Oprema za drobljenje

SBM-Wageneder SANDVIK Jawmaster JM 1208:09

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed Rodpovwlqqsfx Ad Tsbt - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, - Concasseur à percussion primaire, marque Laron, modèle IM 16 - Ensemble complet disponible en version mobile ou stationnaire. - Roulements du rotor neufs - Barres de percussion du rotor neuves - Platine frontale presque neuve - Capacité de production : 800 t/h - Ouverture d’alimentation : 2320 x 1700 mm. Moteur de 600 ch. Rbodpfjimwg Hjx Ad Tot - Roulements et supports neufs - Barres de percussion du rotor neuves - Alimentateur à tablier articulé : largeur 2 000 mm, longueur 10 000 mm. Réducteur et moteur 40 ch. État de l’alimentateur : quasi neuf. - Pré-tamiseur à disques : largeur 2 000 mm, diamètre 1 000 mm. Réducteur et moteur électrique. - Trémie d’une capacité de 40 m³. Assemblée boulonnée, démontable en plusieurs morceaux pour le transport. - L’ensemble est monté sur un châssis doté d’une attache pour tracteur routier et transportable sur essieux dolly. Nous disposons également de broyeurs secondaires à marteaux, de cribles et de convoyeurs pour compléter une installation clé en main.

Stanje: dober (rabljeno), Ponujamo rabljeni dvojni čeljustni drobilnik znamke Krupp. Dobro ohranjen, popolnoma delujoč. 500 x 300 mm, 15 kW, nova orodja. Motor je trenutno v prenovi. Rjdpfswy U Icjx Ad Tebt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1995, KLEEMANN stationary crushing plant 1000x900 mm Rbodper A Dm Sefx Ad Tet Manufacturer: Kleemann Year of construction: 1995 Model: SHB 10/90 Feed opening: 1020 x 900 mm Crusher weight: approx. 14.9 t

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Rbedpjra A E Usfx Ad Tst - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Leto izdelave: 2001, Stanje: dober (rabljeno), HSM-500.1_VL BALER PAPER BALER FILM BALER Immediately operational, good CONDITION Used & good / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Press force: 50 tons Voltage: 400V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Compression force: 6 tons Year of manufacture: 2001 Additional balers available in our other listings Item used and in good condition / roughly cleaned (Plug in and ready to operate) Dimensions: On request!! Additional photos show potential usage options. All items visible in the photos are also available from us. Price quoted is net per unit Ex works 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or enquire by phone General information: We offer items acquired from various liquidations, described to the best of our ability, and provide clear photos. Further details about the item cannot be provided. We offer the opportunity for viewing by appointment on Tuesdays and Thursdays between 9 am and 4 pm. If needed, the item can be taken immediately. Redpfx Adslc Du No Tsbt We can only respond to enquiries about this listing if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this listing concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound as far as can be determined. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. If interested, feel free to call. All dimensions are approximate. Errors and omissions excepted.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hard rock chipping plant – essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Metering bunker SANDVIK H-200 cone crushing unit with pre-screen Metering bunker with discharge conveyor Rbjdpfx Asufih Dsd Tst 2 x double-deck screening plants, approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm diverse conveyor and stockpile belts complete electrical installation with control cabinet in container

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Največja zmogljivost upogibanja: 18,0 mm Predupogib: 12,0 mm Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Redpfx Aoxruvzed Tsbt Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Materials to be compacted: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, Styrofoam HSM V-Press 860 Plus Baler, year 2013-2015, price: €7,500 HSM V-Press 860 L Baler, year 2015, price: €9,000 HSM V-Press 860 Plus Baler, year 2019, price: €9,000 HSM V-Press 860, new, ex-demo unit, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical Data: Dimensions (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle (sec): 35 Rbedpfx Adjra Rbgo Tot Pressing force (t): 54 Power supply (V): 400 (three phase) HSM V-Press 860 Plus B Baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale length x width x height: 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Dimensions (W x D x H): 2099 x 1245 x 2985 mm Weight: 2336 kg Binding material: wire Materials to be compacted: film, cardboard Idle cycle time: 25 s

Stanje: rabljeno, Leto izdelave: 1986, Contact ATS Norway for further information. Please quote the reference number upon inquiry: 20528 Specifications: - Year of manufacture: 1986 - Operating hours unknown Rbodewpic Hjpfx Ad Tjt - Feed box - Side discharge conveyor - Maintenance performed by the owner - Screening unit - Conveyor belt - Available immediately Description: We have a Haahjem CTC 110 crusher with side discharge conveyor and screening unit for sale, year 1986. The crushing plant’s operating hours are unknown, as the hour meter does not display any figures. All servicing has been handled by the owner. There is a damaged bearing on the left-hand side. Some costs should be anticipated to remedy this issue. Available for immediate delivery. Operating weight: Model: CTC110