Stroj za rezkanje

Sachman T10 HS

Stanje: rabljeno, Leto izdelave: 1998, 2-Colour Offset Printing Press Shinohara 66-2 Year of manufacture: 1998 Impressions (millions): 79 Machine Control Bdedpfxswahvaj Afqek - Shinohara console Printing Units - Number of printing units: 2 - Perfecting: none (straight printing) - SAPC semi-automatic plate change - Cooling system - Dampening system: Shinohara Delivery - Standard pile delivery - Powder sprayer: OxyDry Accessories - Plate bender: on delivery Max. printing speed (sheets/hour): 11,000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0.4

Stanje: rabljeno, CNC Travelling Column Boring and Milling Machine ANAYAK Type HVM-3800-P Bed Type Milling Machine, design similar to a plate boring machine with fixed table Machine No.: M-20021203 Year of Manufacture: 2002 "Refurbished 2025" The machine will be workshop-refurbished in 2025 and can then be inspected at our warehouse in 37235 Hessisch Lichtenau. Travels: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Bedsxcgtgspfx Afqjdk Table size: 3800 x 1200 mm T-slots: 8 x 22 mm, spacing 130 mm Table load max. 25 t (stationary table – almost unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (pull stud DIN 69872-B) Spindle speed: 60–4000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic 30-position tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydromechanical tool clamping - Orthogonal milling head can be fully automatically swivelled in two 45° planes – B+C axis - Control: HEIDENHAIN iTNC 530, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – can be mounted - Free-standing control cabinet - Chip conveyor mounted between travelling column bed and machine table - 32,078 operating hours read - Coolant system - Freestanding hydraulic unit - Operating manual with circuit diagrams Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 t Good condition

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.600 mm, moč vretenovega motorja: 45 W, največja hitrost vretena: 1.500 obr/min, potovalna razdalja osi X: 1.200 mm, pomik po osi Z: 900 mm, hitro pomikanje X-os: 10.000 m/min, hitri pomik na osi Z: 10.000 m/min, CNC Vertical Lathe Daewoo Doosan PUMA V-1200M, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for applications in heavy-duty and industrial sectors. Main technical characteristics: Maximum turning and swing diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Bdsdpfx Afowt S Rhjqjk Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning: 0.001° Main spindle: Speed: 2 to 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: ISO-50 taper Speed: 15 to 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 positions, for BT-50 type tools Max tool diameter: Ø 400 mm Max tool length: 450 mm Max tool weight: 50 kg Maximum total tool weight in magazine: 600 kg Feed rates: Rapid feeds X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration A robust and high-performance machine for vertical machining of large and high-precision parts.

Stanje: dober (rabljeno), Leto izdelave: 2008, Pomiki X Y Z: 3000 x 1300 x 2000 mm, Miza: 2000 x 1600 mm, Nosilnost mize: 13.000 kg, Os B: 360 stopinj, Bdjdevz A Rijpfx Afqek Heidenhain iTNC530, Vreteno s stožcem ISO SK50, Hitrost vretena: 5.000 obr./min., Izmenjevalec orodij za 60 orodij, Hladilni sistem, varnostne zaščite z medlocko.

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross traverse: 920 mm, intermittent cross feed: 750 mm/stroke, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic table dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1,000 h, cycle hours: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. An on-site inspection is possible. Bdedpswi Tpkofx Afqek

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Used Ziegra UBE 10,000-2 ice machine set on R404A, capable of producing up to 10,000 kg of stream ice per 24 hours. The set is complete with 4 Ziegra 1500 / 2500 ice machines, 2 Bitzer 6G-30.2Y-40P semi-hermetic piston compressors, each equipped with its own suction accumulator, oil separator, liquid receiver, and liquid line filter drier. Furthermore, the ice machine set comes with 2 ECO ACE62B4H condensers and a Siemens Simatic touch panel. If you require further information, please do not hesitate to contact us. Bsdpfxov Ubc Ds Afqjdk

Stanje: novo, Leto izdelave: 2023, Standby power 20 kVA (16 kW) Full load 17.5 kVA (14 kW) Voltage 230/400V Generator output 16 kW Continuous generator output 14 kW Number of phases 3 ECU adjustment Tank capacity 60 l Liquid cooling Frequency 50Hz Speed 1500 rpm Engine type: inline engine, 4-cylinder, naturally aspirated Cylinder bore and stroke 98 x 105 mm Displacement 3.2 liters Oil capacity approx. 3 l (between min./max. on dipstick) Coolant capacity approx. 5 l Diesel fuel Compression ratio 17.2:1 Central controller DATAKOM D300 Insulation class (generator) H Number of windings (generator) 12 Degree of protection (generator) IP23 Shunt excitation type Voltage regulation (alternator) +/- 1% Overall dimensions (L x W x H) 2000 x 900 x 1070 mm Emission standard EURO III Weight 730 kg Bodpfx Afei Nthqjqjdk

Stanje: generalkompletno obnovljen (rabljeno), Machine completely overhauled With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm Bedpowhk Uuofx Afqodk With internal grinding attachment Various accessories included MARCELS MASCHINEN AG

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 Bdsdpfxjd Nt Rqj Afqjk FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, 1 almost new CNC travelling column bed-type milling machine Manufacturer: Soraluce Model: FL 8000 Year of manufacture: 2014 Control system: Siemens 840 D Solution Line Technical data: Travels X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Clamping plate area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: - Tool magazine - Controlled universal milling head - Chip conveyor - Full enclosure - Complete coolant system - Electronic handwheel Bdedpewzx Ntefx Afqjk - Through-spindle coolant (IKZ) - Indexing clamp - Carousel rotary table D = 1600 mm, 250 rpm - Plate field 6000 x 2000 mm - Planer slide, etc.