SCHLATTER LINIJA ZA VARJENJE MREŽE MG 24.1/8C

SCHLATTER MESH WELDING LINE MG 24.1/8C

SCHLATTER MG24 Electro-Welded Mesh Production Line

Completely refurbished

WORKING RANGE

Panel width: max. 2500 mm

Cross wire length: min. 900 mm

Cross wire length with QF5 distributor: min. 300 - 1600 mm

Distance between extreme longitudinal wires: max. 2400 mm

Mesh length (longitudinal wire length): max. 2500 - 6000 mm

Longitudinal wire spacing: min. 100 mm

Cross wire spacing: 25-250 mm
Gbodpfx Aewu Tu Dsgyji

Adjustable via cutting device (0-1)

Longitudinal wire diameter: 4.0 - 12.0 mm

Cross wire diameter: 4.0 - 12.0 mm

Number of longitudinal wires: max. 24

MG 24.1/8C MESH WELDING MACHINE, Basic equipment includes:

- 1 Machine frame
- 1 Upper support for press reception, infinitely adjustable by handwheel
- 1 Magnet supports with holding magnets and monitoring of cross wires
- 1 Row of pneumatic solenoid valves for press operation
- 1 Air and water supply installation
- 2 Pneumatic rotary actuators with oil damping
- Static torque at 5 bar compressed air: 480 Nm
- Front section continuously adjustable from: 25 - 250 mm, adjustable via cutting device (0-1)
- 1 Forward feed carriage with panel lifting device
- 1 Tool set for machine adjustment

WELDING SECTION includes:

8 Type C transformers

Rated power per transformer: 100 kVA

Secondary no-load voltage: 7.1 V

Rated secondary current: 14 kA

8 ES 130 thyristor contactors

12 Welding presses: 5.0 kN

12 Longitudinal current bridges for wire spacing: 50-100 mm

12 Longitudinal current bridges for wire spacing (for staggered wires): 100 mm

10 Longitudinal current bridges for wire spacing: 100-150 mm

8 Longitudinal current bridges for wire spacing (for staggered wires): 150 mm

6 Longitudinal current bridges for wire spacing: 150 - 200 mm

6 Longitudinal current bridges for wire spacing (for staggered wires): 200 mm

24 Lower Cu electrode holders with standard angle electrodes, each with a water-cooled current cable, width: 58 mm

24 Wire holding clamps

Panel width: max. 2500 mm

Cross wire length: min. 900 mm

Cross wire length with QF5 dispenser: min. 300 - 1600 mm

Spacing between extreme longitudinal wires: max. 2400 mm

Mesh length (longitudinal wire length): max. 2500 - 6000 mm

Spacing between longitudinal wires: min. 100 mm

Spacing between cross wires: 25-250 mm

Longitudinal wire diameter: 4.0 - 12.0 mm

Cross wire diameter: 4.0 - 12.0 mm

Number of longitudinal wires: max. 24

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.