3-valjna krožna upogibalka SCHRODER FAST

SCHRÖDER-FASTI 136

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Rodpfx Aox Eh Iqed Tobt Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: novo, Leto izdelave: 2025, Press brake from the one and only genuine and reliable manufacturer PROD MASZ® The manufacture of modern press brakes is our passion, which we would like to share with you. At trade fairs, we share our expertise and attention to detail regarding our bending machines, which continuously improves our press brakes while never forgetting who we really work for. The quality of our press brakes is of the utmost importance to us. Rbjdpfx Adjcttgfo Tot Directly from manufacturer Prod-Masz! Brand-new, fully equipped machine straight from current production. Technical specifications: - Maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Weight: approx. 400 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) - The machine complies with CE regulations and comes with a 12-month warranty. - Delivery cost: €300.00 Rotary shear 0.8mm – plus €350 Hand seam folder plus €75 Payment in cash upon delivery Delivery: weekly We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT where applicable.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Redpfxexddamo Ad Tobt Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 2008, Used drilling center by CMA Rbsdpfxewc Ndws Ad Tst Model: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Rjdpfx Adewbhipo Tsbt

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Rodpfxjchhfus Ad Tebt Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: kot nova (razstavni stroj), dolžina mize: 500 mm, širina mize: 300 mm, Surface grinding machine Ziersch Z35 - Demo unit, unused - Grinding area: 500mm x 350mm Dressing device Rjdpsvvwf Djfx Ad Tobt Permanent magnet Belt filter system with magnetic separator

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Prebijalna sila: 220 kN, delovno območje v kombiniranem načinu X/Y: 2.585 mm/1.650 mm, delovno območje v načinu prebijanja: 3.085 mm/1.740 mm, delovno območje v laserskem načinu X/Y: 3.085 mm/1.650 mm, največja debelina pločevine (konstruktivno jeklo/nerjavno jeklo/aluminij): 8 mm/6 mm/4 mm, največja teža obdelovanca: 230 kg. Hitrost pozicioniranja: 109 m/min, največja zmogljivost hodov: 900 hodov/min, največja zmogljivost označevanja: 2.800 hodov/min, število orodnih mest: 18, natančnost: +/- 0,1 mm. Dimenzije stroja X/Y/Z: pribl. 8.000 mm/9.000 mm/2.500 mm, teža: pribl. 22.500 kg. Dokumentacija na voljo. Ogled na lokaciji možen. Predvidoma na voljo od novembra 2025. Rodpoxddagofx Ad Tjbt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Rbedpfoxzk Irex Ad Tot Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Rbodetwliwepfx Ad Tjt Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!