Center za razrez in obdelavo

Schirmer BAZH 1000-G2/VU SBZ

Schirmer Cutting and Machining Center Type BAZ 1000-G2/VU
Profile Processing Center Type SBZ
- Cutting and machining center – feed direction from right to left
- Automatic loading magazine for manual loading of 12 profiles, max. profile length 6500mm, automatic transfer station to the gripper conveyor
- Infeed device for PVC profiles with NC-positioned gripper, driven by a high-dynamic linear servo motor.
- Automatically adjustable profile guides for varying support contours within the profiles
Codpjwkq Igofx Aa Rsrh
- Machining station designed as G-module, with 3 servo axes including clamping elements, fully integrated into the control system. The station is equipped with high-frequency electric motors for the following processes on PVC profiles:
o Drainage and ventilation slot drillings in frame, sash, mullion, transom and muntin
o Lock case milling on window sashes, front and side door sashes
o Marking drillings for screw connections of mullions, transoms and connectors from inside
o Profile cylinder and handle cut-outs on HAT sash
o Door plate mounting drillings
o Hinge pin drillings 2x6mm / 3x2.5mm
- Complete VU saw section with double saw unit 2x45° for simultaneous cutting of head and tail as well as notching cuts for welded transoms. Saw feed controlled by servo axis via linear servo motor; height adjustment with servo axis via ball screw spindle.
- Gasket tensioner above the VU saw
- Conveyor belt for removal of PVC waste from the VU saw area
- Standard saw unit with 1 saw aggregate for head and tail cuts, stepless NC-controlled swivel drive, swivel range +45° to -45° for saw blades up to 550mm diameter, saw motor rated at 2.5 kW
- Horizontal buffer conveyor for cycle-independent transport of profiles from the BAZ to the steel infeed station, as well as to the screwing station and SBZ
- Steel infeed station for manual insertion of steel reinforcements with 12 infeed slots
(The 1st and 2nd steel infeed slots have clamps to hold the PVC profiles during manual reinforcement)
- Monitor as steel length display for the steel infeed, including control unit
(8 steel positions displayed)
- Screwing station for the horizontal buffer conveyor, working from above and below, with frequency-controlled electric screw driving unit, for screwing the steel reinforcement into the frame, sash and mullion/transom profiles. Configured for self-drilling screws 3.9x16mm, including infeed with NC-positioned gripper driven by high-dynamic linear servo motor.
- Additional screwing station with automatic screw feed
- Drilling station as steel module, with 2 servo axes for drilling stroke and horizontal adjustment
- Automatic label printer with dispensing system. Labels are manually affixed to the profiles
- PC-based machine control / control cabinet PC C6140-0010 (TwinCat) enclosure
7-slot ATX industrial PC for control cabinet installation
3 PCI slots for cards up to 270mm in length, 3 PCI slots for cards up to 240mm
Drives and cards easily accessible
Processor Intel Pentium 4, 2.4 GHz
ATX motherboard for Pentium 4
6 PCI slots, 1GB DDR-Ram, upgradeable to 2GB
On-board graphics adapter,
On-board Ethernet adapter
IDE hard disk 40GB
1.44MB floppy disk drive

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.