Rezkalni stroj

Schüco MFM AF 200

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Kodpfx Ajx E Ahzel Nelr Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Leto izdelave: 2005, obratovalne ure: 900 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalna žaga GMM - Lexta 36 (4 osi) Večnamenska žaga za marmor, granit in kamen, ki zagotavlja visoko natančnost in enostavno uporabo. Značilnosti: - 4 osi - Miza: 3540x1850 mm - Disk: premer 800 mm Klodpox A A Nwjfx Al Njr - Zanesljiv in enostaven za uporabo stroj

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: XZ 10480, največja hitrost vrtenja: 3.500 obr/min, Stroj v delovnem stanju / 400 FCRO 32 mm / Žagalni stroj za industrijo penaste mase, Ksdpfsw Iwaiox Al Nolr Tip Panda 400, M80, Moč 1,9 kW, Leto izdelave 2014, Žagin list 400 mm, Skupne dimenzije: 1155 x 100 x 140 cm (z valjčnimi mizami), Dimenzije brez valjčnih miz: 71 x 100 x 140 cm.

Leto izdelave: 2018, stanje: dober (rabljeno), For machining aluminium and steel profiles Kedpfx Alsx Diqws Nelr Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Automatic clamp positioning Two separate work zones suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X-/Y-/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Kljdpju Nigkefx Al Nor Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW Klodpjuiy Ngofx Al Nsr - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: 9182, Offer 23168 Technical Data: Klsdpfomb U E Aex Al Njr - Notching options and miter cuts in 3 planes - Right-angled, single-sided, double-sided, and triple-sided bevel cuts - Can be used as a shifting cut-off saw - Pneumatic profile clamping - Processing with semi-automatic saw units - Saw blade dimensions - vertical: 500 x 3.5 x 40 mm, positive - horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade 60°–90°–25°, motorized positioning with digital display - Saw blade swivel range horizontal with vertical saw blade: - 45° – 90° – 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Manual profile stop shoulder, swivels 30°–90°–45° - Pneumatic coolant spray device - Air supply: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 x D 1400 mm - Weight approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 - 4 osi - Premiki X/Y/Z = 7400-7600/850/650 mm - Osa A 0-180 stopinj - Hitri premiki 60-65 m/min - Vreteno 24000 RPM, 11 kW S1 - ATC z 8 pozicijami - 2442 ur rezanja vretena - Pod napetostjo - Zelo dobro stanje Klodpfjyl Shvjx Al Nsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions Kledpfxex D Irmj Al Ner • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: dober (rabljeno), Leto izdelave: 2009, v dobrem delovnem stanju, DG244/E555/1, 6 metrov Kodpstuvg Djfx Al Nolr