Težka prikolica

SAGO TPW 18 VL-LK - 18T NEU

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm Nlsdpfxonfvx Ne Ab Isi • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Nsdpfot Hdh Nox Ab Ijli Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h The compressor is fully operational

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Nlodpfxefrzvls Ab Ioi Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer featuring: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Nodpfxjfnh Tgs Ab Ioli Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Nodpfocxxx Rex Ab Ioli Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Leto izdelave: 1989, Stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade length: 6300 mm Table height: 700 mm Drive power: 5.5 kW Cutting speed: 20–130 m/min Nlodjrc I H Ejpfx Ab Isi Minimum cut-off length: 6 mm Minimum diameter: 10 mm Machine weight: approx. 2.9 t Space requirements: approx. 2.4 x 3.3 x 2.4 m Fully automatic bandsaw. Bandsaw blade tension hydraulic, cutting feed infinitely variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400–2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, max. working width: 2520 mm for sheets up to: 1.5 mm upper beam opening: 180 mm bending beam adjustment: 40 mm bending angle setting: 135° weight: 1970 kg Nljdpfeqi Awwex Ab Iji space requirement: 3630 x 750 x 1250 mm

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- Nljdpfxewbh Ifs Ab Isi IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Mill Plus, dolžina mize: 700 mm, največja hitrost vretena: 12.000 obr/min, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar Operating mode 4 for machining with the door open. Blum laser for tool measurement and tool breakage control. Njdpfx Aeu S A Anob Isli Preparation for Blum 3D probe. Probe not included in the scope of delivery.

Leto izdelave: 2000, obratovalne ure: 50 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10.000 mm, glavna hitrost dviga: 6.300 mm/min, Double Girder Crab 16/4t, 2 units available Consisting of: Main Hoist 16t with mechanical micro speed Type: AS6040-25 4/1 L2 Reeving: 4/1 Lifting speeds: 6.3 / 0.63 m/min Lifting height: 10 m FEM 3M Double hook block Auxiliary Hoist 4t Type: SH5020-25 2/1 Reeving: 2/1 Lifting speeds: 12.5 / 2 m/min Nedpforbyqkox Ab Ijli Lifting height: 12 m FEM 2M Single hook block Excellent condition, barely used, including load spectrum memory and load summation, with bottom block, electrics 400/230V, crab track gauge 1400mm, crab travel speed 20/5 m/min