Stroj za zarezovanje

SAFAN TU 3.U.250

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Bledpfx Afjg Ip Efoqsr Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Blodjxddamopfx Afqsr Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 1989, Leto izdelave 1989 Kotna prislon 30 -120 stopinj Dobro stanje. z ... prislonom Teža 600 kg Bjdpfx Afjliuihoqjlr +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega predstavitev pod napetostjo ali izdelava videoposnetka nista mogoča. Naš oglas vsebuje že najbolj reprezentativne fotografije v najvišji možni kakovosti. Pošiljanje dodatnih slik žal ni možno. +++++

Stanje: dober (rabljeno), Max. welding output 20 kVA Short-circuit power 25 kVA Rated output at 50% duty cycle 10 kVA Throat depth 500 mm Max. secondary short-circuit current 10 kA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Bjdpfsfi Tl Hjx Afqslr Weight 200 kg Accessories / Special features: • Water cooling via external connection • Adjustable weld time 0 - 10 • Adjustable electrode force via spring adjustment • Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 kA, a maximum sheet thickness (mild steel) of 2.5 mm can be welded. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, LVD Press Brake 4000 x 200T Type: PPBL 200/40 Capacity: 4000 x 200T Bedpfx Afjwtmi Eeqjlr Maximum stroke: 150 mm Weight: 13.5T With mobile blade holder rack

Stanje: rabljeno, Leto izdelave: 2001, Širina materiala 410 mm Teža koluta 2,0 t Notranji premer koluta 380 - 520 mm Zunanji premer koluta 1400 mm Pogonska moč 2,2 + 1,1 kW Teža razpršilne glave 0,7 t Prostor za razpršilno glavo (ŠxGxV) 1,4 x 1,4 x 1,65 mm Bljdpevut Thofx Afqsr Teža odvzemne enote 1,15 t Prostor za odvzemno enoto (ŠxGxV) 1,7 x 1,1 x 2,2 m Razpršilna glava 2370 DFPS brez pogona, s pnevmatsko zavornim sistemom, hidravličnim centralnim raztezanjem, pnevmatsko pritrdilno napravo Odvzemna enota / hidravlična naprava za pomoč pri uvajanju 235 D s tekoče nastavljivim pogonom, krmiljenje zank traku z ultrazvokom Debelina materiala do pribl. 6,0 mm Premer izvlečne valjčne osi pribl. 160 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, EUROMAC NOTCHING MACHINE MULTI 220/6R Maximum cutting length: 220 mm Maximum sheet thickness: 6 mm Variable cutting angle: 30° - 120° WITH PUNCHING UNIT 2-station notching and bending machine EUROMAC type Multi 220/6R Press brake, press brake, cutting machine Cutting capacity: steel up to 6 mm at 45 kg/mm² 4 mm for stainless steel Station I (notching) Notching angle: 60° to 140° (with special blades: 30° to 140°) Blade length: 220 mm Table dimensions: 950 x 640 mm - Manual angle adjustment by handwheels - Notching angle with integrated blade set from 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade gap adjustment - Sheet holding device - Integrated graduated scales in the table - Stop guides with angle adjustment - Operated by foot switch Station II (tool bending device) Press force: 18 tons Table dimensions: 950 x 340 mm Working height: 1100 mm - Adjustable lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4 x 90° prisms, length = 415 mm - Upper tool 90°, length = 415 mm Motor power: 4 kW Bjdpfewqdfxox Afqjlr Power supply: 400 V, 50 Hz Dimensions: 1150 x 1000 x 1250 mm Weight: 900 kg

Stanje: dober (rabljeno), Used notching machine from Euromac Bjdpfxjwprmhj Afqjlr Model: 250 4 S Capacity: 250 x 250 x 4 mm

Stanje: rabljeno, Debelina pločevine: 6 mm Dolžina rezila: 220 mm Kot nastavljiv v razponu Površina mize: 1000 x 800 mm Teža stroja cca. 0,9 t Mere D x Š x V: 1,3 x 1,3 x 1,4 m Hidravlični izsekovalni stroj - nožni pedal - 2 kosa pločevinskega naslona Bljdevki Exspfx Afqer

Leto izdelave: 1985, Stanje: rabljeno, številka stroja/vozila: 112-176, Technical data: - Bending operation, motorized, with automatic or manual mode - Bending capacity for square steel ST 37 up to approx. 25 mm - Bending capacity for flat steel ST 37 up to approx. 30 x 8 mm - Bending length between rotation units adjustable up to approx. 1000 mm - Faceplate with various profile hole mountings - Tailstock / counter support - Preselection for bending time / preselection for torsion bending length - Clockwise and counterclockwise operation - Space requirement approx. W 1750 x H 1100 x D 500 mm - Drive 400 V / 0.75 kW Bledpfjc I Snzsx Afqjr - Weight approx. 150 kg