Težka prikolica

SAGO TPW 18 AL-AS - 18T - NEU

Stanje: rabljeno, številka stroja/vozila: 001634U, na prodaj Nedpfsw Ighcex Aazsdd Enonosi žerjav ± 11.690 mm x 10 t

Stanje: zelo dobro (rabljeno), Panel dividing saw – horizontal – with rear lift table Control: MCS Evolution Software included Lift table (mm) No. 1 rear pusher Program pusher, split function No. 9 grippers Max. cutting width (mm): 3300 Useful stroke of pusher (mm): 3300 Nodpfx Aop R Sdheazedd Max. saw blade projection (mm): 105 Max. gripper opening (mm): 105 Scoring saw (max. blade diameter): 200 mm Main saw (max. blade diameter / power): 360 mm / 18 kW Adjustable saw carriage feed rate (m/min): 5–120 No. 3 front air cushion tables Total connected load (kW): approx. 21

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA Ndsdpjgvkkzefx Aazod

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function Nodpjnfvx Nefx Aazjdd • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Load capacity: 30,000 kg Length: 8,000 mm Width: 2,500 mm Height: 790 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 / twin wheels Machine weight: approx. 3.7 t Space required: approx. 9.9 x 2.5 x 0.8 m Heavy-duty trailer featuring - Double steering - Small turning radius - Tip-proof due to steering angle limitation - Extremely robust design, resulting in low maintenance requirements - Removable drawbar, length 1,320 mm - Impregnated wooden platform Ndodpfofrzv Eox Aazod - Standard paint finish changes. Optional painting in your RAL colour available upon request. Other load capacities and dimensions available on request. Please contact us.

Stanje: rabljeno, Leto izdelave: 1953, Turning length / mm Swing diameter over the table // mm Faceplate diameter / mm Faceplate diameter: approx. 3600 mm Centre height over the table: approx. 1500 mm Swing diameter over table: 2600 mm Nsdpfx Aaeua Iw Tozodd Swing diameter in pit: 3600 mm Swing diameter over bed: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at faceplate: 5000 mkg Faceplate ring gear pitch diameter: 1900 mm Main spindle bore: 120 mm Speed range normal: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Total weight: approx. 42.5 tonnes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h The compressor is fully operational Nedpfx Aast Hdh Nezodd

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer featuring: - Double turntable steering - Small turning radius Nsdpfxefrzvle Aazodd - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg Nsdsfnh Tgepfx Aazsdd The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: rabljeno, Leto izdelave: 1998, Thread diameter 72 mm Ndjdpfjv Irh Rsx Aazod Thread length 200 mm Bolt threads from 6 - 72 mm Bolt threads from 1/16 - 2 3/4" Inch threads 1/4 - 2 3/4 - 1/16 - 2 1/2" Cutting head speed 35 + 70 rpm Pipe threads 16-63 mm Pipe threads 1/16 - 2 1/2" Total power requirement 2000/2300 watts Machine weight approx. 227 kg Space requirement approx. 1.2 x 0.6 x 1.2 m The thread cutting machine "REMS Unimat 75" is a high-performance unit for efficient cutting of bolt and pipe threads. Operating principle: stationary material – rotating head, manual, self-centering vice, pole-reversible motor, automatic lubricant cooling, drive via robust planetary gearbox, right and left rotation, thread cutting head for Strehler thread cutting dies. The Strehler dies are, according to the previous owner, regrindable. Electrically interlocked safety cover. Included is a 2 x 1 m base tray which is placed under the machine, with 2 grille inserts. Year of manufacture estimated. The machine was overhauled by Rems around 2015 and has barely been used since, as external threads have been produced on other machines. Since then, the machine has been in storage and is now being sold. Please note: current new price is €26,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCKED DEALER WITH OWN STORAGE AREA OF 1,600 m².