Rezkalna vretenska enota, npr. za ročične gredi

SEMA SE 100

Stanje: rabljeno, Leto izdelave: 2005, 1 used, very well-maintained crankshaft milling attachment for installation, e.g., on a lathe for milling crankshafts or other milling operations Manufacturer: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical specifications: Spindle taper ISO 50, Run-out / test mandrel L=300 mm = 0.01 mm Speed range, stepless currently set to 2,000 rpm Spindle designed for up to 3,000 rpm Drive power currently 15 kW Milling spindle designed for up to 25 kW Bearing diameter 110 mm The 2 bolted adapter plates under the milling spindle are each attached. You can use these plates for your lathe, modify them, or they may need to be newly fabricated. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special features: Milling spindle: • The milling spindle is mounted on the cross slide of your lathe • Stepless speed adjustment, frequency inverter make LENZE, rated up to 30 kW • Forward / reverse operation Ljdpjddziysfx Af Ashp • Lifetime lubricated spindle bearings • Robust design with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Drive dog gearbox for main spindle: • A long drive rod is mounted in the spindle bore and connected to the gearbox • Stepless speed adjustment, frequency inverter make LENZE • Forward / reverse operation • Jog mode fast / slow The pictures show this unit installed on a universal lathe SARO SPA 10 x 3000 for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), Oprema: Na voljo je tipska ploščica, Mobile tank systems for A1-A3 (KC diesel, KA petrol/diesel, as well as collection containers), - Double-walled construction - Capacities from 250 to 1000 litres - Partially IBC-certified - 12V / 24V / or 230V pumps available as required - Automatic dispensing nozzle - Vertical or horizontal design - Some units with lockable pump covers Lhjdogx E N Iepfx Af Ajp - Optional flow meter with daily and total counter - All systems supplied with a new DEKRA inspection Loading and transport can be organised. Only serious and genuine enquiries with the following details will be answered: Name, email address, and telephone number.

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Lhsdpfx Afjbambrj Aop Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: novo, Leto izdelave: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW – 6 kW - Ideal for your construction company or for use on your construction sites - Left-right bending possible (in the BS models) Ledpfx Ajm Shffsf Aehp - In addition to single bending, a bending sequence can also be programmed - Inserts for different rebar diameters are included in the accessories (incl. accessories) - Can be operated in automatic or manual mode - Bending capacities depending on steel strength according to table (see images) - Optionally available with digital control panel - Net weight: 215 kg – 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, feel free to contact us!

Stanje: generalkompletno obnovljen (rabljeno), Used storage tank made of steel according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" filling pipe with TW cap - 1" dip pipe with dipstick - Euroflex 3 suction assembly (max. 150 l/h) - 1 vent nozzle 2" with vent cap The tank is factory-equipped with the aforementioned fittings and is cleaned inside. Capacity: 50,000 litres Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be supplied with a new coating in the RAL colour of your choice and optionally equipped with a ladder including operator platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and we will promptly provide an exact shipping quote. Should you require any further information, please feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible – just contact us about this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst Lodpjhvmitjfx Af Ajhp

Stanje: dober (rabljeno), Universal milling head, milling holder, milling extension, angle milling head - Manufacturer: Waldrich - Spare part: removed from a milling machine - Milling head: swiveling - Quill stroke: 150 mm - Spindle taper: SK50 - Motor: 11 kW, 1470 rpm - Spindle speed: 25 - 560 rpm - Transport dimensions: 1550 x 600 x H460 mm Lhjdpfjfxlf Asx Af Asp - Weight: 636 kg

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). Lsdewdub Dspfx Af Aohp TightBlock Machine Base (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: 500 l tank, filtration system

Stanje: novo, Pressure: 600 Bending length: 6050 mm Distance between uprights: 5100 mm Installation height: 680 mm Maximum stroke: 455 mm Throat depth: 450 mm Dimensions (LxWxH): 7100 x 3275 x 3910 mm Weight approx.: 50,200 kg 4 axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphic control) CNC crowning via control: Yes, via Esa S630 (2D graphic control) Motor power: 45 kW Standard equipment: KK Kletzer Europa We have put together a high-quality model for Europe. The KK-Industries CNC press brake, made in Turkey. Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. The EUROPA XL features a very large installation height, resulting in a large stroke (cylinder travel). The throat depth is also exceptionally large to provide maximum flexibility. We focus on quality, which is reflected in the control system as well. As standard, we equip our machines with the high-grade Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC-controlled Y1, Y2, X, and R axes via the control system. Of course, CNC crowning control with Esa S640 (2D graphic control) is included as well. We also make no compromises on the top tooling and die, fitting the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Service quality is equally important: that's why we prioritize highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R Esa S640 (2D graphic control) Backgauge with dual linear guide and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel; from 175 tons, heavy-duty version on linear guide Laser protection device on upper beam CE safety equipment Various options available Alternative controls: ESA 640 2D 15" touchscreen control – €4,520 ESA 675 W 3D 21" touchscreen control (Windows-based) – €6,485 DELEM 66 T 2D 17" touchscreen control (Windows-based) – €10,165 DELEM 69 T 3D 17" touchscreen control (Windows-based) – €16,350 Lhodod Ehh Ropfx Af Ajp KK-Industries GmbH There is something here for everyone!

Leto izdelave: 1979, Stanje: rabljeno, Outreach: 22/29 mm Drive motor: at 380 V approx. 0.55 kW Space requirement: 450 x 500 x 560 mm Ledpfszif Sox Af Ashp Weight: approx. 6.5 kg Pressing force: 30 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: GM 3941/02, There are a total of 3 x Grob BZ500 available. (Please provide your offer price) Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== Lodpfxomk Utrj Af Aehp For technical data, please refer to the handout. All warranty rights are excluded. We do not assume any liability for the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling equipment, nor for compliance with all safety and environmental protection requirements listed in accident prevention regulations. No sales to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.