTENTION! We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: nepreverjeno, Basic package Selector 800 Sub-belt BB 1350 mm AA 6.4 m -profiled belt- Crjdpsvm Upnjfx Afded SPIRAL SHAFT SCREEN DECK AA254-150 - 16 shafts

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1993, številka stroja/vozila: 1590, Oprema: hidravlika, kabina, Zenith Maschinenfabrik GmbH Neunkirchen/Siegerland, DEUTSCHLAND Credpfxsucruuj Afdjd Einsatzbereich: Herstellung von vibrogepressten Betonpflastersteinen und Bordsteinen. Die Maschine ist voll funktionsfähig und wird zusammen mit 2 Mischern, Zuschlagstoffbunkern, Skippern, Verpackungsmaschine sowie 150 Produktionspaletten verkauft. Enthalten sind außerdem Formen für verschiedene Pflasterstein-Modelle. Zum Verkauf steht außerdem eine mobile Zenith 941 II A aus dem Baujahr 1978, ebenfalls mit Typenschild. Der Verkauf erfolgt, da die Maschine durch neuere Technologie ersetzt wurde.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 Crodpfx Afsirax Ujdjd -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Csdpfxjhy Tp Dj Afdjrd Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: novo, Leto izdelave: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between uprights: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed (max.): 140 mm / s R-axis travel range: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (dual guideway, aluminium) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motorized adjustment, linear guide and ball screw Backgauge finger with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design according to internationally recognized standards Electrical equipment according to internationally recognized standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Crsdpfx Afjfifg Hsdjd Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Stanje: rabljeno, 7 pieces of folding tools for a swivel bending machine, length 3000 mm. Credpfx Afeb D Ry Rjdjd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Pressing force: 170 t Bending length: 4080 mm Distance between uprights: 3680 mm Throat depth: 410 mm Installation height: 385 mm Stroke: 215 mm Approach speed: 200 mm/sec Working speed: 1-10 mm/sec Return speed: 135 mm/sec Table width: 200 mm Table height: 1050 mm Operating hours: 25,430 h Oil capacity: 350 l Total power requirement: 29 kVA Machine weight approx.: 16,450 kg Dimensions L-W-H: 4620 x 2210 x 2885 mm Machine is in well-maintained condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) – Inspected condition – Machine video – ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control – swiveling, front left * High-resolution graphic display * Clear, user-friendly menus in operator language * Large tooling and product library * Graphical 2D programming * Automatic bending sequence calculation and collision detection * Emergency stop button at the front - CNC axis configuration: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axes + CNC crowning - X axis – adjustment speed: 500 mm/sec * Max. backgauge travel: 860 mm - R axis – adjustment speed: 300 mm/sec * Max. travel: 250 mm - Z axis – adjustment speed: 1000 mm/sec * Max. travel: 3260 mm - CNC electromechanical table crowning - CNC electro-pneumatic die shifting (I axis) - WILA / TRUMPF hydraulic upper tool clamping Cjdpjxcp Rbsfx Afderd - WILA / TRUMPF hydraulic lower tool clamping - 2x heavy-duty, movable front support arms - 1x moveable two-hand/foot operation control - 1x moveable foot switch - Side safety devices (swiveling doors) - Rear safety devices (sliding doors) - Original operating manual

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Credpfjg Rn Avox Afdsd Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.