Varilna enota

Saf-Fro Safmig 300 BLX

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Tedpfx Ajcxxrrobgsf Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Leto izdelave: 1972, Stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Tjdeb Tdquepfx Abgsf Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: pripravljen za uporabo (rabljen), Control range: 30 - 300 A Tsdpjwvixuofx Abgef Max. welding current at 60% duty cycle: 240 A Max. welding current at 100% duty cycle: 180 A Electrical connection: 400 V kW Dimensions (L x W x H): 1050 x 450 x 810 mm Weight: 132 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, Donewell press brake Type: 80-2500 Todpfxjqgcqis Abgsf Control unit: Cybelec CP 9220 Pressing force: 80 t Working width: 2540 mm Year of manufacture: 1980 Dimensions: 255x130x265 cm (LxWxH) Weight: approx. 6300 kg

Leto izdelave: 1978, Stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Tedpfx Abelp U Dpjgef Pressing time

Stanje: rabljeno, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram face: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram face with 4 x M16 threads and 20 mm guide slot, centrally located centering bore Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Tjdpfx Asd Swtaobgef Good condition

Stanje: novo, Leto izdelave: 2025, The CORMAK ZX 40BPC is a robust drill-milling machine for metalworking. It features a spindle head rotation of +/- 90 degrees, spindle head tilting of +/- 90 degrees, automatic spindle feed, right and left spindle rotation, large working table, liquid cooling, and optional automatic longitudinal table feed (X-axis). It is equipped with a powerful two-speed 1.5 kW motor and allows for drilling up to 40 mm. Spindle speeds reach up to 3200 rpm. CORMAK Product Features: - Durability – All machines and tools are manufactured from the highest quality materials, ensuring longevity and reliability in operation. - Precision – Advanced production technologies provide precise operation, essential for accuracy in metalworking tasks. - Innovation – Technical solutions applied in these products improve operational efficiency and user convenience. CORMAK is a continuously growing brand, gaining new satisfied customers worldwide in both woodworking and metalworking sectors. - Adjustable working flexibility – Thanks to the rotating head and height-adjustable design. - Threading function and reversible spindle – Enables increased versatility for various operations. - Precise depth adjustment – Via a three-arm handle and fine feed handwheel with scale. - Automatic spindle feed – For enhanced drilling precision and convenience. - Advanced oil-bath gearbox – Equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – Solid base guarantees secure placement and eliminates vibrations during operation. - High efficiency – Powerful motor ensures effective drilling even in hard materials. - Durable column – Precisely ground surface provides rigidity and operating accuracy. - Safety guard – Tilting clamp guard made of plexiglass for additional operator protection. - Heavy-duty cast column – Guarantees high working accuracy and long machine life. Tsdpfx Abovxhfmjgof - Work table with T-slots (14 mm) – Allows quick setup of vises and other accessories. - Cooling system – Standard equipment for safe, efficient work during extended operations. Technical Specifications: Maximum Drilling Capacity (Steel/Cast Iron): 32/40 mm Max Face Milling Width: 80 mm Max End Milling Width: 22 mm Spindle Travel: 125 mm Spindle Taper: MT4 Number of Speeds: 12 Spindle Speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max Distance from Spindle End to Table: 735 mm Max Distance from Spindle End to Base: 1245 mm Distance from Spindle to Column Surface: 272 mm Work Table Dimensions: 730x210 mm Base Dimensions: 690x520 mm Motor Power S1: 1.1/1.5 kW (1.5/2.0 PS) Motor Power S6: 1.7/2.2 kW (2.25/3.0 PS) Coolant Motor Power: 40 W Overall Dimensions (H with Base): 1200x1000x910 mm Weight: 380 kg

Stanje: dober (rabljeno), Proizvajalec: WEINGARTEN Tjdon D Ebaepfx Abgef Tip: ER 125 Velikost mize: 800x620 mm Na nosilnem delu stiskalnice je vidna majhna razpoka; bila je tako uporabljena leta. !!

Stanje: novo, Leto izdelave: 2025, Planer-Thicknessers and Jointers Offered by Cormak Our shop features a wide range of professional, versatile planer-thicknessers that combine stable operation with precise surface finishing—all at a competitive price point. Unlock tools that accelerate your production and enhance the quality of your wooden products, even for amateur use in home workshops. With Cormak, satisfaction is guaranteed. Construction and Operation of the Planer-Thicknesser - Table: The thicknessing table is made from high-quality, ground cast iron with a polished working surface rated at Ra 1.6. Table height is adjusted using a large, ergonomic handwheel, which can be locked in place with a quick-action eccentric lever. - Knives: The key component of a planer, these are located above or below the table and are responsible for removing excess material from the wood's surface. The knives can be mounted to a rotating cutter block or cutting head. - Motor: The planer is powered by an electric motor that delivers the energy required to drive the cutter blocks or milling head. - Cutter Block Guard: The guard can be adjusted as needed, with settings for height, angle, and extension. - Feed Mechanism: This woodworking machine is equipped with feed rollers (driving and driven), positioned very close to the cutter block, allowing even relatively short pieces to be processed. The feed rollers are chain-driven, ensuring slip-free operation (no ‘stepping’ of the workpiece). - Guides: Guides help to maintain smooth, even movement of the workpiece. The adjustable fence allows for angles anywhere between 90° and 45°. - Stability: The machine’s robust weight delivers excellent stability, providing safe, vibration-free operation thanks to additional anti-vibration feet. - Ease of Use: Adjustments are straightforward, and switching between planing and thicknessing modes takes only a few seconds. Technical Specifications for Woodworking Thickness Planer: - Cutter Block Diameter [mm]: 75 - Cutter Block Speed [rpm]: 4000 - Extraction Port Diameter [mm]: 100 - Tilting Fence Angle [°]: 0 – 45 - Number of Knives: 3 - Knife Dimensions [mm]: 250x30x3 Tsdpfx Abjvxh Nxsgef - Maximum Jointing Width [mm]: 254 - Maximum Thicknessing Width [mm]: 254 - Maximum Planing Height [mm]: 180 - Max Thicknessing Depth of Cut [mm]: 3 - Max Jointing Depth of Cut [mm]: 2.5 - Thicknesser Feed Rate [m/min]: 6 - Dimensions (L x W) [mm]: 1080 x 260 - Gross Weight [kg]: 152 - Motor Power: 2.6 kW - Power Supply: 230V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Hämmerle AP 250-2100 Series 3 Year of manufacture: 1988, completely overhauled with CE certification and new control system in 2003 Equipped with electronically controlled ram and NC backgauge system Control: Adcoband, including new switch guard and safety monitoring in conjunction with A2 backgauge system. Press force: 2,500 kN Tedjhw Rbzspfx Abgsf Bending length: 2,100 mm Weight: 22,000 kg Height: 3,100 mm Width: 2,900 mm Length: 3,400 mm Offer on request